The design of models for cryogenic wind tunnels

Factors to be considered in the design and fabrication of models for cryogenic wind tunnels include high model loads imposed by the high operating pressures, the mechanical and thermodynamic properties of materials in low temperature environments, and the combination of aerodynamic loads with the thermal environment. Candidate materials are being investigated to establish criteria for cryogenic wind tunnel models and their installation. Data acquired from these tests will be provided to users of the National Transonic Facility

Simulation of subseismic joint and fault networks using a heuristic mechanical model

Flow simulations of fractured and faulted reservoirs require representation of subseismic structures about which subsurface data are limited. We describe a method for simulating fracture growth that is mechanically based but heuristic, allowing for realistic modelling of fracture networks with reasonable run times. The method takes a triangulated meshed surface as input, together with an initial stress field. Fractures initiate and grow based on the stress field, and the growing fractures relieve the stress in the mesh. We show that a wide range of bedding-plane joint networks can be modelled simply by varying the distribution and anisotropy of the initial stress field. The results are in good qualitative agreement with natural joint patterns. We then apply the method to a set of parallel veins and demonstrate how the variations in thickness of the veins can be represented. Lastly, we apply the method to the simulation of normal fault patterns on salt domes. We derive the stress field on the bedding surface using the horizon curvature. The modelled fault network shows both radial and concentric faults. The new method provides an effective means of modelling joint and fault networks that can be imported to the flow simulator

The Viking surface sampler

A surface sampler subsystem for the Viking Lander has been designed, fabricated, cleaned, and successfully tested. Testing has included component level tests to qualification environment and subsystem level tests. This development hardware has also been integrated into a System Test Bed (STB) for the lander system. In addition to the normal dynamic and thermal environments the surface sampler hardware has been tested in an aircraft to simulate the effects of the reduced Martian gravity. Although problems have been encountered with the first-build and integration, the basic design appears to be sound and hardware qualification is scheduled for late 1973

Factors Influencing Producers’ Marketing Decisions in the Louisiana Crawfish Industry

Factors influencing farmer selection of a crawfish marketing outlet were analyzed using 2008 survey data from the Louisiana crawfish industry. Most farmers sell directly to wholesalers. Probit results show farm size, farm income, household income, age, education, and pre-market grading and washing operations significantly affecting farmer selection of an outlet.Crawfish, Marketing Outlet, Premarket Practices, Probit., Marketing, Production Economics,

THE INFLUENCES OF LAND TENANCY AND ROTATION SELECTION ON CRAWFISH FARMERS’ ADOPTION OF BEST MANAGEMENT PRACTICES

This study investigates factors influencing the adoption of best management practices in Louisiana crawfish production. Probit results show acreage, years farming, portion of income from farming, technology adoption tendencies, hunting leases and a stream running through the farm to influence adoption. The most frequently used BMP was irrigation water management.Best Management Practices (BMPs), technology adoption, crawfish, probit, tenancy, crop rotation, Production Economics,

Electro-optic bunch diagnostics on ALICE

An electro-optic longitudinal bunch profile monitor has been implemented on ALICE (Accelerators and Lasers in Combined Experiments) at the Daresbury Laboratories and will be used both to characterise the electron bunch and to provide a testbed for electro-optic techniques. The electro-optic station is located immediately after the bunch compressor, within the FEL cavity; its location allows nearby OTR, beam profile monitors and Coherent Synchrontron Radiation (CSR) diagnostics to be used for calibration and benchmarking. We discuss the implementation and the planned studies on electro-optic diagnostics using this diagnostic station

Upconversion of a relativistic Coulomb field terahertz pulse to the near infrared

We demonstrate the spectral upconversion of a unipolar subpicosecond terahertz (THz) pulse, where the THz pulse is the Coulomb field of a single relativistic electron bunch. The upconversion to the optical allows remotely located detection of long wavelength and nonpropagating components of the THz spectrum, as required for ultrafast electron bunch diagnostics. The upconversion of quasimonochromatic THz radiation has also been demonstrated, allowing the observation of distinct sum- and difference-frequency mixing components in the spectrum. Polarization dependence of first and second order sidebands at ωopt±ωTHz, and ωopt±2ωTHz, respectively, confirms the χ(2) frequency mixing mechanism