5,065 research outputs found
A semiparametric bivariate probit model for joint modeling of outcomes in STEMI patients
In this work we analyse the relationship among in-hospital mortality and a treatment effectiveness outcome in patients affected by ST-Elevation myocardial infarction. The main idea is to carry out a joint modeling of the two outcomes applying a Semiparametric Bivariate Probit Model to data arising from a clinical registry called STEMI Archive. A realistic quantification of the relationship between outcomes can be problematic for several reasons. First, latent factors associated with hospitals organization can affect the treatment efficacy and/or interact with patient’s condition at admission time. Moreover, they can also directly influence the mortality outcome. Such factors can be hardly measurable. Thus, the use of classical estimation methods will clearly result in inconsistent or biased parameter estimates. Secondly, covariate-outcomes relationships can exhibit nonlinear patterns. Provided that proper statistical methods for model fitting in such framework are available, it is possible to employ a simultaneous estimation approach to account for unobservable confounders. Such a framework can also provide flexible covariate structures and model the whole conditional distribution of the response
Assessing the volcanic hazard for Rome. 40Ar/39Ar and In-SAR constraints on the most recent eruptive activity and present-day uplift at Colli Albani Volcanic District
We present new 40Ar/39Ar data which allow us to refine the recurrence time for the most recent eruptive activity occurred at Colli Albani Volcanic District (CAVD) and constrain its geographic area. Time elapsed since the last eruption (36 kyr) overruns the recurrence time (31 kyr) in the last 100 kyr. New interferometric synthetic aperture radar data, covering the years 1993–2010, reveal ongoing inflation with maximum uplift rates (>2 mm/yr) in the area hosting the most recent (<200 ka) vents, suggesting that the observed uplift might be caused by magma injection within the youngest plumbing system. Finally, we frame the present deformation within the structural pattern of the area of Rome, characterized by 50 m of regional uplift since 200 ka and by geologic evidence for a recent (<2000 years) switch of the local stress-field, highlighting that the precursors of a new phase of volcanic activity are likely occurring at the CAVD
Analysis of the seismic site effects along the ancient Via Laurentina (Rome)
This paper presents an evaluation of the Local Seismic Response (LSR)
along the route of the ancient Roman road Via Laurentina, which has
been exposed in several areas of southwest Rome over the last decade
during the construction of new buildings and infrastructures. It is
an example of LSR analysis applied to ancient and archaeological
sites located in alluvial valleys with some methodological inferences
for the design of infrastructure and urban planning. Since the ancient
road does not cross the alluvial valley (namely the Fosso di Vallerano
Valley) normal to its sides, it was not possible to directly perform
2D numerical modelling to evaluate the LSR along the road route.
Therefore, outputs of 2D numerical models, obtained along three cross
sections that were normal oriented respect to the valley, were projected
along the route of the Via Laurentina within a reliable buffer attributed
according to an available high-resolution geological model of the
local subsoil. The modelled amplification functions consider physical
effects due to both the 2D shape of the valley and the heterogeneities
of the alluvial deposits. The 1D and 2D amplification functions were
compared to output that non-negligible effects are related to the narrow
shape of the fluvial valley and the lateral contacts between the
lithotecnical units composing the alluvial fill. The here experienced
methodology is suitable for applications to the numerical modelling of
seismic response in case of linear infrastructures (i.e., roads, bridges,
railways) that do not cross the natural system along physically characteristic
directions (i.e. longitudinally or transversally)
Mechanical behaviour with temperatures of aluminum matrix composites with CNTs
Aluminum is a very useful structural metal employed in different industrial sectors, in particular it is used in
large quantities in automotive, aeronautic and nautical industries. The main reasons of its wide use are: a very
good oxidation resistance, excellent ductility, low melting temperature (660 °C) and low density (2.71 g/cm3).
However, in order to reduce the emissions and fuel consumption is necessary to reduce the overall weight of
vehicles by increasing mechanical properties of the structural material. The improvement of mechanical
properties is normally achieved through use of reinforcement in materials, used like matrix, in order to improve
some specific characteristics.
In this work composites of carbon nanotubes (CNTs) dispersed in aluminum were made. The most difficulties
in the preparation of this type of composite are represented by the low wettability between metallic matrix and
fillers and the possibility of the oxidation of metal during melting with consequent decreasing of mechanical
proprieties. The composite was obtained by three consecutive step: the first one is the functionalization of
fillers surface to improve the fillers dispersion, the second one is the dispersion of fillers in the matrix by
powder mixing and the third one is the melting and casting of the mix prepared.
In particular, fillers used are multi walled carbon nanotubes (MWCNTs) with functionalized surface by
treatment with a solfonitric solution. Melting and casting are carried out with the aid of an induction furnace
with a controlled atmosphere system and centrifugal casting. Argon is the inert gas used to prevent the
oxidation of aluminium during fusion. Young’s modulus was evaluated at different temperature and correlated
with the different CNTs percentage. The dispersion rate of fillers and the microstructure of the sample were
evaluated by FESEM micrograph
Negation of Factors Upon Which Defendant-Psychiatrist\u27s Judgment Was Premised Is Necessary to Establish Prima Facie Case of Medical Malpractice
Negation of Factors Upon Which Defendant-Psychiatrist\u27s Judgment Was Premised Is Necessary to Establish Prima Facie Case of Medical Malpractice
Toward the valorization of olive (Olea europaea var. europaea L.) biodiversity: horticultural performance of seven Sicilian cultivars in a hedgerow planting system
An intense survey of the Sicilian's olive growing areas for autochthonous germplasm, mainly represented by centennials olive trees (Olea europaea var. europaea L.) apparently older then III centuries, started at the beginning of the 1980s and resulted in the selection of more than 150 cultivars and accessions. This germplasm was propagated in a nursery, by grafting onto seedlings of Olea europaea L., and planted in an experimental orchard, in an olive district located in the South-west of the Island, where they were evaluated for over 30 years and selected for their early bearing, high and constant productivity, as well as high oil content of the fruits and excellent chemical (oleic acid and phenol content) and organoleptic profile of the oil. This paper reports data on the horticultural performances (production, vigor, crop efficiency and oil quality) of four cultivars (\u2018Kalat\u2019, \u2018Olivo di Mandanici\u2019, \u2018Abunara\u2019 and \u2018Minuta\u2019), selected within the Sicilian's autochthonous germplasm trained as 'Free Palmetta' and tested in a hedgerow planting system at three different planting densities: 500, 666 and 1000 trees ha-1. The cultivar \u2018Nocellara del Belice\u2019, \u2018Cerasuola, and \u2018Biancolilla\u2019, widely cultivated in the area where the trial was carried out, were used as references. The outstanding performance of the cultivar \u2018Kalat\u2019 at planting density of 1000 trees ha 121, suggests that this cultivar can be a promising choice for the super high density orchards (SHD). The other cultivars tested did not performed as \u2018Kalat\u2019 and seem not suitable for SHD planting system due to their high vigor. The hedgerow planting system tested, in the first 6 years of planting, increaseed productivity of all cultivars compared to traditional olive orchard typical of the area where the trial was conducted. This hedgerow olive orchard may represent a valid solution to increase orchard productivity and to reduce harvest costs by mechanization, depending on tree high, with straddle or side by side canopy contact machines. Achieve higher yield and reducing management costs using autochthonous, resilient cultivars, could be a new strategy to counteract climate changes. The unique organoleptic profiles of the oils obtained from the cultivars tested, could improve the offer of tasty, flavored and nutraceutical extra virgin olive oils in the international markets. Results highlight the importance of preserving and valorizing biodiversity to increase productivity and resiliency of agricultural systems, facing continuous, fast and deep social and environmental changes
Fields of Contention : Philology <\u27\u27Bunkengaku\u27\u27> and the Philosophy of Literature <\u27\u27Bungeigaku\u27\u27>
Historiography and Japanese Consciousness of Values and Norms, カリフォルニア大学 サンタ・バーバラ校, カリフォルニア大学 ロサンゼルス校, 2001年1
Electromagnetic wave absorption and structural properties of wide-band absorber made of graphene-printed glass-fibre composite
Lightweight composites combining electromagnetic wave absorption and excellent mechanical properties are required in spacecraft and aircraft. A one- dimensional metamaterial absorber consisting of a stack of glass fibre/epoxy layers and graphene nanoplatelets/epoxy films was proposed and fabricated through a facile air-spraying based printing technology and a liquid resin infusion method. The production process allows an optimum dispersion of graphene nanoplatelets, promoting adhesion and mechanical integration of the glass fibre/epoxy layers with the graphene nanoplatelets/epoxy films. According to experimental results, the proposed wide-band absorber provides a reflection coefficient lower than −10 dB in the range 8.5–16.7 GHz and an improvement of flexural modulus of more than 15%, with a total thickness of ∼1 mm. Outstanding electromagnetic wave absorption and mechanical performance make the proposed absorber more competitive in aeronautical and aerospace applications
- …