50 research outputs found
Nanotrench for nano and microparticle electrical interconnects
We present a simple and versatile patterning procedure for the reliable and reproducible fabrication of high aspect ratio (10 4 ) electrical interconnects that have separation distances down to 20 nm and lengths of several hundreds of microns. The process uses standard optical lithography techniques and allows parallel processing of many junctions, making it easily scalable and industrially relevant. We demonstrate the suitability of these nanotrenches as electrical interconnects for addressing micro and nanoparticles by realizing several circuits with integrated species. Furthermore, low impedance metal-metal low contacts are shown to be obtained when trapping a single metal-coated microsphere in the gap, emphasizing the intrinsic good electrical conductivity of the interconnects, even though a wet process is used. Highly resistive magnetite-based nanoparticles networks also demonstrate the advantage of the high aspect ratio of the nanotrenches for providing access to electrical properties of highly resistive materials, with leakage current levels below 1 pA. © 2010 IOP Publishing Ltd
Voltage-controlled inversion of tunnel magnetoresistance in epitaxial Nickel/Graphene/MgO/Cobalt junctions
We report on the fabrication and characterization of vertical spin-valve
structures using a thick epitaxial MgO barrier as spacer layer and a
graphene-passivated Ni film as bottom ferromagnetic electrode. The devices show
robust and scalable tunnel magnetoresistance, with several changes of sign upon
varying the applied bias voltage. These findings are explained by a model of
phonon-assisted transport mechanisms that relies on the peculiarity of the band
structure and spin density of states at the hybrid graphene|Ni interface
Anisotropic Magneto-Thermopower: the Contribution of Interband Relaxation
Spin injection in metallic normal/ferromagnetic junctions is investigated
taking into account the anisotropic magnetoresistance (AMR) occurring in the
ferromagnetic layer. It is shown, on the basis of a generalized two channel
model, that there is an interface resistance contribution due to anisotropic
scattering, beyond spin accumulation and giant magnetoresistance (GMR). The
corresponding expression of the thermopower is derived and compared with the
expression for the thermopower produced by the GMR. First measurements of
anisotropic magnetothermopower are presented in electrodeposited Ni nanowires
contacted with Ni, Au and Cu. The results of this study show that while the
giant magnetoresistance and corresponding thermopower demonstrates the role of
spin-flip scattering, the observed anisotropic magnetothermopower indicates
interband s-d relaxation mechanisms.Comment: 20 pages, 4 figure
Conductivity in organic semiconductors hybridized with the vacuum field
Organic semiconductors have generated considerable interest for their
potential for creating inexpensive and flexible devices easily processed on a
large scale [1-11]. However technological applications are currently limited by
the low mobility of the charge carriers associated with the disorder in these
materials [5-8]. Much effort over the past decades has therefore been focused
on optimizing the organisation of the material or the devices to improve
carrier mobility. Here we take a radically different path to solving this
problem, namely by injecting carriers into states that are hybridized to the
vacuum electromagnetic field. These are coherent states that can extend over as
many as 10^5 molecules and should thereby favour conductivity in such
materials. To test this idea, organic semiconductors were strongly coupled to
the vacuum electromagnetic field on plasmonic structures to form polaritonic
states with large Rabi splittings ca. 0.7 eV. Conductivity experiments show
that indeed the current does increase by an order of magnitude at resonance in
the coupled state, reflecting mostly a change in field-effect mobility as
revealed when the structure is gated in a transistor configuration. A
theoretical quantum model is presented that confirms the delocalization of the
wave-functions of the hybridized states and the consequences on the
conductivity. While this is a proof-of-principle study, in practice
conductivity mediated by light-matter hybridized states is easy to implement
and we therefore expect that it will be used to improve organic devices. More
broadly our findings illustrate the potential of engineering the vacuum
electromagnetic environment to modify and to improve properties of materials.Comment: 16 pages, 13 figure
Magnetoconductance anisotropy of a polymer thin film at the onset of metallicity
Thin films of poly(2,5-bis(3-dodecyl-2-yl)-thieno[3,2-b] thiophene) (C12-PBTTT) polymer under electrolyte gating and doping are investigated as model systems for organic thin films devices approaching the metallic side of a metal-insulator (M-I) transition. For the most doped samples, with an estimated density reaching 8 x 10(20) cm(-3) holes and a conductivity exceeding 1000 S cm(-1), a positive high-field magnetoconductance is found in a limited temperature range window and only when the field is perpendicular to the sample plane. This signature of weak localization, combined with indications of finite zero-temperature conductivity, allows us to identify delocalized metallic-like transport in these thin films, even though the conductivity decreases when cooling down the samples
Tuning a sign of magnetoelectric coupling in paramagnetic NH2(CH3)2Al1-xCrx(SO4)*6H2O crystals by metal ion substitution
Hybrid organometallic systems offer a wide range of functionalities,
including magnetoelectric interactions. However, the ability to design
on-demand ME coupling remains challenging despite a variety of host-guest
configurations and ME phases coexistence possibilities. Here, we report the
effect of metal-ion substitution on the magnetic and electric properties in the
paramagnetic ferroelectric DMAAS crystals. Doing so we are able to induce and
even tune a sign of the ME interactions in the paramagnetic ferroelectric
state. Both studied samples with 6.5% and 20% of Cr become paramagnetic,
contrary to the initial diamagnetic compound. Due to the isomorphous
substitution with Cr the ferroelectric phase transition temperature increases
nonlinearly, with the shift being larger for the sample with Cr content of
6.5%. A magnetic field applied along the polar c axis increases
ferroelectricity for this sample and shifts Tc to higher values, while inverse
effects are observed for sample containing 20% of Cr. The ME coupling
coefficient of 1.7ns/m found for a crystal with 20% of Cr is among the highest
reported up to now. The observed sign change of ME coupling coefficient with a
small change in Cr content paves the way for ME coupling engineering.Comment: 7 pages, 6 figures. New Organometallic Magnetoelectric and
Ferroelectric compoun
The influence of molecular mobility on the properties of networks of gold nanoparticles and organic ligands
We prepare and investigate two-dimensional (2D) single-layer arrays and multilayered networks of gold nanoparticles derivatized with conjugated hetero-aromatic molecules, i.e., S-(4-{[2,6-bipyrazol-1-yl)pyrid-4-yl]ethynyl}phenyl)thiolate (herein S-BPP), as capping ligands. These structures are fabricated by a combination of self-assembly and microcontact printing techniques, and are characterized by electron microscopy, UVâvisible spectroscopy and Raman spectroscopy. Selective binding of the S-BPP molecules to the gold nanoparticles through AuâS bonds is found, with no evidence for the formation of NâAu bonds between the pyridine or pyrazole groups of BPP and the gold surface. Subtle, but significant shifts with temperature of specific Raman S-BPP modes are also observed. We attribute these to dynamic changes in the orientation and/or increased mobility of the molecules on the gold nanoparticle facets. As for their conductance, the temperature-dependence for S-BPP networks differs significantly from standard alkanethiol-capped networks, especially above 220 K. Relating the latter two observations, we propose that dynamic changes in the molecular layers effectively lower the molecular tunnel barrier for BPP-based arrays at higher temperatures
Increased frequency of anti-Ma2 encephalitis associated with immune checkpoint inhibitors
Objective To report the induction of anti-Ma2 antibody-associated paraneoplastic neurologic syndrome (Ma2-PNS) in 6 patients after treatment with immune checkpoint inhibitors (ICIs). We also analyzed (1) patient clinical features compared with a cohort of 44 patients who developed Ma2-PNS without receiving ICI treatment and (2) the frequency of neuronal antibody detection before and after ICI implementation. Methods Retrospective nationwide study of all patients with Ma2-PNS developed during ICI treatment between 2017 and 2018. Results Our series of patients included 5 men and 1 woman (median age, 63 years). The patients were receiving nivolumab (n = 3), pembrolizumab (n = 2), or a combination of nivolumab and ipilimumab (n = 1) for treatment of neoplasms that included lung (n = 4) and kidney (n = 1) cancers and pleural mesothelioma (n = 1). Clinical syndromes comprised a combination of limbic encephalitis and diencephalitis (n = 3), isolated limbic encephalitis (n = 2), and a syndrome characterized by ophthalmoplegia and head drop (n = 1). No significant clinical difference was observed between our 6 patients and the overall cohort of Ma2-PNS cases. Post-ICI Ma2-PNS accounted for 35% of the total 17 Ma2-PNS diagnosed in our center over the 2017-2018 biennium. Eight cases had been detected in the preceding biennium 2015-2016, corresponding to a 112% increase of Ma2-PNS frequency since the implementation of ICIs in France. Despite ICI withdrawal and immunotherapy, 4/6 patients died, and the remaining 2 showed a moderate to severe disability. Conclusions We show a clear association between ICI use and increased diagnosis of Ma2-PNS. Physicians need to be aware that ICIs can trigger Ma2-PNS because clinical presentation can be challenging