Helminth fauna of Lebanon lizard, Phoenicolacerta laevis (Gray, 1838), (Squamata: Lacertidae) from Southern Turkey

In the years 2010 and 2014, fifty-four samples of Phoenicolacerta laevis from eight localities in Adana (n=6) and Hatay (n=48) were collected and examined for helminth parasites. New host and locality records were recorded. As a results of present study, three species of Digenea, Sonsinotrema tacapense, Prosthodendrium chilostomum, Brachylaima sp. (metacercaria); two species of Cestoda, Oochoristica tuberculata and Mesocestoides sp. and four species of Nematoda, Skrjabinodon medinae, Spauligodon sp., Thubunaea sp. and a larva of the Ascaridiidae Ascarididae gen. sp. were reported for lizard samples. We document new host records for all of helminth species reported here. Sonsionotrema tacapense (Digenea), and Thubunaea sp. (Nematoda) are recorded for the first time from Turkey. There are, to our knowledge, no reports of helminths for P. laevis in Turkey and also from its range

Effect of Mill Type on Morphology of AA6013 Aluminium Powder

ABSTRACTIn conventional recycling method, metal chips are cast after pressing and melting in electric arc furnace. Material loss occurs during the recycling from liquid metal due to the several reasons. Direct recycling method which produces the aluminium powder from aluminium chips using mechanical mill can be an alternative to conventional recycling method. Thus material and energy losses, and labour cost will be reduced by direct recycling method without melting.In this study, the particle morphology of powder direct recycled from AA6013 aluminium alloy chips with cryogenic, disc and ball type grinders is investigated. Mechanical milling resulted flaky and irregular shaped AA6013 particles. It was ascertained that the chips did not break sufficiently in despite of the long duration milling mechanisms by ball mill. Cryogenic mill provides the energy required for milling mechanisms to act. Disc mill has the highest impact energy was determined. Consequently, efficiency of ball mill is lower than the efficiency of cryogenic and disc type mills. Shape factors of powders produced with ball and cryogenic mills were found greater than that of the powder produced by disc mill. Disc mill has the most efficient and effective impact energy which produces the smaller particles per minute, was determined.Keywords: Direct recycling method, powder production, scrap chips, aluminium alloy.

Hadronic EDMs, the Weinberg Operator, and Light Gluinos

We re-examine questions concerning the contribution of the three-gluon Weinberg operator to the electric dipole moment of the neutron, and provide several QCD sum rule-based arguments that the result is smaller than - but nevertheless consistent with - estimates which invoke naive dimensional analysis. We also point out a regime of the MSSM parameter space with light gluinos for which this operator provides the dominant contribution to the neutron electric dipole moment due to enhancement via the dimension five color electric dipole moment of the gluino.Comment: 6 pages, RevTeX, 3 figures; v2: references added; v3: typos corrected, to appear in Phys. Rev.

CP Violation in Supersymmetric U(1)' Models

The supersymmetric CP problem is studied within superstring-motivated extensions of the MSSM with an additional U(1)' gauge symmetry broken at the TeV scale. This class of models offers an attractive solution to the mu problem of the MSSM, in which U(1)' gauge invariance forbids the bare mu term, but an effective mu parameter is generated by the vacuum expectation value of a Standard Model singlet S which has superpotential coupling of the form SH_uH_d to the electroweak Higgs doublets. The effective mu parameter is thus dynamically determined as a function of the soft supersymmetry breaking parameters, and can be complex if the soft parameters have nontrivial CP-violating phases. We examine the phenomenological constraints on the reparameterization invariant phase combinations within this framework, and find that the supersymmetric CP problem can be greatly alleviated in models in which the phase of the SU(2) gaugino mass parameter is aligned with the soft trilinear scalar mass parameter associated with the SH_uH_d coupling. We also study how the phases filter into the Higgs sector, and find that while the Higgs sector conserves CP at the renormalizable level to all orders of perturbation theory, CP violation can enter at the nonrenormalizable level at one-loop order. In the majority of the parameter space, the lightest Higgs boson remains essentially CP even but the heavier Higgs bosons can exhibit large CP-violating mixings, similar to the CP-violating MSSM with large mu parameter.Comment: 29 pp, 3 figs, 2 table

Maternal smoking during pregnancy and offspring overweight : is there a dose–response relationship? An individual patient data meta-analysis

We want to thank the funders of the individual studies: the UK Medical Research Council and the Wellcome Trust (Grant ref: 102215/2/13/2) and the University of Bristol, the Danish National Research Foundation, Pharmacy Foundation, the March of Dimes Birth Defects Foundation, the Augustinus Foundation, and the Health Foundation, the US NICHD (contracts no. 1-HD-4-2803 and no. 1-HD-1-3127, R01 HD HD034568), the NHMRC, the CNPq (Portuguese acronym for the National Research Council—grant 523474/96-2) and FAPESP (Portuguese acronym for the São Paulo State Research Council—grant 00/0908-7). We would like to thank the participating families of all studies for the use of data. For the ASPAC study, we want to thank the midwives for their help in recruiting families, and the whole ALSPAC team, which includes interviewers, computer and laboratory technicians, clerical workers, research scientists, volunteers, managers, receptionists, and nurses. This work was supported by the Deutschen Forschungsgesellschaft (German Research Foundation, DFG) [KR 1926/9-1, KU1443/4-1]. Dr. Gilman’s contribution was supported by the Intramural Research Program of the Eunice Kennedy Shriver National Institute of Child Health and Human Development.Peer reviewedPostprin

ANN-Based wear performance prediction for plasma nitrided Ti6AI4V Alloy

Surface modification of a Ti6A14V titanium alloy was made by the plasma nitriding process. Plasma nitriding was performed in a constant gas mixture of 20% H2-80% N2 at temperatures between 700 and 1000° C and process times between 2 and 15 h. Samples nitrided at different treatment times and temperatures were subjected to the dry sliding wear test using the pin-on-disc set up under 80N normal load with rotational speed of counter face disc of 0.8 m/s at room conditions. An artificial neural network (ANN) model of was developed for prediction of wear performance of the plasma nitrided Ti6A14V alloy. The inputs of the ANN model were processing times and temperatures, diffusion layer thickness, Ti2N thickness, TiN thickness and hardness. The output of the ANN model was wear loss. The model is based on the multilayer backpropagation neural technique. The ANN was trained with a comprehensive dataset collected from experimental conditions and results of authors. The model can be used for the prediction of wear properties of Ti6A14V alloys nitrided at different parameters. The ANN model demonstrated the best statistical performance with the experimental results. © Carl Hanser Verlag, München

Characterization of chemically deposited ZnSe/SnO2/glass films: Influence of annealing in Ar atmosphere on physical properties

The Zinc Selenide (ZnSe) thin films have been deposited on SnO2/glass substrates by a simple and inexpensive chemical bath deposition (CBD). The structural, optical and electrical properties of ZnSe films have been characterized by X-ray diffraction (XRD), Energy Dispersive X-ray Analysis (EDAX), optical absorption spectroscopy, and four point probe techniques, respectively. The films have been subjected to different annealing temperature in Argon (Ar) atmosphere. An increase in annealing temperature does not cause a complete phase transformation whereas it affects the crystallite size, dislocation density and strain. The optical band gap (E-g) of the as-deposited film is estimated to be 3.08 eV and decreases with increasing annealing temperature down to 2.43 eV at 773 K. The as-deposited and annealed films show typical semiconducting behaviour, d rho/dT>0. Interestingly, the films annealed at 373 K, 473 K, and 573 K show two distinct temperature dependent regions of electrical resistivity; exponential region at high temperature, linear region at low temperature. The temperature at which the transition takes place from exponential to linear region strongly depends on the annealing temperature. (C) 2011 Elsevier B. V. All rights reserved