690 research outputs found
CLIC Background Studies and optimization of the innermost tracker elements
The harsh machine background at the Compact Linear Collider (CLIC) forms a
strong constraint on the design of the innermost part of the tracker. For the
CLIC Conceptual Design Report, the detector concepts developed for the
International Linear Collider (ILC) were adapted to the CLIC environment. We
present the new layout for the Vertex Detector and the Forward Tracking Disks
of the CLIC detector concepts, as well as the background levels in these
detectors. We also study the dependence of the background rates on technology
parameters like thickness of the active layer and detection threshold.Comment: 7 pages, 5 figures, LCWS 201
Pixel detector hybridisation with Anisotropic Conductive Films
Hybrid pixel detectors require a reliable and cost-effective interconnect
technology adapted to the pitch and die sizes of the respective applications.
During the ASIC and sensor R&D phase, and in general for small-scale
applications, such interconnect technologies need to be suitable for the
assembly of single-dies, typically available from Multi-Project-Wafer
submissions. Within the CERN EP R&D programme and the AIDAinnova collaboration,
innovative hybridisation concepts targeting vertex-detector applications at
future colliders are under development. This contribution presents recent
results of a newly developed in-house single-die interconnection process based
on Anisotropic Conductive Film (ACF). The ACF interconnect technology replaces
the solder bumps with conductive particles embedded in an adhesive film. The
electro-mechanical connection between the sensor and the read-out chip is
achieved via thermo-compression of the ACF using a flip-chip device bonder. A
specific pad topology is required to enable the connection via conductive
particles and create cavities into which excess epoxy can flow. This pixel-pad
topology is achieved with an in-house Electroless Nickel Immersion Gold (ENIG)
plating process that is also under development within the project. The ENIG and
ACF processes are qualified with the Timepix3 ASIC and sensors, with 55 um
pixel pitch and 14 um pad diameter. The ACF technology can also be used for
ASIC-PCB/FPC integration, replacing wire bonding or large-pitch solder bumping
techniques. This contribution introduces the ENIG plating and ACF processes and
presents recent results on Timepix3 hybrid assemblies
Freezing and chemical preservatives alter the stable isotope values of carbon and nitrogen of the Asiatic clam (Corbicula fluminea)
We tested the impacts of most common sample preservation methods used for aquatic sample materials on the stable isotope ratios of carbon and nitrogen in clams, a typical baseline indicator organism for many aquatic food web studies utilising stable isotope analysis (SIA). In addition to common chemical preservatives ethanol and formalin, we also assessed the potential impacts of freezing on δ¹³C and δ¹⁵N values and compared the preserved samples against freshly dried and analysed samples. All preservation methods, including freezing, had significant impacts on δ¹³C and δ¹⁵N values and the effects in general were greater on the carbon isotope values (1.3-2.2% difference) than on the nitrogen isotope values (0.9-1.0% difference). However, the impacts produced by the preservation were rather consistent within each method during the whole 1 year experiment allowing these to be accounted for, if clams are intended for use in retrospective stable isotope studies
Design and Tests of the Silicon Sensors for the ZEUS Micro Vertex Detector
To fully exploit the HERA-II upgrade,the ZEUS experiment has installed a
Micro Vertex Detector (MVD) using n-type, single-sided, silicon micro-strip
sensors with capacitive charge division. The sensors have a readout pitch of
120 micrometers, with five intermediate strips (20 micrometer strip pitch). The
designs of the silicon sensors and of the test structures used to verify the
technological parameters, are presented. Results on the electrical measurements
are discussed. A total of 1123 sensors with three different geometries have
been produced by Hamamatsu Photonics K.K. Irradiation tests with reactor
neutrons and Co-60 photons have been performed for a small sample of sensors.
The results on neutron irradiation (with a fluence of 1 x 10^{13} 1 MeV
equivalent neutrons / cm^2) are well described by empirical formulae for bulk
damage. The Co-60 photons (with doses up to 2.9 kGy) show the presence of
generation currents in the SiO_2-Si interface, a large shift of the flatband
voltage and a decrease of the hole mobility.Comment: 33 pages, 25 figures, 3 tables, accepted for publication in NIM
Events with Isolated Charged Leptons and Large Missing Transverse Momentum at HERA
Striking events with isolated charged leptons, large missing transverse
momentum and large transverse momentum of the hadronic final state were
observed at the electron proton collider HERA in a data sample corresponding to
a luminosity of about 130 pb-1. The H1 collaboration observed 11 events with
isolated electrons or muons and with transverse momentum above 25 GeV. Only
3.4+-0.6 events were expected from Standard Model (SM) processes. Six of these
events have a transverse momentum of greater than 40 GeV, while 1.3+-0.3 events
were expected. The ZEUS collaboration observed good agreement with the SM.
However, ZEUS found two events with a similar event topology, but tau leptons
instead of electrons or muons in the final state. Only 0.2+-0.05 events were
expected from SM processes. For various hypotheses the compatibility of the
experimental results was investigated with respect to the SM and with respect
to possible explanations beyond the SM. Prospects for the high-luminosity
HERA-II data taking period are given
Beam Test of Silicon Strip Sensors for the ZEUS Micro Vertex Detector
For the HERA upgrade, the ZEUS experiment has designed and installed a high
precision Micro Vertex Detector (MVD) using single sided micro-strip sensors
with capacitive charge division. The sensors have a readout pitch of 120
microns, with five intermediate strips (20 micron strip pitch). An extensive
test program has been carried out at the DESY-II testbeam facility. In this
paper we describe the setup developed to test the ZEUS MVD sensors and the
results obtained on both irradiated and non-irradiated single sided micro-strip
detectors with rectangular and trapezoidal geometries. The performances of the
sensors coupled to the readout electronics (HELIX chip, version 2.2) have been
studied in detail, achieving a good description by a Monte Carlo simulation.
Measurements of the position resolution as a function of the angle of incidence
are presented, focusing in particular on the comparison between standard and
newly developed reconstruction algorithms.Comment: 41 pages, 21 figures, 2 tables, accepted for publication in NIM
Design and characterisation of the CLICTD pixelated monolithic sensor chip
A novel monolithic pixelated sensor and readout chip, the CLIC Tracker Detector (CLICTD) chip, is presented. The CLICTD chip was designed targeting the requirements of the silicon tracker development for the experiment at the Compact Linear Collider (CLIC), and has been fabricated in a modified 180 nm CMOS imaging process with charge collection on a high-resistivity p-type epitaxial layer. The chip features a matrix of 16×128 elongated channels, each measuring 300×30 μm2. Each channel contains 8 equidistant collection electrodes and analog readout circuits to ensure prompt signal formation. A simultaneous 8-bit Time-of-Arrival (with 10 ns time bins) and 5-bit Time-over-Threshold measurement is performed on the combined digital output of the 8 sub-pixels in every channel. The chip has been fabricated in two process variants and characterised in laboratory measurements using electrical test pulses and radiation sources. Results show a minimum threshold between 135 and 180 e‾ and a noise of about 14 e‾ RMS. The design aspects and characterisation results of the CLICTD chip are presented
Measurement of shower development and its Moli\`ere radius with a four-plane LumiCal test set-up
A prototype of a luminometer, designed for a future e+e- collider detector,
and consisting at present of a four-plane module, was tested in the CERN PS
accelerator T9 beam. The objective of this beam test was to demonstrate a
multi-plane tungsten/silicon operation, to study the development of the
electromagnetic shower and to compare it with MC simulations. The Moli\`ere
radius has been determined to be 24.0 +/- 0.6 (stat.) +/- 1.5 (syst.) mm using
a parametrization of the shower shape. Very good agreement was found between
data and a detailed Geant4 simulation.Comment: Paper published in Eur. Phys. J., includes 25 figures and 3 Table
Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter
We present a study of showers initiated by electrons, pions, kaons, and
protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE
scintillator-tungsten analogue hadronic calorimeter. The data were recorded at
the CERN Super Proton Synchrotron in 2011. The analysis includes measurements
of the calorimeter response to each particle type as well as measurements of
the energy resolution and studies of the longitudinal and radial shower
development for selected particles. The results are compared to Geant4
simulations (version 9.6.p02). In the study of the energy resolution we include
previously published data with beam momenta from 1 GeV to 10 GeV recorded at
the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table
- …