2,753 research outputs found
Mechanics of Fracture in Adhesive Joints
Interdependence of continuum mechanics and physical chemistry in failure analysis of adhesive
Vulnerability to Stroke: Implications of Perinatal Programming of the Hypothalamic-Pituitary-Adrenal Axis
Chronic stress is capable of exacerbating each major, modifiable, endogenous risk factor for cerebrovascular and cardiovascular disease. Indeed, exposure to stress can increase both the incidence and severity of stroke, presumably through activation of the hypothalamic-pituitary-adrenal (HPA) axis. Now that characterization of the mechanisms underlying epigenetic programming of the HPA axis is well underway, there has been renewed interest in examining the role of early environment on the evolution of health conditions across the entire lifespan. Indeed, neonatal manipulations in rodents that reduce stress responsivity, and subsequent life-time exposure to glucocorticoids, are associated with a reduction in the development of neuroendocrine, neuroanatomical, and cognitive dysfunctions that typically progress with age. Although improved day to day regulation of the HPA axis also may be accompanied by a decrease in stroke risk, evidence from rodent studies suggest that an associated cost could be increased susceptibility to inflammation and neuronal death in the event that a stroke does occur and the individual is exposed to persistently elevated corticosteroids. Given its importance in regulation of health and disease states, any long-term modulation of the HPA axis is likely to be associated with both benefits and potential risks. The goals of this review article are to examine (1) the clinical and experimental data suggesting that neonatal experiences can shape HPA axis regulation, (2) the influence of stress and the HPA axis on stroke incidence and severity, and (3) the potential for neonatal programming of the HPA axis to impact adult cerebrovascular health
Classification of journal surfaces using surface topography parameters and software methods to compensate for stylus geometry
Measurements made with a stylus surface tracer which provides a digitized representation of a surface profile are discussed. Parameters are defined to characterize the height (e.g., RMS roughness, skewness, and kurtosis) and length (e.g., autocorrelation) of the surface topography. These are applied to the characterization of crank shaft journals which were manufactured by different grinding and lopping procedures known to give significant differences in crank shaft bearing life. It was found that three parameters (RMS roughness, skewness, and kurtosis) are necessary to adequately distinguish the character of these surfaces. Every surface specimen has a set of values for these three parameters. They can be regarded as a set coordinate in a space constituted by three characteristics axes. The various journal surfaces can be classified along with the determination of a proper wavelength cutoff (0.25 mm) by using a method of separated subspace. The finite radius of the stylus used for profile tracing gives an inherent measurement error as it passes over the fine structure of the surface. A mathematical model is derived to compensate for this error
Fracture Mechanics of Joints
Almost every engineering design requires that component members be connected. A disadvantage of mechanical connections such as bolts, screws or rivets is that they do not uniformly distribute the load; hence large local stresses result. This problem can often be reduced ~ joining the members adhesively. Major problems with adhesives that have tended to limit their wider us age include: (1) how the strength of an adhesive and the joint in which it is used can reliably be predicted, and (2) what factors tend to limit the strength of an adhesive joint and how they might be eliminated . It is the intent of the authors to show how fracture mechanics might be used to develop a rational philosophy and methodology that will aid in overcoming these problems
ELEVATED INTRALUMINAL VELOCITIES AFTER SUCCESSFUL RENAL ARTERY STENT INSERTION: IS IT TIME FOR NEW DUPLEX VELOCITY CRITERIA POST-STENTING?
Redefining the patient-carer model at end of life.
CONTEXT: While the patient-carer dyad has been broadly described, there is little exploration of patient-carer models in use. AIM: To explore types of patient-carer models in use for those with advanced and progressive disease. METHODS: Qualitative interviews were undertaken with patients at risk of dying in the next year and their carers across three sites (residential care home, medical assessment unit, general medical unit). Thematic analysis was undertaken. RESULTS: Four patient-carer models were identified. In these, the provision of care and of coordination of care services were important areas and organised differently across the patient, the carer, and alternative sources of support. CONCLUSION: A 'one size fits all' patient-carer model is outdated and a new understanding of different types of patient-carer models are required to fully inform care delivered at end of life
Microscopic Description of Bond Strength Mechanisms and Processes
What we are going to try doing today is look inside some polymeric materials and see what happens on this scale. We are going to look at rather selected polymeric materials since this is the state of the art as we have developed it at this time. I hope at least that it will give you some insight as to what happens on the inside of materials in general. I think as engineers that we have to be interested in this
Epidemiology of coagulase-negative staphylococci intramammary infection in dairy cattle and the effect of bacteriological culture misclassification
Characteristics of hypervelocity impact craters on LDEF experiment S1003 and implications of small particle impacts on reflective surfaces
The Ion Beam textured and coated surfaces EXperiment (IBEX), designated S1003, was flown on LDEF at a location 98 deg in a north facing direction relative to the ram direction. Thirty-six diverse materials were exposed to the micrometeoroid (and some debris) environment for 5.8 years. Optical property measurements indicated no changes for almost all of the materials except S-13G, Kapton, and Kapton-coated surfaces, and these changes can be explained by other environmental effects. From the predicted micrometeoroid flux of NASA SP-8013, no significant changes in optical properties of the surfaces due to micrometeoroids were expected. There were hypervelocity impacts on the various diverse materials flown on IBEX, and the characteristics of these craters were documented using scanning electron microscopy (SEM). The S1003 alumigold-coated aluminum cover tray was sectioned into 2 cm x 2 cm pieces for crater documentation. The flux curve generated from this crater data fits well between the 1969 micrometeoroid model and the Kessler debris model for particles less than 10(exp -9) gm which were corrected for the S1003 positions (98 deg to ram). As the particle mass increases, the S1003 impact data is greater than that predicted by even the debris model. This, however, is consistent with data taken on intercostal F07 by the Micrometeoroid/Debris Special Investigating Group (M/D SIG). The mirrored surface micrometeoroid detector flown on IBEX showed no change in solar reflectance and corroborated the S1003 flux curve, as well as results of this surface flown on SERT 2 and OSO 3 for as long as 21 years
DNA-directed peptide synthesis. 3. Repression of beta-galactosidase synthesis and inhibition of repressor by inducer in a cell-free system.
- …