542 research outputs found
An overview of mechanisms of desiccation tolerance in selected angiosperm resurrection plants
The vegetative tissues of resurrection plants, like seeds, can tolerate desiccation to 5% relative water content (RWC) for extended periods and yet resume full metabolic activity on re-watering. In this review we will illustrate how this is achieved in a variety of angiosperm resurrection plants, our studies ranging from the ecophysiological to the biochemical level. At the whole plant level, leaf folding and other anatomical changes serve to minimise light and mechanical stress associated with drying and rehydration. The mechanisms of cell wall folding are described for Craterostigma wilmsii and Myrothanmus flabellifolia. Free radicals, radical oxygen species (ROS) usually generated under water-deficit stress by photosynthesis, are minimised by either homoiochlorophylly (e.g. C. wilmsii and M. flabellifolia) or poikilochlorophylly (e.g. Xerophyta sp.). The antioxidant systems of these plants effectively deal with ROS generated by other metabolic processes. In addition to antioxidants common to most plants, resurrection plants also accumulate polyphenols such as 3, 4, 5 tri-O-galloylquinic acid in M. flabellifolia, and seed-associated antioxidants (e.g. 1-cys-peroxiredoxin and metallothionines) as effective ROS scavengers. Sucrose accumulates at low RWC, presumably protecting the sub-cellular milieu against desiccation-induced macromolecular denaturation
Experimental observation of high field diamagnetic fluctuations in Niobium
We have performed a magnetic study of a bulk metallic sample of Nb with
critical temperature K. Magnetization versus temperature (M {\it
vs} T) data obtained for fixed magnetic fields above 1 kOe show a
superconducting transition which becomes broader as the field is increased. The
data are interpreted in terms of the diamagnetic lowest Landau level (LLL)
fluctuation theory. The scaling analysis gives values of the superconducting
transition temperature consistent with % . We search for
universal 3D LLL behavior by comparing scaling results for Nb and YBaCuO, but
obtain no evidence for universality.Comment: 5 pages, 6 figures, Accepted for publication in Phys.Rev.
Scaling in high-temperature superconductors
A Hartree approximation is used to study the interplay of two kinds of
scaling which arise in high-temperature superconductors, namely critical-point
scaling and that due to the confinement of electron pairs to their lowest
Landau level in the presence of an applied magnetic field. In the neighbourhood
of the zero-field critical point, thermodynamic functions scale with the
scaling variable , which differs from the variable
suggested by the gaussian approximation.
Lowest-Landau-level (LLL) scaling occurs in a region of high field surrounding
the upper critical field line but not in the vicinity of the zero-field
transition. For YBaCuO in particular, a field of at least 10 T is needed to
observe LLL scaling. These results are consistent with a range of recent
experimental measurements of the magnetization, transport properties and,
especially, the specific heat of high- materials.Comment: 22 pages + 1 figure appended as postscript fil
Transient developmental imbalance of cortical interneuron subtypes presages long-term changes in behavior
Cortical GABAergic interneurons are generated in large numbers in the ganglionic eminences and migrate into the cerebral cortex during embryogenesis. At early postnatal stages, during neuronal circuit maturation, autonomous and activity-dependent mechanisms operate within the cortex to adjust cell numbers by eliminating naturally occurring neuron excess. Here, we show that when cortical interneurons are generated in aberrantly high numbers—due to a defect in precursor cell proliferation during embryogenesis—extra parvalbumin interneurons persist in the postnatal mouse cortex during critical periods of cortical network maturation. Even though cell numbers are subsequently normalized, behavioral abnormalities remain in adulthood. This suggests that timely clearance of excess cortical interneurons is critical for correct functional maturation of circuits that drive adult behavior
Testing the GRACE follow-on triple mirror assembly
We report on the successful testing of the GRACE follow-on triple mirror assembly (TMA) prototype. This component serves to route the laser beam in a proposed follow-on mission to the Gravity Recovery and Climate Explorer (GRACE) mission, containing an optical instrument for space-based distance measurement between satellites. As part of this, the TMA has to meet a set of stringent requirements on both the optical and mechanical properties. The purpose of the TMA prototype testing is to establish the feasibility of the design, materials choice and fabrication techniques. Here we report on co-alignment testing of this device to the arc second (5 μrad) level and thermal alignment stability testing to 1 μ rad {{K}-1}
Fluctuation Study of the Specific Heat of MgB2
The specific heat of polycrystalline MgB has been measured with
high resolution ac calorimetry from 5 to 45 K at constant magnetic fields. The
excess specific heat above T is discussed in terms of Gaussian
fluctuations and suggests that MgB is a bulk superconductor with
Ginzburg-Landau coherence length \AA . The transition-width
broadening in field is treated in terms of lowest-Landau-level (LLL)
fluctuations. That analysis requires that \AA . The underestimate
of the coherence length in field, along with deviations from 3D LLL
predictions, suggest that there is an influence from the anisotropy of B
between the c-axis and the a-b plane.Comment: Phys. Rev. B 66, 134515 (2002
Recommended from our members
Determining the Bearing Capacity of Permanently Shadowed Regions of the Moon using Boulder Tracks
Recommended from our members
Analysis of Lunar Boulder Tracks: Implications for Trafficability of Pyroclastic Deposits
In a new era of lunar exploration, pyroclastic deposits have been identified as valuable targets for resource utilization and scientific inquiry. Little is understood about the geomechanical properties and the trafficability of the surface material in these areas, which is essential for successful mission planning and execution. Past incidents with rovers highlight the importance of reliable information about surface properties for future, particularly robotic, lunar mission concepts. Characteristics of 149 boulder tracks are measured in Lunar Reconnaissance Orbiter Narrow Angle Camera images and used to derive the bearing capacity of pyroclastic deposits and, for comparison, mare and highland regions from the surface down to ~5‐m depth, as a measure of trafficability. Results are compared and complemented with bearing capacity values calculated from physical property data collected in situ during Apollo, Surveyor, and Lunokhod missions. Qualitative observations of tracks show no region‐dependent differences, further suggesting similar geomechanical properties in the regions. Generally, bearing capacity increases with depth and decreases with higher slope gradients, independent of the type of region. At depths of 0.19 to 5 m, pyroclastic materials have bearing capacities equal or higher than those of mare and highland material and, thus, may be equally trafficable at surface level. Calculated bearing capacities based on orbital observations are consistent with values derived using in situ data. Bearing capacity values are used to estimate wheel sinkage of rover concepts in pyroclastic deposits. This study's findings can be used in the context of traverse planning, rover design, and in situ extraction of lunar resources
Recommended from our members
Determining Trafficability of Pyroclastic Deposits and Permanently Shaded Regions of the Moon Using Boulder Tracks
Using Boulder Tracks as a Tool to Understand the Bearing Capacity of Permanently Shadowed Regions of the Moon
Permanently shadowed regions (PSRs) are abundant at the lunar poles. They experience no direct sunlight and reach temperatures as low as 30 K. PSRs are of interest as evidence suggests that some may contain water ice (H2O/OH‐), which could provide a record of the evolution of volatiles in the inner solar system. This water ice is also a critical resource for life‐support systems and rocket propellant. A better understanding of mechanical properties of PSR regolith, such as its bearing capacity, will help optimize the design of future exploration rovers and landers. Thirteen boulder tracks were identified on the edge of, or inside, south polar lunar PSR enhanced imagery and used to estimate the strength of the PSR regolith at latitudes of 70° to 76° in sites with maximum annual temperatures of 65 to 210 K. PSR boulder track features are similar to those observed in highland, mare, and pyroclastic regions of the Moon, implying similar properties of the regolith. Measured features were used to estimate bearing capacity for PSR regolith at depths of ~0.28 to 4.68 m. Estimated bearing capacity values suggest that these PSRs may be somewhat stronger than highland and mare regions at depths of 0.28 to 1.00 m. Bearing capacity in these PSRs is statistically the same as those in other regions of the Moon at depths of 1.00 to 2.00 m. The results of this study can be used to infer bearing capacity as one measure for the trafficability of lower‐latitude PSRs of the type measured here
- …