13 research outputs found
Zeolitas naturales colombianas de la formaci贸n Combia, municipio de La Pintada: mineralog铆a, caracterizaci贸n y aplicaciones
Zeolitas naturales presentes en rocas andesiticas de la formaci贸n Combia, municipio de la Pintada, departamento de Antioquia, fueron recolectadas. El material recolectado fue sometido a un proceso de caracterizaci贸n mineral贸gica mediante diferentes t茅cnicas a fin de establecer los tipos de fases presentes y el tenor aproximado de las zeolitas; se estableci贸 que la heulandita es la fase zeolitica predominante en las muestras, con concentraci贸n cercana al 9% en peso. Posteriormente un proceso de concentraci贸n, usando l铆quidos densos para la separaci贸n fue realizado; el material obtenido fue caracterizado a fin de conocer las principales propiedades fisicoqu铆micas que permitan establecer posibles aplicaciones del mismo en procesos catal铆ticos de inter茅s para la sociedad actual. La cantidad de hierro presente en el mineral concentrado, propiedades acido/base y redox dejan ver el posible potencial de este material como catalizador/precursor catal铆tico en reacciones de inter茅s como los procesos de oxidaci贸n avanzada de fases org谩nicas (Tipo Fenton Like), reducci贸n de 贸xidos de nitr贸geno (NOx) de gases de combusti贸n y transformaciones en la industria petroqu铆mica. El concentrado de zeolita fue utilizado en su forma natural, intercambiada (H-Zeo y Co-Zeo) o bajo alg煤n tratamiento adicional en las reacciones de reducci贸n catal铆tica selectiva de NO con amoniaco o metano (hasta 98% de conversi贸n a 500掳C) y en la s铆ntesis de compuestos oxigenados a partir de metano y di贸xido de carbono, proceso realizado mediante activaci贸n no convencional, usando plasma de descarga de barrera diel茅ctrica para tal fin. Alcanzando transformaciones del carbono de la fase gas a la fase liquida hasta del 50% (p/p).Abstract: Natural zeolites present in andesitic rocks from the Combia formation, municipality of La Pintada, Antioquia department, were collected. The rocks were characterized by different techniques in order to establish the types of phases present and the approximate amount of zeolites; it was established that heulandite is the predominant phase zeolite in the samples with a concentration value close to 9% in weight. Subsequently a concentration process using dense fluid was performed. The obtained material was characterized in order to know the main physicochemical properties. Those properties would establish the possible applications in relevant catalytic processes of our present society. The amount of iron present in the concentrate, acid / base and redox properties reveal the potential of this material as a catalyst / catalytic precursor in reactions of current interest such as: advanced oxidation processes (AOPs) of organic phases (Fenton type), reduction of nitrogen oxides (NOx) from flue gas and reactions in the petrochemical industry. The concentrate zeolite was used in its natural form, exchanged (H, and Co) or under some additional treatment, in two reactions. Selective catalytic reduction of NO with ammonia or methane (up to 98% conversion at 500 掳 C) and the synthesis of oxygenates from methane and carbon dioxide, a process performed by unconventional activation using non thermal plasma (dielectric barrier discharge) for this purpose. Achieving transformations of carbon from the gas phase to the liquid phase up to 50% (w / w).Doctorad
Comportamiento de las arcillas del 谩rea metropolitana de C煤cuta sometidas a proceso de moldeo por extrusi贸n.
Se presenta el comportamiento de materiales arcillosos ubicados en la zona Metropolitana de San Jos茅 de C煤cuta, cuando son sometidos al proceso de conformado por extrusi贸n. La investigaci贸n se llev贸 a cabo, utilizando muestras extra铆das de las formaciones geol贸gicas Le贸n (municipio C煤cuta) y Guayabo (municipio de El Zulia y Los Patios). Se estudi贸 el efecto de las materias primas (contenido de arena y tama帽o de part铆cula) sobre el proceso de moldeo, determinando el 铆ndice de plasticidad, porcentaje de absorci贸n de agua y la resistencia a la flexi贸n. Las dimensiones de las probetas en verde fueron: largo 4cm, ancho 4 cm y alto 1 cm. El proceso de secado, se llevo a cabo usando estufa de circulaci贸n forzada durante 24 horas a 110 掳C, mientras que la cocci贸n se realiz贸 a trav茅s de horno el茅ctrico a una temperatura m谩xima de聽1000 掳C por 6 horas. Se encontr贸, que el porcentaje de arcilla presente en las muestras de las dos formaciones geol贸gicas es similar (~61%), mientras que la concentraci贸n de arena y limos variaron considerablemente seg煤n la formaci贸n geol贸gica (Guayabo y Le贸n). El 铆ndice de plasticidad (IP) para las muestras, report贸 un valor promedio de 24,5 % para la formaci贸n Guayabo, y 29.5% para la Le贸n.La resistencia a la flexi贸n y el porcentaje de absorci贸n de agua no present贸 variaci贸n significativa. Lo ensayos realizados a las mezclas con variaci贸n de material arenoso permiti贸 establecer que los rangos m谩s adecuados para la formulaci贸n de las pastas cer谩micas usando arcillas del 谩rea Metropolitana de San Jos茅 de C煤cuta, deben estar en: la fracci贸n arenosa entre 20 y 27%, 23 y 28% para la fracci贸n de limos y entre 47 y 58% para la fracci贸n arcillosa; el 铆ndice de plasticidad debe estar cercano al 22%. Las formulaciones establecidas en estos rangos permiten obtener buenas velocidades de extrusi贸n, consumos energ茅ticos adecuados y una buena calidad del producto fabricado.Palabras clave: Plasticidad, compactaci贸n, tama帽o de part铆cula, moldeo, extrusi贸
Mineralogical characterization of zeolites present on basaltic rocks from Combia geological formation, La Pintada (Colombia)
The present study report the presence of natural zeolites, which were found in the andesitic basalts from the Combia geological formation, municipality of La Pintada, Antioquia department (Colombia). The collected samples were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy with detector X-ray energy dispersive (SEM/EDX), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM). The results shown the presence of an associated zeolites heulandite group with predominance of heulandite phase rich in calcium and potassium, with prevalence of platy habit and in a lesser extent the habit coffin type, tabular and block were also evidenced. The presence of chabazite, phillipsite and mordenite, were evidenced as minority zeolites phases. Based on the zeolites properties, the phases founded in Combia formation could be an interest materials for technological applications in areas such agriculture, catalysis or gas separation applications. Especially in Colombia this kind of mineral can be important because much of the current consumption is imported from other territories
Influencia de las materias primas y de la t茅cnica de moldeo en la fabricaci贸n de productos cer谩micos tipo gres
Se emple贸 material arcilloso y caliza proveniente de minas cercanas a la zona metropolitana de C煤cuta, as铆 como el material de rotura despu茅s del proceso de cocci贸n de productos cer谩micos (chamota) para la conformaci贸n de probetas de baldosas cer谩micas mediante las t茅cnicas de extrusi贸n y prensado. Una vez realizado el proceso cer谩mico (con temperaturas de cocci贸n entre 1050掳C y 1250掳C), se evalu贸 el efecto de las diferentes mezclas preparadas sobre las propiedades tecnol贸gicas de resistencia mec谩nica a la flexi贸n, abrasi贸n profunda y porcenta颅je de absorci贸n de agua de acuerdo a la norma t茅cnica colombiana. Los productos cocidos fueron caracterizados mediante difracci贸n de rayos X, fluorescencia de rayos X y microscop铆a electr贸nica de barrido a fin de evidenciar efectos causados por las materias primas y el tipo de moldeo empleado. Los resultados obtenidos dejan ver la existencia de un efecto de la composici贸n mineral贸gica de las muestras y de la t茅cnica de conformado sobre la propiedades tecnol贸gicas analizadas al momento de elaborar cer谩micos gresificados. Se evidenci贸 que para las mezclas de materias primas utilizadas, la t茅cnica de extrusi贸n permite una m谩s r谩pida formaci贸n de fase v铆trea y contribuye a una recristalizaci贸n m谩s r谩pida en altas temperaturas. Los mejores valores para las propiedades tecnol贸gicas analizadas fueron encontrados en la temperatura de 1150掳C.Clay-rich materials and limestone from mines close to the metropolitan area of Cucuta together with materials obtained after firing process of ceramic products (chamotte) were used to form samples of ceramic tiles using extrusion and pressing. Once the ceramic process was finished (with firing temperatures between 1050 掳C and 1250 掳C), the effect of different ceramic pastes on technological characteristics, such as mechanical resistance to flexion, deep abrasion and percentage of water absorption, was evaluated according to the Colombian technical standard. Samples were characterized using X-ray diffraction, X-ray fluorescence and scanning electron microscopy to identify effects caused by presence of raw materials and the type of molding used. The results show that mineralogical composition and forming technique have an impact on the technological properties of the resulting material. Also it can be seen that for mixtures of raw materials employed in the study, the extrusion technique allows faster glassy phase formation, however this molding technique could be one of the reason for faster recrystallization at high temperatures. The best values for the technological properties were found at temperature of 1150 掳C
Technological innovation of the footwear sector companies in Cucuta and its metropolitan area
The objective of this research was to analyze the technological innovation of footwear companies in C煤cuta and its metropolitan area. A sample of 32 companies that are currently working (legal character) was selected. For the analysis of the technological innovation of the footwear sector companies, an information gathering instrument was applied where they were asked about the different organizational aspects, their technological innovation capabilities and innovation processes. In the dimension of innovation capacity, the level of human talent training, the orientation of human talent towards innovation, the financial liquidity for investment of R & D projects and the activities of collaboration and interaction with other organizations were addressed. In the innovation processes, the companies evaluated the development of new products, participation in technological innovation projects in process, participation in projects of technological innovation in product and existence of a Department of R+D+i. In the analysis, it was identified that companies in the footwear sector must strengthen their skills in human talent training and implement a culture of innovation within the organization that allows them to strengthen their innovation
Unburned bodies of mineral carbon coming from Colmena kilns placed in the metropolitan area of San Jos茅 de C煤cuta, Colombia: Possibilities of reuse
In this work residues from the combustion process of the mineral coal used to generate energy in the kilns of the ceramic industry in the metropolitan area of San Jos茅 de C煤cuta were collected and characterized. The material collected was subjected to grain size reduction and characterized by gravimetric thermal analysis, differential scanning calorimetry, scanning electron microscopy, microstructural analysis by X ray diffraction and chemical composition from X-ray fluorescence. The results obtained show that the unburned bodies coming from Colmena kilns (which are currently discarded) still have a very high concentration of organic phase that can provide energy to the ceramic process through combustion, if they are subjected to firing temperatures above 650 掳C. On the other hand, the characterization obtained shows that chemically these unburned bodies are rich in inorganic elements such as silicon, aluminum and calcium, which are present in the material as amorphous (91.9% w/w) and crystalline phase (8.1% w/w), with quartz and mullite as relevant crystalline phases. It was established that this waste can be used as a substitute of clay materials in the manufacture of construction ceramics
Consumption of energy in the manufacturing of ceramic bricks in the metropolitan area of C煤cuta, Colombia
This research determined the consumption of electrical and thermal energy in the manufacturing of ceramic bricks in the metropolitan area of C煤cuta, city located in Colombia, South America. Three bricks manufacturers were selected using extrusion forming technology, artificial drying and tunnel kiln firing in their production system. An inventory of equipment that consumes electrical energy in industrial facilities was made, quantifying the power consumed and relating it to the monthly work hours. In order to estimate the thermal energy demand generated by the coal supplied in the drying and firing stages, we worked under the regime of stationary operation, measuring the mass of coal dosed in the drying and firing cycle, keeping the pressure variables stable and the temperature. We know that by cogeneration, part of the combustion gases of the furnace, are provided as a flow of hot air to the artificial dryer. The demand for electrical energy in the process was 42000kWh/month; while the thermal energy consumption was 998010kWh/month; and the monthly global energy consumption was 1040010kWh. It was concluded that the distribution of consumption was 96% of thermal energy and only 4% is electrical energy; the stages of firing and drying being those of greater energy expenditure