Cut-To-Length: The Next Decade

This article discusses the logging system where the logs are made at the stump from a harvester and carried to the landing by a forwarder. The focus is on Sweden, yet with international outlooks. Trends in forestry in the last decades are described and used to envision the next decade. In our analysis we consider the call for sustainable forest management, the demand and supply on the wood market, system productivity and utilisation, as well as operational organisation, operator education, health and safety and technical development. A comparison is made between three mechanised logging methods as well as between three different forest worker education systems. Hindrances found when introducing cut-to-length are operator education, work crew organisation, supply of maintenance service and capital bound in other logging systems. The trend towards purpose built harvesters is discussed. The possibilities following advanced electrohydraulics and GPS/GIS are discussed regarding machine control, maintenance, operational planning and supervision

Time-lapse electrical resistivity tomography of a water infiltration test on Johannishus Esker, Sweden

Managed aquifer recharge (MAR) is an efficient way to remove organic matter from raw water and, at the same time, reduce temperature variation. Two MAR sites were constructed by Karlskrona municipality on Johannishus Esker in Sweden. One of these sites, Vång, was monitored for electrical conductivity and electrical resistivity (using electrical resistivity tomography - ERT) during a 9-week tracer infiltration test. The aim of the monitoring was to map the pathways of the infiltrated water, with the overall goal to increase the efficiency of the MAR. ERT proved useful in determining both the nature of the esker formation and the water migration pathways. In Vång, the esker ridge follows a tectonically controlled paleovalley. The fault/fracture zone in the bedrock along this paleo-valley was mapped. During the tracer test, the infiltrated water was detected in the area close to the infiltration ponds, whereas far-situated observation wells were less affected. For sequential infiltration and recharge periods in MAR, the timing of the well pumping is another important factor. Natural groundwater flow direction was a determinant in the infiltration process, as expected. ERT measurements provide supplementary data for site selection, for monitoring the functionality of the MAR sites, and for revealing the geological, hydrogeological and structural characteristics of the site

Bildning till verklighet och icke-representationell

This paper explores the educational significance of the critique of representationalism. As it includes the notion of non-representational knowledge, Rudolf Steiner’s epistemology is introduced and further linked to elements in Bergson and Deleuze. Humboldt’s idea of Menschenbildung as the central function of knowledge is brought in, since both Humboldt and Steiner emphasise knowledge as mediating the interplay between self and world, producing a deeper sense of reality. Such an education must respect the living nature of genuine concepts as well as the aesthetic aspects of learning. After a note on the educational abuse of language in discursive closures, some traits of Steiner’s practical pedagogy are presented as possible practical implications

Evaluation of the Forsvall biopsy needle in an ex vivo model of transrectal prostate biopsy - a novel needle design with the objective to reduce the risk of post-biopsy infection

Background Transrectal prostate biopsy (TRbx) transfers colonic bacteria into prostatic tissue, potentially causing infectious complications, including sepsis. Our objective was to determine whether biopsy needle shape, surface properties and sampling mechanism affect the number of bacteria transferred through the colon wall, and evaluate a novel needle with improved properties. Methods The standard Tru-Cut biopsy needle used today was evaluated for mechanisms of bacterial transfer in a pilot study. A novel Tru-Cut needle (Forsvall needle prototype) was developed. TRbx was simulated using human colons ex-vivo. Four subtypes of the prototype needle were compared with a standard Tru-Cut needle (BARD 18 G). Prototype and standard needles were used to puncture 4 different colon specimens in 10 randomized sites per colon. Needles were submerged into culture media to capture translocated bacteria. The media was cultured on blood agar and then the total amount of transferred bacteria was calculated for each needle. The primary outcome measure was the percent reduction of bacteria translocated by the prototype needles relative to the standard needle. Secondary outcome measures were the effects of tip design and coating on the percent reduction of translocated bacteria. Results Prototype needles reduced the number of translocated bacteria by, on average, 96.0% (95% confidence interval 93.0-97.7%; p < 0.001) relative to the standard needle. This percent reduction was not significantly affected by prototype needle tip style or surface coating. Conclusions The Forsvall needle significantly reduces colonic bacterial translocation, suggesting that it could reduce infectious complications in prostate biopsy. A clinical trial has been initiated

Mental distress, alcohol use and help-seeking among medical and business students: a cross-sectional comparative study

<p>Abstract</p> <p>Background</p> <p>Stress and distress among medical students are thoroughly studied and presumed to be particularly high, but comparative studies including other student groups are rare.</p> <p>Methods</p> <p>A web-based survey was distributed to 500 medical students and 500 business students. We compared levels of study stress (HESI), burnout (OLBI), alcohol habits (AUDIT) and depression (MDI), and analysed their relationship with self-assessed mental health problems by logistic regression, with respect to gender.</p> <p>Results</p> <p>Medical students' response rate was 81.6% and that of business students 69.4%. Business students scored higher on several study stress factors and on disengagement. Depression (OR 0.61, CI₉₅0.37;0.98) and harmful alcohol use (OR 0.55, CI₉₅0.37; 0.75) were both less common among medical students. However, harmful alcohol use was highly prevalent among male students in both groups (medical students 28.0%, business students 35.4%), and among female business students (25.0%). Mental health problems in need of treatment were equally common in both groups; 22.1% and 19.3%, respectively, and was associated with female sex (OR 2.01, CI₉₅1.32;3.04), exhaustion (OR 2.56, CI₉₅1.60;4.10), lower commitment to studies (OR 1.95, CI₉₅1.09;3.51) and financial concerns (OR 1.81 CI₉₅1.18;2.80)</p> <p>Conclusions</p> <p>Medical students may not be more stressed than other high achieving student populations. The more cohesive structure of medical school and a higher awareness of a healthy lifestyle may be beneficial factors.</p

Quality and productivity in comminution of small-diameter tree bundles

201

Burnout and psychiatric morbidity among medical students entering clinical training: a three year prospective questionnaire and interview-based study

BACKGROUND: Mental distress among medical students is often reported. Burnout has not been studied frequently and studies using interviewer-rated diagnoses as outcomes are rarely employed. The objective of this prospective study of medical students was to examine clinically significant psychiatric morbidity and burnout at 3(rd )year of medical school, considering personality and study conditions measured at 1(st )year. METHODS: Questionnaires were sent to 127 first year medical students who were then followed-up at 3(rd )year of medical school. Eighty-one of 3(rd )year respondents participated in a diagnostic interview. Personality (HP5-i) and Performance-based self-esteem (PBSE-scale) were assessed at first year, Study conditions (HESI), Burnout (OLBI), Depression (MDI) at 1(st )and 3(rd )years. Diagnostic interviews (MINI) were used at 3(rd )year to assess psychiatric morbidity. High and low burnout at 3(rd )year was defined by cluster analysis. Logistic regressions were used to identify predictors of high burnout and psychiatric morbidity, controlling for gender. RESULTS: 98 (77%) responded on both occasions, 80 (63%) of these were interviewed. High burnout was predicted by Impulsivity trait, Depressive symptoms at 1(st )year and Financial concerns at 1(st )year. When controlling for 3(rd )year study conditions, Impulsivity and concurrent Workload remained. Of the interviewed sample 21 (27%) had a psychiatric diagnosis, 6 of whom had sought help. Unadjusted analyses showed that psychiatric morbidity was predicted by high Performance-based self-esteem, Disengagement and Depression at 1(st )year, only the later remained significant in the adjusted analysis. CONCLUSION: Psychiatric morbidity is common in medical students but few seek help. Burnout has individual as well as environmental explanations and to avoid it, organisational as well as individual interventions may be needed. Early signs of depressive symptoms in medical students may be important to address. Students should be encouraged to seek help and adequate facilities should be available

AFM and Multiple Transmission-Reflection Infrared Spectroscopy (MTR-IR) Studies on Formation of Air-Stable Supported Lipid Bilayers

Supported lipid bilayers (SLBs) were prepared by deposition of unilamellar vesicles on a silicon substrate. Atomic force microscopy (AFM) and a new Multiple Transmission-Reflection Infrared Spectroscopy (MTR-IR) developed by us were used to trace the dynamic formation of lipid bilayers on the silicon surfaces. The evolution from deformation of vesicles to formation of bilayers can be distinguished clearly by AFM imaging. MTR-IR provided high quality infrared spectra of ultrathin lipid bilayers with high sensitivity and high signal to noise ratio (SNR). The structural and orientational changes during vesicle’s fusion were monitored with MTR-IR. MTR-IR shows superiority over other infrared approaches for ultrathin films on standard silicon wafers in view of its economy and high sensitivity. Both MTR-IR and AFM results were consistent with each other and they provided more information for understanding the self-assembling procedure of SLBs