Modular Air-Coupled Ultrasonic Multichannel System for Inline NDT

AbstractIn many production processes it is important to detect in a very early stage basic errors in the fabricatedmaterial. If the errors are not visible from the exterior, ultrasonic inspection is a convenient technique,at least if the nature of the error influences the characteristics of sound passing through the material.Examples are local density variations in non-wovens, delaminations in composites, bad bondings inlaminates, inclusions, cracks or other artefacts in plastic or metal plates, etc. There are two major,difficult requirements imposed by industry to the used detection technique: the sensors shouldn’t makephysical contact with the material and the speed of testing must be sufficiently high to enable testingin-line. The former requirement can be met by employing an air-coupled ultrasonic approach, the latterby using a multichannel system.We propose a modular air-coupled ultrasonic multichannel system.Each multichannel module contains12 air-coupled transducers and exists in a transmitter and a receiver version. The desired scan width isobtained by connecting several modules to each other. During the scanning all transducers are spatially fixed while the material is moving forward. This way, speeds up to 1m/s are possible, irrespective ofthe width of the material. To that purpose a FPGA based platform with parallel processing of largenumbers of data streams is implemented in the modules. This allows the implementation of all kind ofprocedures, going from point measurements to more sophisticated techniques.In spite of all measurements being performed in ambient air, the ultrasonic frequency is rather high(1MHz), but lower frequencies are possible as well. The most obvious set-up of the modules is a through-transmission configuration. However the system can also be used in a pitch-catch configuration which isvery suitable for one-sided testing of thick materials. An examples established in the laboratory is shownto illustrate the performance

Search for the best indicators for the presence of a VPS13B gene mutation and confirmation of diagnostic criteria in a series of 34 patients genotyped for suspected Cohen syndrome

BACKGROUND: Cohen syndrome is a rare autosomal recessive inherited disorder that results from mutations of the VPS13B gene. Clinical features consist of a combination of mental retardation, facial dysmorphism, postnatal microcephaly, truncal obesity, slender extremities, joint hyperextensibility, myopia, progressive chorioretinal dystrophy, and intermittent neutropenia.PATIENTS AND METHODS: The aim of the study was to determine which of the above clinical features were the best indicators for the presence of VPS13B gene mutations in a series of 34 patients with suspected Cohen syndrome referred for molecular analysis of VPS13B. RESULTS: 14 VPS13B gene mutations were identified in 12 patients, and no mutation was found in 22 patients. The presence of chorioretinal dystrophy (92% vs 32%, p=0.0023), intermittent neutropenia (92% vs 5%, p<0.001), and postnatal microcephaly (100% vs 48%, p=0.0045) was significantly higher in the group of patients with a VPS13B gene mutation compared to the group of patients without a mutation. All patients with VPS13B mutations had chorioretinal dystrophy and/or intermittent neutropenia. The Kolehmainen diagnostic criteria provided 100% sensibility and 77% specificity when applied to this series. CONCLUSION: From this study and a review of more than 160 genotyped cases from the literature, it is concluded that, given the large size of the gene, VPS13B screening is not indicated in the absence of chorioretinal dystrophy or neutropenia in patients aged over 5 years. The follow-up of young patients could be a satisfactory alternative unless there are some reproductive issues

Motor Fatigue Measurement by Distance-Induced Slow Down of Walking Speed in Multiple Sclerosis

Background: Motor fatigue and ambulation impairment are prominent clinical features of people with multiple sclerosis (pMS). We hypothesized that a multimodal and comparative assessment of walking speed on short and long distance would allow a better delineation and quantification of gait fatigability in pMS. Objectives: To compare 4 walking paradigms: the timed 25-foot walk (T25FW), a corrected version of the T25FW with dynamic start (T25FW+), the timed 100-meter walk (T100MW) and the timed 500-meter walk (T500MW). Methods: Thirty controls and 81 pMS performed the 4 walking tests in a single study visit. Results: The 4 walking tests were performed with a slower WS in pMS compared to controls even in subgroups with minimal disability. The finishing speed of the last 100-meter of the T500MW was the slowest measurable WS whereas the T25FW+ provided the fastest measurable WS. The ratio between such slowest and fastest WS (Deceleration Index, DI) was significantly lower only in pMS with EDSS 4.0-6.0, a pyramidal or cerebellar functional system score reaching 3 or a maximum reported walking distance !4000m. Conclusion: The motor fatigue which triggers gait deceleration over a sustained effort in pMS can be measured by the WS ratio between performances on a very short distance and the finishing pace on a longer more demanding task. The absolute walking speed is abnormal early in MS whatever the distance of effort when patients are unaware of ambulation impairment. In contrast, the DI-measured ambulation fatigability appears to take place later in the disease course

Global Analysis of Quorum Sensing Targets in the Intracellular Pathogen Brucella melitensis 16 M

Many pathogenic bacteria use a regulatory process termed quorum sensing (QS) to produce and detect small diffusible molecules to synchronize gene expression within a population. In Gram-negative bacteria, the detection of, and response to, these molecules depends on transcriptional regulators belonging to the LuxR family. Such a system has been discovered in the intracellular pathogen Brucella melitensis, a Gram-negative bacterium responsible for brucellosis, a worldwide zoonosis that remains a serious public health concern in countries were the disease is endemic. Genes encoding two LuxR-type regulators, VjbR and BabR, have been identified in the genome of B. melitensis 16 M. A DeltavjbR mutant is highly attenuated in all experimental models of infection tested, suggesting a crucial role for QS in the virulence of Brucella. At present, no function has been attributed to BabR. The experiments described in this report indicate that 5% of the genes in the B. melitensis 16 M genome are regulated by VjbR and/or BabR, suggesting that QS is a global regulatory system in this bacterium. The overlap between BabR and VjbR targets suggest a cross-talk between these two regulators. Our results also demonstrate that VjbR and BabR regulate many genes and/or proteins involved in stress response, metabolism, and virulence, including those potentially involved in the adaptation of Brucella to the oxidative, pH, and nutritional stresses encountered within the host. These findings highlight the involvement of QS as a major regulatory system in Brucella and lead us to suggest that this regulatory system could participate in the spatial and sequential adaptation of Brucella strains to the host environment.Journal ArticleResearch Support, Non-U.S. Gov'tSCOPUS: ar.jinfo:eu-repo/semantics/publishe

Genome Sequence of Brucella abortus Vaccine Strain S19 Compared to Virulent Strains Yields Candidate Virulence Genes

The Brucella abortus strain S19, a spontaneously attenuated strain, has been used as a vaccine strain in vaccination of cattle against brucellosis for six decades. Despite many studies, the physiological and molecular mechanisms causing the attenuation are not known. We have applied pyrosequencing technology together with conventional sequencing to rapidly and comprehensively determine the complete genome sequence of the attenuated Brucella abortus vaccine strain S19. The main goal of this study is to identify candidate virulence genes by systematic comparative analysis of the attenuated strain with the published genome sequences of two virulent and closely related strains of B. abortus, 9–941 and 2308. The two S19 chromosomes are 2,122,487 and 1,161,449 bp in length. A total of 3062 genes were identified and annotated. Pairwise and reciprocal genome comparisons resulted in a total of 263 genes that were non-identical between the S19 genome and any of the two virulent strains. Amongst these, 45 genes were consistently different between the attenuated strain and the two virulent strains but were identical amongst the virulent strains, which included only two of the 236 genes that have been implicated as virulence factors in literature. The functional analyses of the differences have revealed a total of 24 genes that may be associated with the loss of virulence in S19. Of particular relevance are four genes with more than 60bp consistent difference in S19 compared to both the virulent strains, which, in the virulent strains, encode an outer membrane protein and three proteins involved in erythritol uptake or metabolism

Morphological analysis of the sheathed flagellum of Brucella melitensis

<p>Abstract</p> <p>Background</p> <p>It was recently shown that <it>B. melitensis </it>is flagellated. However, the flagellar structure remains poorly described.</p> <p>Findings</p> <p>We analyzed the structure of the polar sheathed flagellum of <it>B. melitensis </it>by TEM analysis and demonstrated that the Ryu staining is a good method to quickly visualize the flagellum by optical microscopy. The TEM analysis demonstrated that an extension of the outer membrane surrounds a filament ending by a club-like structure. The Δ<it>ftcR</it>, Δ<it>fliF</it>, Δ<it>flgE </it>and Δ<it>fliC </it>flagellar mutants still produce an empty sheath.</p> <p>Conclusions</p> <p>Our results demonstrate that the flagellum of <it>B. melitensis </it>has the characteristics of the sheathed flagella. Our results also suggest that the flagellar sheath production is not directly linked to the flagellar structure assembly and is not regulated by the FtcR master regulator.</p

The Glyceraldehyde-3-Phosphate Dehydrogenase and the Small GTPase Rab 2 Are Crucial for Brucella Replication

The intracellular pathogen Brucella abortus survives and replicates inside host cells within an endoplasmic reticulum (ER)-derived replicative organelle named the “Brucella-containing vacuole” (BCV). Here, we developed a subcellular fractionation method to isolate BCVs and characterize for the first time the protein composition of its replicative niche. After identification of BCV membrane proteins by 2 dimensional (2D) gel electrophoresis and mass spectrometry, we focused on two eukaryotic proteins: the glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and the small GTPase Rab 2 recruited to the vacuolar membrane of Brucella. These proteins were previously described to localize on vesicular and tubular clusters (VTC) and to regulate the VTC membrane traffic between the endoplasmic reticulum (ER) and the Golgi. Inhibition of either GAPDH or Rab 2 expression by small interfering RNA strongly inhibited B. abortus replication. Consistent with this result, inhibition of other partners of GAPDH and Rab 2, such as COPI and PKC ι, reduced B. abortus replication. Furthermore, blockage of Rab 2 GTPase in a GDP-locked form also inhibited B. abortus replication. Bacteria did not fuse with the ER and instead remained in lysosomal-associated membrane vacuoles. These results reveal an essential role for GAPDH and the small GTPase Rab 2 in B. abortus virulence within host cells