Lisfranc Injury in the Athlete

Lisfranc injuries refer to a disruption or destabilization of the Lisfranc joint complex or tarsometatarsal joint complex. These injuries are relatively rare; however, clinical signs are subtle with the injury diagnosis frequently missed. A delay in diagnosis can negatively impact the patient’s outcome with sequelae ranging from post-traumatic osteoarthritis to a dysfunctional foot. Therefore, evaluating midfoot injuries requires a high index of suspicion and thorough examination for a tarsometatarsal joint complex injury to allow for maximal return of function and rapid return to sport. The mechanism of Lisfranc injuries in athletes tend to be relatively low-energy which differs from more common higher-energy injuries such as car accidents. Most importantly, identifying and treating Lisfranc injuries requires understanding of the structural anatomy and stability of the midfoot

First metatarsophalangeal hemiarthroplasty for hallux rigidus

There is a paucity of objective information in the literature about first metatarsophalangeal (MTP) hemiarthroplasty. The authors postulate that it is a reasonable treatment option for severe hallux rigidus in selected patients. Twenty-two elective first MTP hemiarthroplasties were performed on 20 patients that met the inclusion criteria. Pre- and postoperative evaluations were done using the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score, visual analogue scale (VAS) pain score, range of motion (ROM) measurements, and radiographs. Average ROM and dorsiflexion improved by 15° and 8°, respectively. VAS pain scores improved from 5 to 2.5 after six weeks. Painless ambulation occurred after six weeks, with maximum improvement by six months. After 24 months, two patients had pain at the surgical site interfering with function, leading to an unsatisfactory result that required conversion to arthrodesis. First MTP hemiarthroplasty for severe hallux rigidus can be considered an alternative to fusion in properly selected patients who wish to maintain a functional range of motion

Gustatory Perception and Fat Body Energy Metabolism Are Jointly Affected by Vitellogenin and Juvenile Hormone in Honey Bees

Honey bees (Apis mellifera) provide a system for studying social and food-related behavior. A caste of workers performs age-related tasks: young bees (nurses) usually feed the brood and other adult bees inside the nest, while older bees (foragers) forage outside for pollen, a protein/lipid source, or nectar, a carbohydrate source. The workers' transition from nursing to foraging and their foraging preferences correlate with differences in gustatory perception, metabolic gene expression, and endocrine physiology including the endocrine factors vitellogenin (Vg) and juvenile hormone (JH). However, the understanding of connections among social behavior, energy metabolism, and endocrine factors is incomplete. We used RNA interference (RNAi) to perturb the gene network of Vg and JH to learn more about these connections through effects on gustation, gene transcripts, and physiology. The RNAi perturbation was achieved by single and double knockdown of the genes ultraspiracle (usp) and vg, which encode a putative JH receptor and Vg, respectively. The double knockdown enhanced gustatory perception and elevated hemolymph glucose, trehalose, and JH. We also observed transcriptional responses in insulin like peptide 1 (ilp1), the adipokinetic hormone receptor (AKHR), and cGMP-dependent protein kinase (PKG, or “foraging gene” Amfor). Our study demonstrates that the Vg–JH regulatory module controls changes in carbohydrate metabolism, but not lipid metabolism, when worker bees shift from nursing to foraging. The module is also placed upstream of ilp1, AKHR, and PKG for the first time. As insulin, adipokinetic hormone (AKH), and PKG pathways influence metabolism and gustation in many animals, we propose that honey bees have conserved pathways in carbohydrate metabolism and conserved connections between energy metabolism and gustatory perception. Thus, perhaps the bee can make general contributions to the understanding of food-related behavior and metabolic disorders

Multidifferential study of identified charged hadron distributions in ZZ-tagged jets in proton-proton collisions at s=\sqrt{s}=13 TeV

Jet fragmentation functions are measured for the first time in proton-proton collisions for charged pions, kaons, and protons within jets recoiling against a $Z$ boson. The charged-hadron distributions are studied longitudinally and transversely to the jet direction for jets with transverse momentum 20 $< p_{\textrm{T}} < 100$ GeV and in the pseudorapidity range $2.5 < \eta < 4$. The data sample was collected with the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 1.64 fb$^{-1}$. Triple differential distributions as a function of the hadron longitudinal momentum fraction, hadron transverse momentum, and jet transverse momentum are also measured for the first time. This helps constrain transverse-momentum-dependent fragmentation functions. Differences in the shapes and magnitudes of the measured distributions for the different hadron species provide insights into the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb public pages

Study of the B−→Λc+Λˉc−K−B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} decay

The decay $B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-}$ is studied in proton-proton collisions at a center-of-mass energy of $\sqrt{s}=13$ TeV using data corresponding to an integrated luminosity of 5 $\mathrm{fb}^{-1}$ collected by the LHCb experiment. In the $\Lambda_{c}^+ K^{-}$ system, the $\Xi_{c}(2930)^{0}$ state observed at the BaBar and Belle experiments is resolved into two narrower states, $\Xi_{c}(2923)^{0}$ and $\Xi_{c}(2939)^{0}$, whose masses and widths are measured to be $$m(\Xi_{c}(2923)^{0}) = 2924.5 \pm 0.4 \pm 1.1 \,\mathrm{MeV}, \\ m(\Xi_{c}(2939)^{0}) = 2938.5 \pm 0.9 \pm 2.3 \,\mathrm{MeV}, \\ \Gamma(\Xi_{c}(2923)^{0}) = \phantom{000}4.8 \pm 0.9 \pm 1.5 \,\mathrm{MeV},\\ \Gamma(\Xi_{c}(2939)^{0}) = \phantom{00}11.0 \pm 1.9 \pm 7.5 \,\mathrm{MeV},$$ where the first uncertainties are statistical and the second systematic. The results are consistent with a previous LHCb measurement using a prompt $\Lambda_{c}^{+} K^{-}$ sample. Evidence of a new $\Xi_{c}(2880)^{0}$ state is found with a local significance of $3.8\,\sigma$, whose mass and width are measured to be $2881.8 \pm 3.1 \pm 8.5\,\mathrm{MeV}$ and $12.4 \pm 5.3 \pm 5.8 \,\mathrm{MeV}$, respectively. In addition, evidence of a new decay mode $\Xi_{c}(2790)^{0} \to \Lambda_{c}^{+} K^{-}$ is found with a significance of $3.7\,\sigma$. The relative branching fraction of $B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-}$ with respect to the $B^{-} \to D^{+} D^{-} K^{-}$ decay is measured to be $2.36 \pm 0.11 \pm 0.22 \pm 0.25$, where the first uncertainty is statistical, the second systematic and the third originates from the branching fractions of charm hadron decays.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-028.html (LHCb public pages

Measurement of the ratios of branching fractions R(D∗)\mathcal{R}(D^{*}) and R(D0)\mathcal{R}(D^{0})

The ratios of branching fractions $\mathcal{R}(D^{*})\equiv\mathcal{B}(\bar{B}\to D^{*}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(\bar{B}\to D^{*}\mu^{-}\bar{\nu}_{\mu})$ and $\mathcal{R}(D^{0})\equiv\mathcal{B}(B^{-}\to D^{0}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(B^{-}\to D^{0}\mu^{-}\bar{\nu}_{\mu})$ are measured, assuming isospin symmetry, using a sample of proton-proton collision data corresponding to 3.0 fb${ }^{-1}$ of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode $\tau^{-}\to\mu^{-}\nu_{\tau}\bar{\nu}_{\mu}$. The measured values are $\mathcal{R}(D^{*})=0.281\pm0.018\pm0.024$ and $\mathcal{R}(D^{0})=0.441\pm0.060\pm0.066$, where the first uncertainty is statistical and the second is systematic. The correlation between these measurements is $\rho=-0.43$. Results are consistent with the current average of these quantities and are at a combined 1.9 standard deviations from the predictions based on lepton flavor universality in the Standard Model.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-039.html (LHCb public pages

3D Printed Titanium Wedges for Distraction Arthrodesis of the Subtalar Joint

Category: Hindfoot Introduction/Purpose: Distraction arthrodesis of the subtalar joint is performed to restore height and correct deformity in the case of subtalar joint arthrosis, malalignment of the rear foot, calcaneal fracture, or other pathologies. Historically, autograft or allograft bone blocks were used to restore natural alignment and improve hindfoot function. Although successful use has been reported, complications associated with donor site morbidity and size limitation for autograft, as well as additional complications including nonunion, graft collapse, and loss of alignment are common. Recently, innovative advancements have enabled the use of 3D printed porous titanium implants for use, improving the union rates and reduced risk of subsidence and graft collapse. Methods: 6 patients with subtalar collapse and anterior ankle impingement were indicated for distraction subtalar arthrodesis. Surgery was performed with a lateral approach for the distraction arthrodesis using an off the shelf 3D printed subtalar wedge and a nitinol pseudoelastic fusion rod for stabilization and fixation. Patients were followed 6 months post op for fusion and alignment. Fusion was confirmed at 3 months with CT scans and alignment was monitored with weightbearing ankle X-rays. Results: 3D wedge incorporation and sustained correction of height and alignment was maintained over time at the subtalar joint. There were no nonunions, 2 patients reports skin healing issues due to tension on the skin with wound closure. These healed with local wound care. Improvement in preoperative to postoperative tibiotalar sagittal plane alignment was observed in all patients. Conclusion: The use of a 3D printed titanium wedge for distraction Arthrodesis of the subtalar joint is a safe procedure and useful procedure in short-term follow-up. This procedure does provide improvement in the patients alignment and fusion occurs with in 3 months of surgery

Lateral Ankle Sprain and Chronic Ankle Instability.

A select 10-30% of patients with recurrent lateral ankle sprains develop chronic ankle instability (CAI). Patients with chronic ankle instability describe a history of the ankle "giving way" with or without pathological laxity on examination. Evaluation includes history, identification of predisposing risk factors for recurrent sprains, and the combination of clinical tests (eg, laxity tests) with imaging to establish the diagnosis. There are a variety of nonoperative strategies to address chronic ankle instability, which include rehabilitation and taping or bracing to prevent future sprains. Patients who fail conservative treatment are candidates for surgery. The anatomic approaches (eg, modified Broström) are preferred to nonanatomic procedures since they recreate the ankle's biomechanics and natural course of the attenuated ligaments. There is a growing interest in minimally invasive procedures via ankle arthroscopy that also address the associated intra-articular disorders. This article provides a review of chronic lateral ankle instability consisting of relevant anatomy, associated disorders, evaluation, treatment methods, and complications.Level of evidenceLevel V, expert opinion

Amphotericin B-impregnated bone cement to treat refractory coccidioidal osteomyelitis.

Use of amphotericin B-impregnated bone cement in combination with systemic antifungals for the treatment of coccidioidal osteomyelitis offers the potential for sustained local concentrations of drug at the site of the infection. Amphotericin B levels in bone of up to 5.1 μg/g have been demonstrated 4 months after placement of bone cement