1,991 research outputs found
28 GHz 5G Radio over Fiber using UF-OFDM with Optical Heterodyning
A 5G millimeter-wave radio over fibre optical fronthaul system based on optical heterodyning, utilising an externally injected gain switched distributed feedback laser, is successfully demonstrated. Five bands of UF-OFDM are transmitted over 25 km of fibre and a 28 GHz Vivaldi Antenna wireless link. Transmission performance below the 7% FEC limit is achieved with an aggregate total data rate of 4.56 Gb/s
The National Women's Health Study: assembly and description of a population-based reproductive cohort
BACKGROUND: Miscarriage is a common event but is remarkably difficult to measure in epidemiological studies. Few large-scale population-based studies have been conducted in the UK. METHODS: This was a population-based two-stage postal survey of reproductive histories of adult women living in the United Kingdom in 2001, sampled from the electronic electoral roll. In Stage 1 a short "screening" questionnaire was sent to over 60,000 randomly selected women in order to identify those aged 55 and under who had ever been pregnant or ever attempted to achieve a pregnancy, from whom a brief reproductive history was requested. Stage 2 involved a more lengthy questionnaire requesting detailed information on every pregnancy (and fertility problems), and questions relating to socio-demographic, behavioural and other factors for the most recent pregnancy in order to examine risk factors for miscarriage. Data on stillbirth, multiple birth and maternal age are compared to national data in order to assess response bias. RESULTS: The response rate was 49% for Stage 1 and 73% for the more targeted Stage 2. A total of 26,050 questionnaires were returned in Stage 1. Of the 17,748 women who were eligible on the grounds of age, 27% reported that they had never been pregnant and had never attempted to conceive a child. The remaining 13,035 women reported a total of 30,661 pregnancies. Comparison of key reproductive indicators (stillbirth and multiple birth rates and maternal age at first birth) with national statistics showed that the data look remarkably similar to the general population. CONCLUSIONS: This study has enabled the assembly of a large population-based dataset of women's reproductive histories which appears unbiased compared to the general UK population and which will enable investigation of hard-to-measure outcomes such as miscarriage and infertility
Co-evolution of density and topology in a simple model of city formation
We study the influence that population density and the road network have on
each others' growth and evolution. We use a simple model of formation and
evolution of city roads which reproduces the most important empirical features
of street networks in cities. Within this framework, we explicitely introduce
the topology of the road network and analyze how it evolves and interact with
the evolution of population density. We show that accessibility issues -pushing
individuals to get closer to high centrality nodes- lead to high density
regions and the appearance of densely populated centers. In particular, this
model reproduces the empirical fact that the density profile decreases
exponentially from a core district. In this simplified model, the size of the
core district depends on the relative importance of transportation and rent
costs.Comment: 13 pages, 13 figure
Remote data collection for public health research in a COVID-19 era: ethical implications, challenges and opportunities.
Physical distancing measures have lead many public health researchers to transition to remote data collection, via mobile phones, online or other virtual platforms. These methods pose a number of challenges related to obtaining informed consent
Targeted hepatitis C antibody testing interventions: a systematic review and meta-analysis
Testing for hepatitis C virus (HCV) infection may reduce the risk of liver-related morbidity, by facilitating earlier access to treatment and care. This review investigated the effectiveness of targeted testing interventions on HCV case detection, treatment uptake, and prevention of liver-related morbidity. A literature search identified studies published up to 2013 that compared a targeted HCV testing intervention (targeting individuals or groups at increased risk of HCV) with no targeted intervention, and results were synthesised using meta-analysis. Exposure to a targeted testing intervention, compared to no targeted intervention, was associated with increased cases detected [number of studies (n) = 14; pooled relative risk (RR) 1.7, 95 % CI 1.3, 2.2] and patients commencing therapy (n = 4; RR 3.3, 95 % CI 1.1, 10.0). Practitioner-based interventions increased test uptake and cases detected (n = 12; RR 3.5, 95 % CI 2.5, 4.8; and n = 10; RR 2.2, 95 % CI 1.4, 3.5, respectively), whereas media/information-based interventions were less effective (n = 4; RR 1.5, 95 % CI 0.7, 3.0; and n = 4; RR 1.3, 95 % CI 1.0, 1.6, respectively). This meta-analysis provides for the first time a quantitative assessment of targeted HCV testing interventions, demonstrating that these strategies were effective in diagnosing cases and increasing treatment uptake. Strategies involving practitioner-based interventions yielded the most favourable outcomes. It is recommended that testing should be targeted at and offered to individuals who are part of a population with high HCV prevalence, or who have a history of HCV risk behaviour
Chronic Hypoxia Alters Vasoconstrictive Responses of Femoral Artery in the Fetal Sheep
The purpose of this study was to determine if mild hypoxia alters the responsiveness to vasoactive agents in the renal and the femoral arteries in the fetal sheep. Ten pregnant sheep were operated under halothane anesthesia at 116 to 124 days' gestation. A maternal tracheal catheter was placed for infusing compressed air (control group, n=5) or nitrogen (hypoxia group, n=5) starting on post operative day 6 and maintained for 5 days. Femoral and renal arteries were harvested from the fetus to study the constriction response to phenylephrine (PE 10-9 to 10-5 mol/L). To determine the involvement of nitric oxide as a modulator of vessel constriction, N-nitro-L-arginine methyl ester (L-NAME) was used at a concentration of 10-4 mol/L in parallel chambers. In the hypoxia group, maternal Pao2 significantly decreased from a baseline of 110.4±1.4 to 80.5±1.6 (mmHg, p<0.01), fetal Pao2 significantly decreased from a baseline of 20.9±0.3 to 15.5±0.1 (mmHg, p<0.01). Hypoxia was associated with a significant increase in PE maximal response in the absence (184.5±6.6 vs. 146.2±4.3) and presence (166.9±6.3 vs. 145.0±4.5) of L-NAME, and a decrease in EC50 in the absence (6.0±1.1 vs. 27.0±4.1) of L-NAME of femoral arteries. However, there were no significant differences in PE maximal response and EC50 in the absence and presence of L-NAME of renal arteries. We concluded that mild chronic hypoxia seems to increase the fetal femoral artery response to PE, but not in the fetal renal artery. This observation is consistent with a redistribution of cardiac output away from the carcass
Increased concentration of two different advanced glycation end-products detected by enzyme immunoassays with new monoclonal antibodies in sera of patients with rheumatoid arthritis
<p>Abstract</p> <p>Background</p> <p>Levels of pentosidine (representative of advanced glycation end-products) in sera of patients with rheumatoid arthritis are increased when compared with sera of other diagnoses or healthy controls. These levels have been reported to correlate with clinical indices of rheumatoid arthritis activity and with laboratory markers of inflammation. The purpose of this study was to find out if these findings pertain to other advanced glycation end-products.</p> <p>Methods</p> <p>We have developed two immunoassays based on new monoclonal antibodies to advanced glycation end-products. Antibody 103-E3 reacts with an unidentified antigen, formed in the reaction of proteins with ribose, while antibody 8-C1 responds to N<sup>ε</sup>-(carboxyethyl)lysine. We have used these monoclonal antibodies to measure levels of advanced glycation end-products in sera of patients with rheumatoid arthritis, systemic lupus erythematosus, osteoarthritis, and healthy controls. We calculated the correlations between advanced glycation end-product levels in rheumatoid arthritis sera and the Disease Activity Score 28 (DAS28), age, disease duration, CRP, anti-CCP, rheumatoid factor and treatment with corticosteroids, respectively.</p> <p>Results</p> <p>Levels of both glycation products were significantly higher in sera of patients with rheumatoid arthritis when compared with sera of patients with systemic lupus erythematosus, osteoarthritis, or the healthy controls. Neither the level of N<sup>ε</sup>-(carboxyethyl)lysine nor the level of the 103-E3 antigen in rheumatoid arthritis sera correlated with the DAS28-scored rheumatoid arthritis activity. The levels of both antigens in rheumatoid arthritis sera did not correlate with age, gender, corticosteroid treatment, or levels of CRP, anti-CCP antibodies, and rheumatoid factor in sera.</p> <p>Conclusions</p> <p>We report highly specific increases in the levels of two advanced glycation end-products in sera of patients with rheumatoid arthritis. This increase could be explained neither by rheumatoid arthritis activity nor by inflammation. We propose a working hypothesis that presumes the existence of a link between advanced glycation end-product formation and induction of autoimmunity.</p
Thermal characterization testing of a robust and reliable thermal knife HDRM (Hold Down and Release Mechanism) for CubeSat deployables
Thermal knife HDRMs (Hold Down and Release Mechanisms) are commonly used in CubeSats and other small satellites. However, detailed information on proven designs is difficult to find. Design of a robust and reliable mechanism can present technical challenges which may only become apparent during testing, and often only when tested in a space representative environment. A custom thermal knife HDRM was designed and built for the antenna deployment module of EIRSAT-1 to deploy four coil spring antenna elements, but the same or a similar design could be repurposed quite easily to release a wide range of CubeSat deployables. In this design resistors are used to cut dyneema lines. For robustness and reliability, the thermal response of the mechanism must be well understood. To reach the melting point of the dyneema (150C) the power dissipated in the resistors must often exceed the maximum rated value. Therefore, choosing the operating current and the burn time is a careful trade-off between ensuring that the resistor reliably cuts the dyneema line and ensuring that the resistor, solder joints, PCB and nearby components are not damaged by the high temperatures. These choices are further complicated by the requirement that the mechanism operates over a range of temperatures. A thermal vacuum test campaign was carried out to better understand and characterise the thermal behaviour of the EIRSAT-1 mechanism. For the test a model of the mechanism was built with several temperature sensors installed. Two of these sensors were installed directly on the body of the resistors using a thermally conductive epoxy. Burn tests were performed in vacuum at temperatures between -37C and +56C. The test shows many interesting results including the effect of the dyneema lines on the thermal response, the possibility of desoldering the burn resistors and a comparison between the performance at ambient and vacuum conditions. Finally, a summary is given of the key technical challenges associated with this type of mechanism along with some recommendations to help make future designs more robust and reliable
Update on the status of the Educational Irish Research Satellite (EIRSAT-1)
The Educational Irish Research Satellite, EIRSAT-1, is a 2U CubeSat being implemented by a student-led team at University College Dublin, as part of the 2nd round of the European Space Agency’s Fly Your Satellite! programme. In development since 2017, the mission has several scientific, technological and outreach goals. It will fly an in-house developed antenna deployment module, along with three custom payloads, which are integrated with commercial off-the-shelf subsystems. In preparation for the flight model, a full-system engineering qualification model of the spacecraft has undergone an extensive period of test campaigns, including full functional tests, a mission test, and environmental testing at the European Space Agency’s CubeSat Support Facility in Redu, Belgium. Beyond the technical, educational, and capacity-building goals of the mission, EIRSAT-1 aims to inspire wider study of STEM subjects, while highlighting the importance of multidisciplinary teams and creating greater awareness of space in everyday life. A wide range of outreach activities are being undertaken to realise these aims. This paper provides a status update on key aspects of the EIRSAT-1 project and the next steps towards launc
- …