162 research outputs found
Historical analysis of U.S. onshore hazardous liquid pipeline accidents triggered by natural hazards
n/
Industrial accidents triggered by natural hazards: an emerging risk issue
The threat of natural hazards impacting chemical facilities and infrastructures with the subsequent release of hazardous substances has been recognised as an emerging risk which is likely to be exacerbated by the ongoing climate change. Within the European FP7 project iNTeg-Risk, efforts are dedicated to address the problem of Natech accidents by trying to understand their underlying causes and by developing methodologies and tools to assess Natech risk. Special attention is thereby given to the risk of chemical accidents triggered by earthquakes, floods and lightning. This work outlines the ongoing efforts in the development of new concepts and tools for Natech hazard and vulnerability ranking, risk assessment, risk-based design, and emergency planning and early warning
Industrial accidents triggered by natural hazards: an emerging risk issue
Abstract. The threat of natural hazards impacting chemical facilities and infrastructures with the subsequent release of hazardous substances has been recognised as an emerging risk which is likely to be exacerbated by the ongoing climate change. Within the European FP7 project iNTeg-Risk, efforts are dedicated to address the problem of Natech accidents by trying to understand their underlying causes and by developing methodologies and tools to assess Natech risk. Special attention is thereby given to the risk of chemical accidents triggered by earthquakes, floods and lightning. This work outlines the ongoing efforts in the development of new concepts and tools for Natech hazard and vulnerability ranking, risk assessment, risk-based design, and emergency planning and early warning
Accident scenarios caused by lightning impact on atmospheric storage tanks
In recent years, severe natural events raised the concern for the so-called NaTech (natural-technological) accident scenarios: Technological accidents caused by the impact of a natural event on an industrial facility or infrastructure. Severe scenarios typical of the process industry, as fires, explosions, toxic releases, and water pollution were reported as the consequence of natural events in industrial areas. The historical analysis of accidental scenarios triggered by lightning shows that the impact of a lightning on an atmospheric storage tank might be the initiating event of a severe accident. The analysis of past accident evidences that several alternative damage mechanisms and accident scenarios may follow lightning impact. Although lightning hazard is well known and is usually considered in the risk analysis of chemical and process plants, well accepted quantitative procedures to assess the contribution of accidents triggered by lightning to industrial risk are still lacking. In particular, the approaches to the assessment of accident scenarios following lightning strike are mostly based on expert judgment. In the present study, a detailed methodology is presented for the assessment of quantified event trees following lightning impact on an atmospheric tank. Different damage mechanisms have been considered in order to assess the frequencies of loss of containment due to lightning strikes. The results were used in a case study to assess the overall risk due to lightning impact scenarios in typical lay-outs of tank farms of oil refineries. Copyright © 2013, AIDIC Servizi S.r.l
Direct neutron capture of 48Ca at kT = 52 keV
The neutron capture cross section of 48Ca was measured relative to the known
gold cross section at kT = 52 keV using the fast cyclic activation technique.
The experiment was performed at the Van-de-Graaff accelerator, Universitaet
Tuebingen. The new experimental result is in good agreement with a calculation
using the direct capture model. The 1/v behaviour of the capture cross section
at thermonuclear energies is confirmed, and the adopted reaction rate which is
based on several previous experimental investigations remains unchanged.Comment: 9 pages (uses Revtex), 2 postscript figures, accepted for publication
as Brief Report in Phys. Rev.
Is there a 1970s syndrome? Analyzing structural breaks in the metabolism of industrial economies
In this paper we focus on long-term socio-ecological transitions from the agrarian to the industrial metabolic regime. Statistical analysis is used to identify structural breaks in the development of energy use in the second half of the 20th century. A stabilization of per capita energy and resource use in most high-income countries was reached in the early 1970s, after a period of accelerated growth of resource use since the end of World War II. Most empirical turns in trend coincide with the oil price crises of 1973 and 1979. This stabilization could offer lessons for a future sustainability transition
Direct Neutron Capture for Magic-Shell Nuclei
In neutron capture for magic--shell nuclei the direct reaction mechanism can
be important and may even dominate. As an example we investigated the reaction
Ca(n,Ca for projectile energies below 250\,keV in a direct
capture model using the folding procedure for optical and bound state
potentials. The obtained theoretical cross sections are in agreement with the
experimental data showing the dominance of the direct reaction mechanism in
this case. The above method was also used to calculate the cross section for
Ca(n,Ca.Comment: REVTeX, 7 pages plus 3 uuencoded figures, the complete uuencoded
postscript file is available at ftp://is1.kph.tuwien.ac.at/pub/ohu/calcium.u
Measurement of neutron capture on Ca at thermal and thermonuclear energies
At the Karlsruhe pulsed 3.75\,MV Van de Graaff accelerator the thermonuclear
Ca(n,)Ca(8.72\,min) cross section was measured by the
fast cyclic activation technique via the 3084.5\,keV -ray line of the
Ca-decay. Samples of CaCO enriched in Ca by 77.87\,\% were
irradiated between two gold foils which served as capture standards. The
capture cross-section was measured at the neutron energies 25, 151, 176, and
218\,keV, respectively. Additionally, the thermal capture cross-section was
measured at the reactor BR1 in Mol, Belgium, via the prompt and decay
-ray lines using the same target material. The
Ca(n,)Ca cross-section in the thermonuclear and thermal
energy range has been calculated using the direct-capture model combined with
folding potentials. The potential strengths are adjusted to the scattering
length and the binding energies of the final states in Ca. The small
coherent elastic cross section of Ca+n is explained through the nuclear
Ramsauer effect. Spectroscopic factors of Ca have been extracted from
the thermal capture cross-section with better accuracy than from a recent (d,p)
experiment. Within the uncertainties both results are in agreement. The
non-resonant thermal and thermonuclear experimental data for this reaction can
be reproduced using the direct-capture model. A possible interference with a
resonant contribution is discussed. The neutron spectroscopic factors of
Ca determined from shell-model calculations are compared with the values
extracted from the experimental cross sections for Ca(d,p)Ca and
Ca(n,)Ca.Comment: 15 pages (uses Revtex), 7 postscript figures (uses psfig), accepted
for publication in PRC, uuencoded tex-files and postscript-files also
available at ftp://is1.kph.tuwien.ac.at/pub/ohu/Ca.u
Dependence of direct neutron capture on nuclear-structure models
The prediction of cross sections for nuclei far off stability is crucial in
the field of nuclear astrophysics. We calculate direct neutron capture on the
even-even isotopes Sn and Pb with energy levels,
masses, and nuclear density distributions taken from different
nuclear-structure models. The utilized structure models are a
Hartree-Fock-Bogoliubov model, a relativistic mean field theory, and a
macroscopic-microscopic model based on the finite-range droplet model and a
folded-Yukawa single-particle potential. Due to the differences in the
resulting neutron separation and level energies, the investigated models yield
capture cross sections sometimes differing by orders of magnitude. This may
also lead to differences in the predicted astrophysical r-process paths.
Astrophysical implications are discussed.Comment: 25 pages including 12 figures, RevTeX, to appear in Phys. Rev.
A proposal for a workable analysis of Energy Return on Investment (EROI) in agroecosystems. Part I: Analytical approach
This paper presents a workable approach to the energy analysis of past and present agroecosystems aimed to contribute to their sustainability assessment. This analysis sees the agroecosystem as a set of energy loops between nature and society, and adopts a farm-operator standpoint at landscape level that involves setting specific system boundaries. This in turn entails a specific form to account for energy outputs as well as inputs. According to this conceptual approach, a clear distinction between Unharvested Phytomass, Land Produce and Final Produce is established, and also a sharp divide is adopted between the energy content of internal flows of Biomass Reused and external Societal Inputs when accounting for the amount of Total Inputs Consumed . Treating the conversion of solar radiation into local biomass as a gift of nature, enthalpy values of energy carriers are accounted for net Final Produce going outside as well as for Biomass Reused or Unharvested Phytomass , given that all these flows are evaluated from inside the agroecosystem. On the other hand, the external energy carriers are accounted for as embodied values by adding up direct and indirect energy carriers required to produce or deliver these Societal Inputs to the agroecosystem. The human Labour performed by the farm operators is treated as a special case of external input. It is accounted for the fraction of their energy intake devoted to perform agricultural work, by only using enthalpy or adding transport embodied values depending on the local or external origin of ingredients of the food basket. Following this line of reasoning we propose the definition of two different sets of agroecosystem’s Energy Returns On Energy Inputs (EROIs), depending on whether we use as numerator the Final Produce or the total phytomass harvested and unharvested included in the actual Net Primary Production. By comparing Final EROI with NPP act EROI we can obtain a proxy useful to assess whether the different paths taken by the energy throughputs may undermine or not biodiversity and soil fertility in agroecosystems. Then, by alternatively including or excluding Biomass Reused and External Inputs in the denominator, we split Final EROI into their respective energy returns to either internal or external inputs. This leads to a four interrelated EROIs whose meanings, shortcomings or ambiguities are examined respectively, in order to combine them all to draw the sociometabolic energy profiles of different sorts of agroecosystems along the socio-ecological transitions from traditional organic to industrial farm systems. The conceptual and quantitative relationships between the internal and external returns of Final EROI provide a method to decompose both dimensions in a way that clarifies their respective roles when comparing different agroecosystems, and reveals their capacity for increasing energy yields. This decomposition analysis also facilitates graphing their changing energy profiles through socio-ecological transitions along history. Finally, we suggest other related or derived indicators that can be useful for different purposes. With the bookkeeping proposed the energy analysis of farm systems is widened so as to highlight the role played by the biomass unharvested or internally reused in keeping the ecological services that biodiversity and soil fertility provide. This may also allow to test in agro-forest mosaics the Intermediate Disturbance Hypothesis long debated in ecology, by linking our energy analysis with landscape ecology metrics.Peer ReviewedPostprint (published version
- …