2,237 research outputs found
Focusing RF-on demand by logarithmic frequency-diverse arrays
The radiating systems exploiting the frequency diversity of the antennas are powerful architectures, that can have a big impact on wireless power transmission applications, but their characterization is merely theoretical. This paper offers a deep and critical numerical analysis of frequency- diverse arrays and shows the advantages of the family with logarithmic distribution of the frequency for radio-frequency energy focusing goals. For the first time, these systems are analyzed through a Harmonic Balance-based simulation combined with the full-wave description of the array made of eight planar monopoles: the rigorous results confirm the potentialities of these complex radiating systems, in particular show how the time-dependency of the radiating mechanism can be favorably deployed
Energy bursts in fiber bundle models of composite materials
As a model of composite materials, a bundle of many fibers with
stochastically distributed breaking thresholds for the individual fibers is
considered. The bundle is loaded until complete failure to capture the failure
scenario of composite materials under external load. The fibers are assumed to
share the load equally, and to obey Hookean elasticity right up to the breaking
point. We determine the distribution of bursts in which an amount of energy
is released. The energy distribution follows asymptotically a universal power
law , for any statistical distribution of fiber strengths. A similar
power law dependence is found in some experimental acoustic emission studies of
loaded composite materials.Comment: 5 pages, 4 fig
Detecting myocardial salvage after primary PTCA: early myocardial contrast echocardiography versus delayed Sestamibi perfusion imaging.
Perioperative Care Pathways in Low- and Lower-Middle-Income Countries: Systematic Review and Narrative Synthesis
BACKGROUND: Safe and effective care for surgical patients requires high-quality perioperative care. In high-income countries (HICs), care pathways have been shown to be effective in standardizing clinical practice to optimize patient outcomes. Little is known about their use in low- and middle-income countries (LMICs) where perioperative mortality is substantially higher. METHODS: Systematic review and narrative synthesis to identify and describe studies in peer-reviewed journals on the implementation or evaluation of perioperative care pathways in LMICs. Searches were conducted in MEDLINE, EMBASE, CINAHL Plus, WHO Global Index, Web of Science, Scopus, Global Health and SciELO alongside citation searching. Descriptive statistics, taxonomy classifications and framework analyses were used to summarize the setting, outcome measures, implementation strategies, and facilitators and barriers to implementation. RESULTS: Twenty-seven studies were included. The majority of pathways were set in tertiary hospitals in lower-middle-income countries and were focused on elective surgery. Only six studies were assessed as high quality. Most pathways were adapted from international guidance and had been implemented in a single hospital. The most commonly reported barriers to implementation were cost of interventions and lack of available resources. CONCLUSIONS: Studies from a geographically diverse set of low and lower-middle-income countries demonstrate increasing use of perioperative pathways adapted to resource-poor settings, though there is sparsity of literature from low-income countries, first-level hospitals and emergency surgery. As in HICs, addressing patient and clinician beliefs is a major challenge in improving care. Context-relevant and patient-centered research, including qualitative and implementation studies, would make a valuable contribution to existing knowledge. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s00268-022-06621-x
Acoustic Emission from crumpling paper
From magnetic systems to the crust of the earth, many physical systems that
exibit a multiplicty of metastable states emit pulses with a broad power law
distribution in energy. Digital audio recordings reveal that paper being
crumpled, a system that can be easily held in hand, is such a system. Crumpling
paper both using the traditional hand method and a novel cylindrical geometry
uncovered a power law distribution of pulse energies spanning at least two
decades: (exponent 1.3 - 1.6) Crumpling initally flat sheets into a compact
ball (strong crumpling), we found little or no evidence that the energy
distribution varied systematically over time or the size of the sheet. When we
applied repetitive small deformations (weak crumpling) to sheets which had been
previously folded along a regular grid, we found no systematic dependence on
the grid spacing. Our results suggest that the pulse energy depends only weakly
on the size of the paper regions responsible for sound production.Comment: 12 pages of text, 9 figures, submitted to Phys. Rev. E, additional
information availible at http://www.msc.cornell.edu/~houle/crumpling
Failure Processes in Elastic Fiber Bundles
The fiber bundle model describes a collection of elastic fibers under load.
the fibers fail successively and for each failure, the load distribution among
the surviving fibers change. Even though very simple, the model captures the
essentials of failure processes in a large number of materials and settings. We
present here a review of fiber bundle model with different load redistribution
mechanism from the point of view of statistics and statistical physics rather
than materials science, with a focus on concepts such as criticality,
universality and fluctuations. We discuss the fiber bundle model as a tool for
understanding phenomena such as creep, and fatigue, how it is used to describe
the behavior of fiber reinforced composites as well as modelling e.g. network
failure, traffic jams and earthquake dynamics.Comment: This article has been Editorially approved for publication in Reviews
of Modern Physic
Assessment of digital image correlation measurement errors: methodology and results
Optical full-field measurement methods such as Digital Image Correlation (DIC) are increasingly used in the field of experimental mechanics, but they still suffer from a lack of information about their metrological performances. To assess the performance of DIC techniques and give some practical rules for users, a collaborative work has been carried out by the Workgroup “Metrology” of the French CNRS research network 2519 “MCIMS (Mesures de Champs et Identification en Mécanique des Solides / Full-field measurement and identification in solid mechanics, http://www.ifma.fr/lami/gdr2519)”. A methodology is proposed to assess the metrological performances of the image processing algorithms that constitute their main component, the knowledge of which being required for a global assessment of the whole measurement system. The study is based on displacement error assessment from synthetic speckle images. Series of synthetic reference and deformed images with random patterns have been generated, assuming a sinusoidal displacement field with various frequencies and amplitudes. Displacements are evaluated by several DIC packages based on various formulations and used in the French community. Evaluated displacements are compared with the exact imposed values and errors are statistically analyzed. Results show general trends rather independent of the implementations but strongly correlated with the assumptions of the underlying algorithms. Various error regimes are identified, for which the dependence of the uncertainty with the parameters of the algorithms, such as subset size, gray level interpolation or shape functions, is discussed
Power-based Model for Temperature Prediction in FSW
Abstract This paper describes a thermal numerical model accessible to all users for predicting temperature in friction stir welding from the power, material thermal properties, process parameters, tool, and plate dimensions. Starting with the information obtained from the machine, power or torque, the heat flux is modeled as a circular moving source with a diameter equal to that of the shoulder. The model calibrated in a specific setup (CNC machine) successfully predicted without recalibration the weld temperature field in another one (robot). The simple thermal model was applied without recalibration to data available in the literature to test its effectiveness. The results obtained with this model are promising, although more tests are needed to cover all possible varieties of tool geometries and material thickness. If extended over a broader range of configurations (i.e., process parameters and tool-workpiece geometries), it could be a handy tool for all FSW users. The tool may help study the thermal cycles in the heat affected zone that influence final mechanical properties and make it easier to identify optimal parameters if the desired optimal peak temperatures are determined.Advanced THermomechanical mOdelling of Refractory lining
Deactivation of ultrashallow boron implants in preamorphized silicon after nonmelt laser annealing with multiple scans
- …