67 research outputs found

    Buried pipelines with bends:Analytical verification against permanent ground displacements

    Get PDF
    Available analytical methodologies for the strength verification of buried pipelines against large permanent ground displacements (PGDs) apply only to straight pipeline segments. Hence, a new methodology is proposed herein for the analytical computation of pipeline strains in bends of arbitrary angle and radius of curvature, located outside the PGD high-curvature zone but within the pipelineâ s unanchored length. The methodology is based on the equivalent-linear analysis of the bend, assuming that it will perform as an elastic arched beam subjected to uniformly distributed ultimate axial and transverse horizontal soil reactions. The end of the bend towards the PGD zone is subjected to an axial displacement, calculated on the basis of overall displacement compatibility along the pipeline, while the other end is restrained by the unanchored pipeline segment beyond the bend. Using this approach, the maximum axial force at the vicinity of the PGD zone can be also calculated and consequently used for the estimation of the corresponding pipeline strains with any of the available numerical or analytical methodologies for straight pipeline segments. Parametric non-linear finite element analyses are performed in order to verify the analytical methodology and also derive conclusions of practical interest regarding the effect of bends on pipeline design.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author

    Seismic settlements of shallow foundations:a sliding block approach

    Get PDF

    A non-associative macro-element model for vertical plate anchors in clay

    Get PDF
    This work proposes a new plastic hardening, non-associative macro-element model to predict the behaviour of anchors in clay for floating offshore structures during keying and up to the peak load. Building on available models for anchors, a non-associated plastic potential is introduced to improve prediction of anchor trajectory and loss of embedment at peak conditions for a large range of padeye offsets and different pull-out directions. The proposed model also includes a displacement-hardening rule to simulate the force and displacement mobilisation at the early stages of the keying process. The model is challenged and validated against different sets of numerical and centrifuge data. This extensive validation process revealed that two of the four newly introduced model parameters assume a constant value for the range of simulated cases. This suggests that only two of the newly introduced parameters may need to be calibrated for the use of the proposed macro-element model in practice.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author

    Experimental and numerical modelling of buried pipelines crossing reverse faults

    Get PDF
    Fault rupture is one of the main hazards for continuous buried pipelines and the problem is often investigated experimentally and numerically. While experimental data exists for pipeline crossing strike-slip and normal fault, limited experimental work is available for pipeline crossing reverse faults. This paper presents results from a series of tests investigating the behaviour of continuous buried pipeline subjected to reverse fault motion. A new experimental setup for physical modelling of pipeline crossing reverse fault is developed and described. Scaling laws and non-dimensional groups are derived and subsequently used to analyse the test results. Three-dimensional Finite Element (3D FE) analysis is also carried out using ABAQUS to investigate the pipeline response to reverse faults and to simulate the experiments. Finally, practical implications of the study are discussed

    Macro-element modelling of suction-embedded plate anchors for floating offshore structures

    Get PDF
    This work presents a new macro-element model to predict the behaviour of Suction Embedded Plate Anchors (SEPLAs) for floating offshore structures during keying and loading stages. Differently from previously published models for anchors, this new model is characterised by (i) a non-associated plastic potential with the aim of improving the prediction of anchor trajectory for the whole displacement domain and for a large range of padeye offsets; and (ii) by a strain-hardening rule enabling to predict the force and displacement mobilisation from the early stages of the keying process. The model was calibrated against LDFE analyses and compared with a broad set of LDFE and centrifuge tests results. The model proves capable of reproducing anchor rotation and displacement with good accuracy for a wide range of padeye offsets and distinct studies from the literature

    Effect of Soil-Structure Interaction on Nonlinear Dynamic Response of Reinforced Concrete Structures

    Get PDF
    Investigating the nonlinear dynamic response of reinforced concrete (RC) structures is of significant importance in understanding the expected behavior of these structures under dynamic loading. This becomes more crucial during the design of new or the assessment of the existing RC structures that are located in seismically active areas. The numerical simulation of this problem through the use of detailed 3D modeling is still a subject that has not been investigated thoroughly due to the significant challenges related to numerical instabilities and excessive computational demand, especially when the soil–structure interaction (SSI) phenomenon is accounted for. This study aims at presenting a nonlinear simulation tool to investigate this numerically cumbersome problem in order to provide further inside into the SSI effect on RC structures under nonlinear dynamic loading conditions. A detailed 3D numerical model of full-scale RC structures considering the SSI effect through modeling the nonlinear frame and soil domain is performed and discussed herein. The constructed models are subjected to dynamic loading conditions and an elaborate investigation is presented considering different type of structures, material properties of soil domains and depths. The RC structures and the soil domains are modeled through 8-noded hexahedral isoparametric elements, where the steel bar reinforcement of concrete is modeled as embedded beam and truss finite elements. The Ramberg–Osgood constitutive law was used for modeling the soil domain. It was shown that the SSI effect can significantly increase the flexibility of the system, altering the nonlinear dynamic response of the RC frames causing local damages that are not observed when the fixed-base model is analyzed. Furthermore, it was found that the structures founded on soft soil developed larger base-shear compared to the fixed-base model which is attributed to resonance phenomena connected to the SSI effect and the imposed accelerograms
    • …
    corecore