2,981 research outputs found
Micropolar linearly elastic rods
We use Î-convergence to recover the behaviour of solutions of the equilibrium problem for a linearly elastic micropolar ro
Experimental study of vapor-cell magneto-optical traps for efficient trapping of radioactive atoms
We have studied magneto-optical traps (MOTs) for efficient on-line trapping
of radioactive atoms. After discussing a model of the trapping process in a
vapor cell and its efficiency, we present the results of detailed experimental
studies on Rb MOTs. Three spherical cells of different sizes were used. These
cells can be easily replaced, while keeping the rest of the apparatus
unchanged: atomic sources, vacuum conditions, magnetic field gradients, sizes
and power of the laser beams, detection system. By direct comparison, we find
that the trapping efficiency only weakly depends on the MOT cell size. It is
also found that the trapping efficiency of the MOT with the smallest cell,
whose diameter is equal to the diameter of the trapping beams, is about 40%
smaller than the efficiency of larger cells. Furthermore, we also demonstrate
the importance of two factors: a long coated tube at the entrance of the MOT
cell, used instead of a diaphragm; and the passivation with an alkali vapor of
the coating on the cell walls, in order to minimize the losses of trappable
atoms. These results guided us in the construction of an efficient
large-diameter cell, which has been successfully employed for on-line trapping
of Fr isotopes at INFN's national laboratories in Legnaro, Italy.Comment: 9 pages, 7 figures, submitted to Eur. Phys. J.
Phase transformations in electrically conductive ferromagnetic shape-memory alloys, their thermodynamics and analysis
We derive a thermodynamically consistent general continuum-mechanical model describing mutually coupled martensitic and ferro/paramagnetic phase transformations in electrically-conductive magnetostrictive materials such as NiMnGa. We use small-strain and eddy-current approximations, yet large velocities and electric current injected through the boundary are allowed. Fully nonlinear coupling of magneto-mechanical and thermal effects is considered. The existence of energy-preserving weak solutions is proved by showing convergence of time-discrete approximations constructed by a carefully designed semi-implicit regularized scheme. The research that led to the present paper was partially supported by a grant of the group GNFM of INdA
Micropolar linearly elastic rods
We use Î-convergence to recover the behaviour of solutions of the equilibrium problem for a linearly elastic micropolar ro
A variational model for linearly elastic micropolar plate-like bodies
We consider a micropolar, linearly elastic plate-like body, clamped on its boundary and subject to a system of distance loads. We characterize, by means of Î-convergence, the limit behavior of the solutions of the equilibrium problem when the thickness of the body vanishes. We show that, for the special case of isotropic mechanical response, the equilibrium problem described by our Î-limit coincides with a boundary-value problem obtained in a recent deduction of a theory for shearable plates from micropolar elasticity
Preliminary findings from a survey on the MD state of the practice
In the context of an Italian research project, this paper reports on an on-line survey, performed with 155 software professionals, with the aim of investigating about their opinions and experiences in modeling during software development and Model-driven engineering usage. The survey focused also on used modeling languages, processes and tools. A preliminary analysis of the results confirmed that Model-driven engineering, and more in general software modeling, are very relevant phenomena. Approximately 68% of the sample use models during software development. Among then, 44% generate code starting from models and 16% execute them directly. The preferred language for modeling is UML but DSLs are used as wel
Torsion in strain-gradient plasticity: energetic scale effects
Abstract. We study elasto-plastic torsion in a thin wire within the framework of the strain-gradient plasticity theory elaborated by Gurtin and Anand in 2005. The theory in question envisages two material scales: an energetic length-scale, which takes into account the so-called âgeometrically-necessary dislocationsâ through a dependence of the free energy on the Burgers tensor, and a dissipative length-scale. For the rate-independent case with null dissipative length-scale, we construct and characterize a special class of solutions to the evolution problem. With the aid of such characterization, we estimate the dependence on the energetic scale of the ratio between the torque and the twist. Our analysis confirms that the energetic scale is responsible for size-dependent strain-hardening, with thinner wires being stronger. We also detect, and quantify in terms of the energetic length-scale, both a critical twist, after which the wire becomes fully plastified, and two boundary layers near the external boundary of the wire and near the boundary of the plastified region, respectively. The research that led to the present paper was partially supported by a grant of the group GNFM of INdA
Shape programming of a magnetic elastica
We consider a cantilever beam which possesses a possibly non-uniform permanent magnetization, and whose shape is controlled by an applied magnetic field. We model the beam as a plane elastic curve and we suppose that the magnetic field acts upon the beam by means of a distributed couple that pulls the magnetization towards its direction. Given a list of target shapes, we look for a design of the magnetization profile and for a list of controls such that the shapes assumed by the beam when acted upon by the controls are as close as possible to the targets, in an averaged sense. To this effect, we formulate and solve an optimal design and control problem leading to the minimization of a functional which we study by both direct and indirect methods. In particular, we prove that minimizers exist, solve the associated Lagrange-multiplier formulation (besides non-generic cases), and are unique at least for sufficiently low intensities of the controlling magnetic fields. To achieve the latter result, we use two nested fixed-point arguments relying on the Lagrange-multiplier formulation of the problem, a method which also suggests a numerical scheme. Various relevant open question are also discussed
An Elementary Model of Focal Adhesion Detachment and Reattachment During Cell Reorientation Using Ideas from the Kinetics of Wiggly Energies
A simple, transparent, two-dimensional, nonlinear model of cell reorientation is constructed in this paper. The cells are attached to a substrate by âfocal adhesionsâ that transmit the deformation of the substrate to the âstress fibersâ in the cell. When the substrate is subjected to a deformation, say an in-plane bi-axial deformation with stretches λ1 and λ2, the stress fibers deform with it and change their length and orientation. In addition, the focal adhesions can detach from the substrate and reattach to it at new nearby locations, and this process of detachment and reattachment can happen many times. In this scenario the (varying) fiber angle Î in the reference configuration plays the role of an internal variable. In addition to the elastic energy of the stress fibers, the energy associated with the focal adhesions is accounted for by a wiggly energy Ï”acos Î / Ï”, 0 < Ï”âȘ 1. Each local minimum of this energy corresponds to a particular configuration of the focal adhesions. The small amplitude Ï”a indicates that the energy barrier between two neighboring configurations is relatively small, and the small distance 2 ÏÏ” between the local minima indicates that a focal adhesion does not have to move very far before it reattaches. The evolution of this system is studied using a gradient flow kinetic law, which is homogenized for Ï”â 0 using results from weak convergence. The results determine (a) a region of the λ1, λ2-plane in which the (referential) fiber orientation remains stuck at the angle Î and does not evolve, and (b) the evolution of the orientation when the stretches move out of this region as the fibers seek to minimize energy
Coupling a distributed grid based hydrological model and MM5 meteorological model for flooding alert mapping
International audienceThe increased number of extreme rainfall events seems to be one of the common feature of climate change signal all over the world (Easterlin et al., 2000; Meehl et al., 2000). In the last few years a large number of floods caused by extreme meteorological events has been observed over the river basins of Mediterranean area and they mainly affected small basins (few hundreds until few thousands of square kilometres of drainage area) . A strategic goal of applied meteorology is now to try to predict with high spatial resolution the segments of drainage network where floods may occur. A possible way to reach this aim is the coupling of meteorological mesoscale model with high resolution hydrological model. In this work few case studies of observed floods in the Italian Mediterranean area will be presented. It is shown how a distributed hydrological model, using the precipitation fields predicted by MM5 meteorological model, is able to highlight the area where the major floods may occur
- âŠ