3,231 research outputs found
Agglomeration, related-variety and internationalisation. Does a relationship exist?
This paper uses a large sample of Italian manufacturing firms over the period 2004-2006, to investigate whether different types of agglomeration externalities affect firmsâ internationalisation modes. In addition to specialisation economies, Jacobs externalities are analysed following the recent contribution by FRENKEN et al. (2007) which distinguishes between related and unrelated variety. Econometric results show that agglomeration externalities â in particular, specialisation and related-variety â positively affect export, while they do not affect the multinational strategy. Moreover, results show that the impact of agglomeration externalities on firmsâ internationalisation decisions is higher for small sized firms.Agglomeration, externalities, internationalisation
Towards sustainability through energy efficient buildingsâ design: Semantic labels
When designing buildings, it is a challenge to take into account Energy Efficiency in the early design stage. This is especially difficult for hospital designs, because these buildings comprise many different room types and functions. This greatly increases the number of design directions available. Choices made early on in the design process have a large impact on the final performance of the building. However, the lack of detailing available in early designs makes it hard to evaluate them in terms of Key Performance Indicators. The Semantic Labels developed as part of the STREAMER project provide a way to address this problem, by allowing structured capture of the most relevant aspects of the Program of Requirements. Using this method, design rules can be applied to early building designs to detect and correct inconsistencies or suboptimal solutions. Also, using default values for label values, an early design can already be evaluated using simulation tools. The Semantic labels describe standard values for Construction (floor height and strength, accessibility), Hygiene class (from public spaces to operational theatres), Equipment (electric power requirements, safety), User profile (when the room is used), Comfort class (like daylight) and Access security (who can enter). Design rules may express conditions like the preferred spatial separation between rooms, or whether rooms should be placed at outer walls, but may also highlight incompatibilities in e.g. access requirements and user profiles.
The Early Design Configurator, also under development as part of the STREAMER project, uses the Semantic Labels to allow automatic conversion of a Programme of Requirements, into an initial Building Information Modeling (BIM) design proposal that respects the design rules.When designing buildings, it is a challenge to take into account Energy Efficiency in the early design stage. This is especially difficult for hospital designs, because these buildings comprise many different room types and functions. This greatly increases the number of design directions available. Choices made early on in the design process have a large impact on the final performance of the building. However, the lack of detailing available in early designs makes it hard to evaluate them in terms of Key Performance Indicators. The Semantic Labels developed as part of the STREAMER project provide a way to address this problem, by allowing structured capture of the most relevant aspects of the Program of Requirements. Using this method, design rules can be applied to early building designs to detect and correct inconsistencies or suboptimal solutions. Also, using default values for label values, an early design can already be evaluated using simulation tools. The Semantic labels describe standard values for Construction (floor height and strength, accessibility), Hygiene class (from public spaces to operational theatres), Equipment (electric power requirements, safety), User profile (when the room is used), Comfort class (like daylight) and Access security (who can enter). Design rules may express conditions like the preferred spatial separation between rooms, or whether rooms should be placed at outer walls, but may also highlight incompatibilities in e.g. access requirements and user profiles. The Early Design Configurator, also under development as part of the STREAMER project, uses the Semantic Labels to allow automatic conversion of a Programme of Requirements, into an initial Building Information Modeling (BIM) design proposal that respects the design rules
Analysis of the propeller wake evolution by pressure and velocity phase measurements
In the present study an experimental analysis of the velocity and pressure fields behind a marine propeller, in non-cavitating regime is reported. Particle image velocimetry measurements were performed in phase with the propeller angle, to investigate the evolution of the axial and the radial velocity components, from the blade trailing edge up to two diameters downstream. In phase pressure measurements were performed at four radial and eight longitudinal positions downstream the propeller model at different advance ratios. Pressure data, processed by using slotting techniques, allowed reconstructing the evolution of the pressure field in phase with the reference blade position. In addition, the correlation of the velocity and pressure signals was performed. The analysis demonstrated that, within the near wake, the tip vortices passage is the most important contribution in generating the pressure field in the propeller flow. The incoming vortex breakdown process causes a strong deformation of the hub vortex far downstream of the slipstream contraction. This process contributes to the pressure generation at the shaft rate frequency
Sistemi integrati BIM-GIS nella progettazione di edilizia ospedaliera ad alta efficienza energetica
The interoperability of the tools for managing and controlling the design process is one of the themes on which research and innovations are focussed in the field of BIM (Building Information Modelling) systems. A strategic objective of the STREAMER research, co-funded by the European Union within the context of the Seventh Framework Programme, is that of defining the tools and methods of designing hospital buildings that allow for a 50% reduction in energy consumption and emissions in large healthcare districts. Contributing to the achievement of this result is the creation of integrated tools, based on BIM and GIS systems, capable of providing an effective backup to the decisions of the various subjects involved in the project and the management of hospital complexes
Analysis of the propeller wake by pressure and velocity correlation
In the present study an experimental analysis of the velocity and pressure fields behind a marine propeller, in non cavitating regime is reported. Velocity measurements were performed in phase with the propeller angle by using 2D Particle Image Velocimetry (2D-PIV). Measurements were carried out arranging the light sheet along the mid longitudinal plane of the propeller, to investigate the evolution of the axial and the radial velocity components, from the blade trailing edge up to 2 diameters downstream. The pressure measurements were performed at four radial and eight longitudinal positions downstream the propeller model. Measurements of the pressure field were performed at different advance ratios of the propeller. Pressure data, processed by using slotting techniques, allowed to reconstruct the evolution of the pressure field in phase with the reference blade position. In addition, the correlation of the velocity and pressure signals was performed. The analysis demonstrated that, within the near wake, the tip vortices passage is the most important contribution in generating the pressure field in the propeller flow. The incoming vortex breakdown process causes a strong deformation of the hub vortex far downstream the slipstream contraction. This process contributes to the pressure generation at the shaft rate frequency
Advancing the Decarbonization of the Construction Sector: Lifecycle Quality and Performance Assurance of Nearly Zero-Energy Buildings
Dealing with and maintaining high-quality standards in the design and construction phases is challenging, especially for on-site construction. Issues like improper implementation of building components and poor communication can widen the gap between design specifications and actual conditions. To prevent this, particularly for energy-efficient buildings, it isâs vital to develop resili-ent, sustainable strategies. These should optimize resource use, minimize environmental impact, and enhance livability, contributing to carbon neutrality by 2050 and climate change mitigation. Traditional post-occupancy evaluations, which identify defects after construction, are impractical for addressing energy performance gaps. A new, real-time inspection approach is necessary throughout the construction process. This paper suggests an innovative guideline for prefabricated buildings, emphasizing digital âself-instructionâ and âself-inspectionâ. These procedures ensure ac-tivities impacting quality adhere to specific instructions, drawings, and 3D models, incorporating the relevant acceptance criteria to verify completion. This methodology, promoting alignment with planned energy-efficient features, is supported by BIM-based software and Augmented Reality (AR) tools, embodying Industry 4.0 principles. BIM (Building Information Modelling) and AR bridge the gap between virtual design and actual construction, improving stakeholder communication and enabling real-time monitoring and adjustments. This integration fosters accuracy and efficiency, which are key for energy-efficient and nNearly zZero-eEnergy bBuildings, marking a shift towards a more precise, collaborative, and environmentally sensible construction industry
Systems Engineering Solution
The development and realisation of urban infrastructural projects such as bridges is getting increasingly more difficult and complex to manage. The challenge for the actors to develop an effective solution for the project within the traditional dimensions of time, budget and quality is still very present. But society also calls for more sustainable solutions which minimizes an eventual negative impact on the environment and takes into account the interests of stakeholders.
The introduction of national and EU regulated procurement methods such as the Most
Economically Advantageous Tenders (MEAT), has opened the way towards a more active and balanced involvement of actors and stakeholders in the development and realisation of urban construction projects. In this new environment, the client, consultant, contractor and stakeholders strive to work together in order to realise a sustainable solution.
This document describes a methodology for the management of project processes with the aim of achieving a lawful, effective and sustainable construction process. The methodology is based on the principle of Life Cycle Systems Engineering, and facilitates and structures the introduction of sustainability and stakeholders issues in the design and build process. The method uses manly existing guidelines and standards for Life Cycle Systems Engineering
TMJ metastasis: A unusual case report
The metastases to the TMJ from a primary lung tumour is a very rare occurrence
Enhancing Heritage fruition through 3D semantic modelling and digital tools: the INCEPTION project
The INCEPTION project, âInclusive Cultural Heritage in Europe through 3D Semantic Modellingâ, started in June 2015 and lasting four years, aims at developing advanced 3D modelling for accessing and understanding European cultural assets. One of the main challenges of the project is to close the gap between effective user experiences of Cultural Heritage via digital tools and representations, and the enrichment of the scientific knowledge. Within this framework, the INCEPTION project goals are consistently aligned while accomplishing the main objectives of accessing, understanding and strengthening European cultural heritage by means of enriched 3D models. At the end of the third year of activity, the project is now facing different challenging actions starting from already developed advancement in 3D data capturing and holistic digital documentation, under interdisciplinary and cross-cutting fields of knowledge. In this direction, the approach and the methodology for semantic organization and data management toward H-BIM modelling will be presented, as well as a preliminary nomenclature for semantic enrichment of heritage 3D models. According to the overall INCEPTION workflow, the H-BIM modelling procedure starts with documenting user needs, including experts and non-experts. The identification of the Cultural Heritage buildings semantic ontology and data structure for information catalogue will allow the integration of semantic attributes with hierarchically and mutually aggregated 3D digital geometric models for management of heritage information
Le nuove Information and Communication Technologies per la conoscenza e lâaccessibilitĂ del patrimonio culturale. Il progetto INCEPTION - Inclusive Cultural Heritage in Europe through 3D semantic modelling
A un anno dal suo avvio, il progetto âINCEPTION - Inclusive Cultural Heritage in Europe through 3D semantic modellingâ porta al Salone del Restauro le piĂč recenti innovazioni tecnologiche per il rilievo tridimensionale del patrimonio culturale, frutto delle prime attivitĂ di ricerca.
Il progetto, finanziato dalla Commissione Europea nellâambito del Work Programme "Europe in a changing world â inclusive, innovative and reflective Societies" (Call Reflective-7-2014, Advanced 3D modelling for accessing and understanding European cultural assets), a partire da metodologie innovative per il rilievo e la modellazione tridimensionale, si propone di sviluppare nuovi strumenti per lâinteroperabilitĂ e la condivisione inclusiva dei modelli tridimensionali verso nuove forme di accessibilitĂ e conoscenza dellâidentitĂ del patrimonio culturale europeo
- âŠ