Empirical wind model for the middle and lower atmosphere. Part 1: Local time average

The HWM90 thermospheric wind model was revised in the lower thermosphere and extended into the mesosphere and lower atmosphere to provide a single analytic model for calculating zonal and meridional wind profiles representative of the climatological average for various geophysical conditions. Gradient winds from CIRA-86 plus rocket soundings, incoherent scatter radar, MF radar, and meteor radar provide the data base and are supplemented by previous data driven model summaries. Low-order spherical harmonics and Fourier series are used to describe the major variations throughout the atmosphere including latitude, annual, semiannual, and longitude (stationary wave 1). The model represents a smoothed compromise between the data sources. Although agreement between various data sources is generally good, some systematic differences are noted, particularly near the mesopause. Root mean square differences between data and model are on the order of 15 m/s in the mesosphere and 10 m/s in the stratosphere for zonal wind, and 10 m/s and 4 m/s, respectively, for meridional wind

Time series comparisons of satellite and rocketsonde temperatures in 1978-1979

The Limb Infrared Monitor of the Stratosphere (LIMS) experiment on Nimbus 7 yielded temperature-versus-pressure (T(p)) profiles for each radiance scan. The present report describes time series comparisons between LIMS and rocketsonde T(p) values at rocketsonde station locations. Sample size has increased up to 665 by this new approach, leading to better statistics for a T(p) validation. The results indicate no clearly significant bias for LIMS versus Datasonde from 10 kPa at low and mid latitudes. There is a positive LIMS bias of 2 to 3 K in the upper stratosphere at high latitudes for the Northern Hemisphere in both winter and spring. LIMS is progressively colder than Datasonde from 0.4 kPa (about -3 K) to 0.1 kPa (about -9 K) at all latitudes. A similar comparison between LIMS and the more accurate falling sphere measurements reveals an equivalent mid-latitude LIMS bias at 0.4 kPa but a much smaller bias at 0.1 kPa (-4.6 K). Because the biases do not vary noticeably with season, it is concluded that they are not a function of atmospheric state. This result confirms the robustness of the LIMS temperature retrieval technique

Changes of radiopacity around implants of different lengths: Five-year follow-up data of a randomized clinical trial

OBJECTIVE To follow-up the radiographic changes in peri-implant bone of short (6 mm, test group) and long (10 mm, control group) single-unit implants five years after loading. MATERIALS AND METHODS Forty-three implants of the test and 44 implants of the control group could be reassessed from 96 originally included implants. Standardized areas of interest (AOI) were defined in the peri-implant bone at pre-defined locations at mid-length on both sides of the implants, and at the apex. An arbitrary mean grey scale value (GSV) was calculated for the AOI after brightness calibration of the radiographs. Changes for GSV were calculated and tested for possible inter- and intra-group differences using the Mann-Whitney and Wilcoxon tests. RESULTS The calculated intra-group differences between baseline and 5 years in the test group accounted for 2.4 ± 19.6 (i.e. slight brightening) and -6.2 ± 20.2 for the control group (i.e. slight shading), which resulted in a statistically significant difference in GSV change (p < .05). Crown-to-implant ratio was the only parameter showing an effect on GSV change (p = .001). CONCLUSIONS Assessing conventional radiographs, longer implants showed a slightly stronger change of radiopacity of the peri-implant bone (slight loss of density) than short ones (slightly enhanced density) after five years of loading

Effect of titanium tetrafluoride and amine fluoride treatment combined with carbon dioxide laser irradiation on enamel and dentin erosion

OBJECTIVE: This in vitro study aimed to analyze the influence of carbon dioxide (CO(2)) laser irradiation on the efficacy of titanium tetrafluoride (TiF(4)) and amine fluoride (AmF) in protecting enamel and dentin against erosion. METHODS: Bovine enamel and dentin samples were pretreated with carbon dioxide (CO(2)) laser irradiation only (group I), TiF(4) only (1% F, group II), CO(2) laser irradiation before (group III) or through (group IV) TiF(4) application, AmF only (1% F, group V), or CO(2) laser irradiation before (group VI) or through (group VII) AmF application. Controls remained untreated. Ten samples of each group were then subjected to an erosive demineralization and remineralization cycling for 5 days. Enamel and dentin loss were measured profilometrically after pretreatment, 4 cycles (1 day), and 20 cycles (5 days) and statistically analyzed using analysis of variance and Scheffe's post hoc tests. Scanning electron microscopy (SEM) analysis was performed in pretreated but not cycled samples (two samples each group). RESULTS: After 20 cycles, there was significantly less enamel loss in groups V and IV and significantly less dentin loss in group V only. All other groups were not significantly different from the controls. Lased surfaces (group I) appeared unchanged in the SEM images, although SEM images of enamel but not of dentin showed that CO(2) laser irradiation affected the formation of fluoride precipitates. CONCLUSION: AmF decreased enamel and dentin erosion, but CO(2) laser irradiation did not improve its efficacy. TiF(4) showed only a limited capacity to prevent erosion, but CO(2) laser irradiation significantly enhanced its ability to reduce enamel erosion

Risk Characteristics of Peri-Implant Infections: A Retrospective Evaluation in a University Consultation Setting

Peri-implantitis is a common biological complication in dentistry. The aim of the present study was to retrospectively analyze risk characteristics in a group of patients referred to a university-based consultation for peri-implantitis. In all, 190 initial cases from 2010 to 2019 were evaluated and descriptively summarized. The evaluation included various parameters such as periodontitis, smoking and oral hygiene status, implant position, type of prosthetic restoration and retention, mucosal quality, and further anamnestic and clinical findings related to the potential risk of developing peri-implantitis. Peri-implantitis was diagnosed in 83% of the cases, with peri-implant mucositis alone in 16% of cases; furthermore, 38% of the patients were diagnosed with active/instable periodontitis, while 14% had stable periodontitis. Residual cement was considered as a potential co-factor of peri-implant inflammation in 43% of cases. Suboptimal implant positioning was found in 19% of patients. Peri-implantitis or peri-implant mucositis was present in about one-third of patients in the absence of smoking and periodontitis factors. Of note, 6% showed no identifiable risk factors. Factors related to an increased risk of peri-implantitis should be taken into consideration when planning implant treatment. Adequate prosthetic implant position, restoration, and cleanability remain important for long-term success

Synchronous vs. asynchronous dynamics of diffusion-controlled reactions

An analytical method based on the classical ruin problem is developed to compute the mean reaction time between two walkers undergoing a generalized random walk on a 1d lattice. At each time step, either both walkers diffuse simultaneously with probability $p$ (synchronous event) or one of them diffuses while the other remains immobile with complementary probability (asynchronous event). Reaction takes place through same site occupation or position exchange. We study the influence of the degree of synchronicity $p$ of the walkers and the lattice size $N$ on the global reaction's efficiency. For odd $N$, the purely synchronous case ($p=1$) is always the most effective one, while for even $N$, the encounter time is minimized by a combination of synchronous and asynchronous events. This new parity effect is fully confirmed by Monte Carlo simulations on 1d lattices as well as for 2d and 3d lattices. In contrast, the 1d continuum approximation valid for sufficiently large lattices predicts a monotonic increase of the efficiency as a function of $p$. The relevance of the model for several research areas is briefly discussed.Comment: 21 pages (including 12 figures and 4 tables), uses revtex4.cls, accepted for publication in Physica

Effects of dorsolateral prefrontal cortex lesion on motor habit and performance assessed with manual grasping and control of force in macaque monkeys.

In the context of an autologous adult neural cell ecosystem (ANCE) transplantation study, four intact adult female macaque monkeys underwent a unilateral biopsy of the dorsolateral prefrontal cortex (dlPFC) to provide the cellular material needed to obtain the ANCE. Monkeys were previously trained to perform quantitative motor (manual dexterity) tasks, namely, the "modified-Brinkman board" task and the "reach and grasp drawer" task. The aim of the present study was to extend preliminary data on the role of the prefrontal cortex in motor habit and test the hypothesis that dlPFC contributes to predict the grip force required when a precise level of force to be generated is known beforehand. As expected for a small dlPFC biopsy, neither the motor performance (score) nor the spatiotemporal motor sequences were affected in the "modified-Brinkman board" task, whereas significant changes (mainly decreases) in the maximal grip force (force applied on the drawer knob) were observed in the "reach and grasp drawer" task. The present data in the macaque monkey related to the prediction of grip force are well in line with the previous fMRI data reported for human subjects. Moreover, the ANCE transplantation strategy (in the case of stroke or Parkinson's disease) based on biopsy in dlPFC does not generate unwanted motor consequences, at least as far as motor habit and motor performance are concerned in the context of a sequential grasping a small objects, which does not require the development of significant force levels

Bending and torsional stiffness measurements of equine radii and tibiae

This study was a re-evaluation of static mechanical testing of equine long bones as part of a larger study on impact failure modes and strength of the same bones. Supplementary to other morphological and mechanical tests, static stiffness properties of these long bones were non-destructively determined. The goal was to quantify stiffness properties of the diaphysis of equine radii and tibiae in quasi-static bending as well as when loaded in torsion and to check for possible age and gender effects on these properties. Fifty-six equine bones (tibiae and radii) from fifteen horses were first tested in a torsion machine and subsequently fifty-five of them investigated using a 3-point-bending test-setup. A maximum torque of 150 N*m and a maximum bending moment of 920 N*m were applied in steps. Loading and unloading was performed in order to check for hysteresis effects. The outcome for both type of bones (tibiae and radii) was described statistically in relation to age (young, middle aged, and old) and gender (geldings and mares). Additional information on the side (left and right), breed and use of the horse (competition versus ‘other’, such as pleasure) was excluded from statistical modelling after preliminary analysis. While the loading-unloading cycles in bending showed some hysteresis due to localized deformation, the unloading curve followed the loading curve in torsional loading. Bending stiffness of tibiae is on average 6’813 N/mm and of radii 6’130 N/mm. Torsional stiffness of tibiae is 2.36*106 N*m(rad/mm), and of radii 1.90*106 N*m(rad/mm). Tibiae were clearly stiffer than radii. A trend of higher bone stiffness for geldings compared with mares and for younger horses could be found, although not statistically significant

Labial soft tissue volume evaluation of different techniques for ridge preservation after tooth extraction: a randomized controlled clinical trial

OBJECTIVE: To volumetrically evaluate soft tissue changes of different ridge preservation techniques compared to spontaneous healing 6 months after tooth extraction. MATERIALS AND METHODS: In each of 40 patients, one single-rooted tooth was extracted and four treatment modalities were randomly assigned to the following groups (n = 10 each): A) ß-tricalcium-phosphate-particles with a polylactid coating (ß-TCP), B) demineralized bovine bone mineral with 10% collagen covered with a collagen matrix (DBBM-C/CM), C) DBBM with 10% collagen covered with an autogenous soft tissue punch graft (DBBM-C/PG), D) spontaneous healing (control). Impressions were obtained before extraction and 6 months later, casts were digitized and volumetric changes at the buccal soft tissues were determined. One-way anova was performed and pair-wise Wilcoxon rank sum test with Bonferroni-Holm method was applied for comparison of differences between two groups. RESULTS: After 6 months, horizontal contour changes accounted for -1.7 ± 0.7 mm (A), -1.2 ± 0.5 mm (B), -1.2 ± 0.7 mm (C) and -1.8 ± 0.8 mm (D). None of the group comparisons reached statistical significance. CONCLUSIONS: Six months after tooth extraction all groups revealed a horizontal volume change in the buccal soft tissue contour. Application of DBBM-C/CM or DBBM-C/PG reduced the amount of volume resorption compared to ß-TCP or spontaneous healing without reaching statistically significant difference

Association of 1,5-Anhydroglucitol and 2-h Postprandial Blood Glucose in Type 2 Diabetic Patients

OBJECTIVE—To assess the association of 1,5-anhydroglucitol (1,5-AG) with 2-h postprandial glucose values in type 2 diabetic patients followed over 12 months in an outpatient setting