Ridge segmentation, tectonic evolution and rheology of slow-spreading oceanic crust

Submitted in the partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and the Woods Hole Oceanographic Institution August, 1996Two-thirds of the Earth's surface is oceanic crust formed by magmatic and tectonic processes along mid-ocean ridges. Slow-spreading ridges, such as the Mid-Atlantic Ridge, are discontinuous and composed of ridge segments. Segments are thus fundamental units of magmatic accretion and tectonic deformation that control the evolution of the crust. The objective of this Thesis is to constrain the tectonic processes that occur at the scale of slowspreading segments, to identify the factors controlling segment propagation, and to provide constraints on lithospheric strength with laboratory deformation experiments. In chapter 2, bathymetry and gravity from various areas along the global mid-ocean ridge system are analyzed to quantify systematic variations at the scale of individual segments. There is a marked asymmetry in bathymetry and gravity in the vicinity of segment offsets. We develop a model of faulting to explain these observations. Low-angle faults appear to accommodate tectonic extension at the inside corners of ridge-offset intersections, and result in substantially uplifted terrain with thin crust with respect to that at the outside corners or centers of segments. Results from Chapter 3 indicate that the crust magmatically emplaced on axis is not maintained off-axis. This transition is revealed by both statistical and spectral analyses of bathymetry and gravity. Tectonic extension varies along the length of a segment, resulting in thinning and uplift of the crust at ridge-offset inside corners, and a decorrelation between bathymetry and gravity patterns. Tectonic deformation substantially reshapes the oceanic crust that is magmatically emplaced on-axis, and strongly controls the crustal structure and seafloor morphology off-axis. Satellite gravity data over the Atlantic shown in Chapter 4 reveal a complex history of ridge segmentation, and provides constraints on the processes driving the propagation of segments. The pattern of segmentation is controlled mainly by the geometry of the ridge axis, and secondarily by hot spots. Segments migrate primarily down regional gradients associated with hot spot swells. However, the lack of correlation between gradients and propagation rate, and the propagation up gradient of some offsets, suggest that additional factors control propagation (e.g., variations in lithospheric strength). Most non-transform offsets are short-lived and migrating, while transform offsets are long-lived and stable. Both the propagation of segments (Chapter 4) tectonism along a segment (Chapters 2 and 3) are controlled by the lithospheric rheology. In Chapter 5 I present results from laboratory deformation experiments on serpentinite. These experiments demonstrate that serpentinites are considerably weaker than peridotites or gabbros, display a non-dilatant style of brittle deformation, and strain is accommodated by shear cracking. Serpentinites may weaken the lithosphere, enhance strain localization along faults, and control the style of faulting.A fellowship from Caixa de Pensions "La Caixa" in Barcelona provided me with all the required financial support to come to WHOI. The work presented in this thesis was also supported by the National Science Foundation grants OCE-90l2576, OCE-930078, OCE-9313812, and Office of Naval Research grant N00014-9l-J-1433

A record of eruption and intrusion at a fast spreading ridge axis : axial summit trough of the East Pacific Rise at 9–10°N

Author Posting. © American Geophysical Union, 2009. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 10 (2009): Q10T07, doi:10.1029/2008GC002354.High-resolution side-scan sonar, near-bottom multibeam bathymetry, and deep-sea photo and bathymetry traverses are used to map the axial summit trough (AST) at the East Pacific Rise between 9 and 10°N. We define three ridge axis morphologic types: no AST, narrow AST, and wide AST, which characterize distinct ridge crest domains spanning tens of kilometers along strike. Near-bottom observations, modeling of deformation above intruding dikes, and comparisons to the geologic and geophysical structure of the ridge crest are used to develop a revised model of AST genesis and evolution. This model helps constrain the record of intrusive and extrusive magmatism and styles of lava deposition along the ridge crest at time scales from hundreds to tens of thousands of years. The grabens in the narrow-AST domain (9°43′–53′N) are consistent with deformation above the most recent (<10) diking events beneath the ridge crest. Frequent high–effusion rate extrusive volcanism in this domain (several eruptions every ∼100 years) overprints near-axis deformation and maintains a consistent AST width. The most recent eruption at the ridge crest occurred in this area and did not significantly modify the physical characteristics of the AST. The grabens in the wide-AST domain (9°23′–43′N) originated with similar dimensions to the narrow AST. Spreading, driven primarily by the intrusion of shallow dikes within a narrow axial zone, causes the initial graben bounding faults to migrate away from the axis. Infrequent extrusive volcanism (several eruptions every ∼1000 years) fills a portion of the subsidence that accumulates over time but does not significantly modify the width of the AST. Outside of these domains, lower–effusion rate constructional volcanism without efficient drain-back fills and erases the signature of the AST. The relative frequency of intrusive versus extrusive magmatic events controls the morphology of the ridge crest and appears to remain constant over millennial time scales within the domains we have identified; however, over longer time scales (∼10–25 ka), domain-specific intrusive-to-extrusive ratios do not appear to be fixed in space, resulting in a fairly consistent volcanic accretion over the length scale of the second-order ridge segment between 9°N and 10°N.This work was supported by NSF grants OCE-0525863 to D. Fornari and S. A. Soule; OCE-0732366 to S. A. Soule; and OCE-9819261 to H. Schouten, M. Tivey, and D. Fornari and by CNRS to J. Escartın

Tectonic evolution of 200 km of Mid-Atlantic Ridge over 10 million years : interplay of volcanism and faulting

Author Posting. © American Geophysical Union, 2015. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry, Geophysics, Geosystems 16 (2015): 2303-2321, doi:10.1002/2015GC005797.We reconstruct the history of the mode of accretion of an area of the Mid-Atlantic Ridge south of the Kane fracture zone using bathymetric morphology. The area includes 200 km of the spreading axis and reaches to 10 Ma on either side. We distinguish three tectonic styles: (1) volcanic construction with eruption and intrusion of magma coupled with minor faulting, (2) extended terrain with abundant large-offset faults, (3) detachment faulting marked by extension on single long-lived faults. Over 40% of the seafloor is made of extended terrain and detachment faults. The area includes products of seven spreading segments. The spreading axis has had detachment faulting or extended terrain on one or both sides for 70% of the last 10 Ma. In some parts of the area, regions of detachment faulting and extended terrain lie close to segment boundaries. Regions of detachment faulting initiated at 10 Ma close to the adjacent fracture zones to the north and south, and then expanded away from them. We discuss the complex evidence from gravity, seismic surveys, and bathymetry for the role of magma supply in generating tectonic style. Overall, we conclude that input of magma at the spreading axis has a general control on the development of detachment faulting, but the relationship is not strong. Other factors may include a positive feedback that stabilizes detachment faulting at the expense of volcanic extension, perhaps through the lubrication of active detachment faults by the formation of low friction materials (talc, serpentine) on detachment fault surfaces.2016-01-2

Active long-lived faults emerging along slow-spreading mid-ocean ridges

Author Posting. © The Oceanography Society, 2012. This article is posted here by permission of The Oceanography Society for personal use, not for redistribution. The definitive version was published in Oceanography 25, no. 1 (2012): 94–99, doi:10.5670/oceanog.2012.07.In the classic mid-ocean ridge model, new seafloor is generated through a combination of magmatic diking feeding lava flows at the spreading axis, and the formation of short-offset, high-angle normal faults that dip toward the axis. These processes lead to the formation of a layered magmatic crust and linear, ridge-parallel abyssal hills on both ridge flanks. This model of ocean crust generation applies well to fast-spreading mid-ocean ridges (i.e., > 80 mm yr–1), but it is not always valid at slower-spreading ridges. Instead, at slow-spreading ridges such as the Mid-Atlantic Ridge (MAR), which is opening at about 25 mm yr–1, the formation of long-lived faults (called detachments) on one flank of the ridge axis is an important process in seafloor formation (Cann et al., 1997; Karson, 1999; MacLeod et al., 2009; Schroeder et al., 2007; Smith et al., 2008; Tucholke et al., 1998). In fact, active detachment faults have been identified along nearly half of the MAR axis between 12° and 35°N (Escartín et al., 2008).This study was undertaken with US National Science Foundation (NSF) support to HS and DKS, and Centre National de la Recherche Scientifique support to JE

Rare gas systematics on Lucky Strike basalts (37°N, North Atlantic): Evidence for efficient homogenization in a long-lived magma chamber system?

International audienceWe present rare gas data in fresh glasses from the Lucky Strike segment located on the Mid Atlantic Ridge (∼37.3°N), close to the Azores plateau. We analyzed the helium and neon isotopes in 28 samples by melting as well as He‐Ne‐Ar‐Kr‐Xe isotopes in 9 samples by crushing. Samples were collected during the Graviluck06, MOMAR08, and Bathyluck09 cruises over a ridge length of ∼13 km (mean sample spacing of ∼500 m), and at depths ranging from 1550 m to 2174 m. The helium isotopic ratio varies between 84,410 and 88,235 (R/Ra between 8.19 and 8.56). The samples having the “most” primitive helium isotopic ratio are the enriched samples (e.g. high K2O/TiO2) although the difference to the depleted samples is small. It appears that all of our samples derive from the same and well‐homogenized magma chamber. Neon isotopes clearly show the influence of the Azores hotspot, which is not seen with helium because of lower 3He/22Ne in the plume source compared to the MORB source

Magmatic and tectonic extension at the Chile Ridge: Evidence for mantle controls on ridge segmentation

We use data from an extensive multibeam bathymetry survey of the Chile Ridge to study tectonomagmatic processes at the ridge axis. Specifically, we investigate how abyssal hills evolve from axial faults, how variations in magmatic extension influence morphology and faulting along the spreading axis, and how these variations correlate with ridge segmentation. The bathymetry data are used to estimate the fraction of plate separation accommodated by normal faulting, and the remaining fraction of extension, M, is attributed primarily to magmatic accretion. Results show that M ranges from 0.85 to 0.96, systematically increasing from first-order and second-order ridge segment offsets toward segment centers as the depth of ridge axis shoals relative to the flanking highs of the axial valley. Fault spacing, however, does not correlate with ridge geometry, morphology, or M along the Chile Ridge, which suggests the observed increase in tectonic strain toward segment ends is achieved through increased slip on approximately equally spaced faults. Variations in M along the segments follow variations in petrologic indicators of mantle melt fraction, both showing a preferred length scale of 50620 km that persists even along much longer ridge segments. In comparison, mean M and axial relief fail to show significant correlations with distance offsetting the segments. These two findings suggest a form of magmatic segmentation that is partially decoupled from the geometry of the plate boundary. We hypothesize this magmatic segmentation arises from cells of buoyantly upwelling mantle that influence tectonic segmentation from the mantle, up

Optical quantum random number generators: a comparative study

Quantum random number generators give the opportunity to, in theory, obtain completely unpredictable numbers only perturbed by the noise in the measurement. The obtained data can be digitalized and processed so that it gives as a result a uniform sequence of binary random numbers without any relation with the classical noise in the system. In this work we analyze the performance of optical QRNGs with three different arrangements: a homodyne detector measuring vacuum fluctuations, a homodyne detector measuring amplified spontaneous emission from an EDFA and a spontaneous emission phase noise-based generator. The raw data from the experiments is processed using a Toeplitz extractor, giving as a result sequences of binary numbers capable of passing the NIST Statistical Test Suite.Universidade de Vigo/CISU

Mesure des champs de vitesse dans les champs hydrothermaux océaniques

Nous présentons une nouvelle méthode pour déterminer les champs de vitesse dans les champs hydrothermaux présents sur les fonds sous-marins. Basée sur le "background-oriented schlieren", la méthode permet de suivre les anomalies d'indice de réfraction dues à la température ou la composition. Elle a été testée sur des panaches thermiques en laboratoire, puis lors d'une campagne sur la dorsale atlantique

Hydrothermal activity along the slow-spreading Lucky Strike ridge segment (Mid-Atlantic Ridge) : distribution, heatflux, and geological controls

Author Posting. © The Author(s), 2015. This is the author's version of the work. It is posted here by permission of Elsevier for personal use, not for redistribution. The definitive version was published in Earth and Planetary Science Letters 431 (2015): 1730185, doi:10.1016/j.epsl.2015.09.025.We have reviewed available visual information from the seafloor, and recently acquired microbathymetry for several traverses across the Lucky Strike segment, to evaluate the distribution of hydrothermal activity. We have identified a new on-axis site with diffuse flow, Ewan, and anactive vent structure ~1.2 km from the axis, Capelinhos. These sites are minor relative to the Main field, and our total heatflux estimate for all active sites (200-1200 MW) is only slightly higher than previously published estimates. We also identify fossil sites W of the main Lucky Strike field. A circular feature ~200 m in diameter located on the flanks of a rifted off-axis central volcano, is likely a large and inactive hydrothermal edifice, named Grunnus. We find no indicator of focused hydrothermal activity elsewhere along the segment, suggesting that the enhanced melt supply and the associated melt lenses, required to form central volcanoes, also sustain hydrothermal circulation to form and maintain large and long-lived hydrothermal fields. Hydrothermal discharge to the seafloor occurs along fault traces, suggesting focusing of hydrothermal circulation in the shallow crust along permeable fault zones.This work has been partly financed by ANR (France) Mothseim Project NT05-3 42213 toJE, and by EU-RTN-MOMARNET to MC. The French Ministry of Research financed ship, ROV and AUV time (Graviluck’06, MOMAR’08, Bathyluck’09, MOMARSAT cruises in 2010-2015