1,293 research outputs found
Rhodium(I) and Iridium(I) complexes of the conformationally rigid IBioxMe4Ligand : computational and experimental studies of unusually tilted NHC coordination geometries
Computational methods have been used to analyze distorted coordination geometries in a coherent range of known and new rhodium(I) and iridium(I) complexes containing bioxazoline-based NHC ligands (IBiox). Such distortions are readily placed in context of the literature through measurement of the Cnt(NHC)âCNCNâM angle (ÎNHC; Cnt = ring centroid). On the basis of restricted potential energy calculations using cis-[M(IBioxMe4)(CO)2Cl] (M1; M = Rh, Ir), in-plane (yawing) tilting of the NHC was found to incur significantly steeper energetic penalties than orthogonal out-of-plane (pitching) movement, which is characterized by noticeably flat potential energy surfaces. Energy decomposition analysis (EDA) of the ground-state and pitched structures of M1 indicated only minor differences in bonding characteristics. In contrast, yawing of the NHC ligand is associated with a significant increase in Pauli repulsion (i.e., sterics) and reduction in MâNHC Ï back donation, but is counteracted by supplemental stabilizing bonding interactions only possible due to the closer proximity of the methyl substituents with the metal and ancillary ligands. Aided by this analysis, comparison with a range of carefully selected model systems and EDA, distorted coordination modes in trans-[M(IBioxMe4)2(COE)Cl] (M2; M = Rh, Ir) and [M(IBioxMe4)3]+ (M3; M = Rh, Ir) have been rationalized. Steric interactions were identified as the major contributing factor and are associated with a high degree of NHC pitching. In the case of Rh3, weak agostic interactions also contribute to the distortions, particularly with respect to NHC yawing, and are notable for increasing the bond dissociation energy of the distorted ligands. Supplementing the computational analysis, an analogue of the formally 14 VE Rh(I) species Rh3 bearing the cyclohexyl-functionalized IBiox6 ligand ([Rh(IBiox6)3]+, Rh3-Cy) was prepared and found to exhibit an exceptionally distorted NHC ligand (ÎNHC = 155.7(2)°) in the solid state
Aboriginal and Torres Strait Islander Suicide in Context
Aboriginal and Torres Strait Islander suicide has been an issue of national public health and mental health concern for only one decade, having increased dramatically from levels that were very low in the late 1980s to levels of young adult male suicide that are now substantially higher than for the non-indigenous population. In this review the authors socially and historically contextualize these changes, identifying the causal frameworks adopted in developing interventions, and present an explanation in narrative and pictorial form that draws on critical family-centered trauma
Redox-Dependent Stability, Protonation, and Reactivity of Cysteine-Bound Heme Proteins
Cysteine-bound hemes are key components of many enzymes and biological sensors. Protonation (deprotonation) of the Cys ligand often accompanies redox transformations of these centers. To characterize these phenomena, we have engineered a series of Thr78Cys/Lys79Gly/Met80X mutants of yeast cytochrome c (cyt c) in which Cys78 becomes one of the axial ligands to the heme. At neutral pH, the protonation state of the coordinated Cys differs for the ferric and ferrous heme species, with Cys binding as a thiolate and a thiol, respectively. Analysis of redox-dependent stability and alkaline transitions of these model proteins, as well as comparisons to Cys binding studies with the minimalist heme peptide microperoxidase-8, demonstrate that the protein scaffold and solvent interactions play important roles in stabilizing a particular Cysâheme coordination. The increased stability of ferric thiolate compared with ferrous thiol arises mainly from entropic factors. This robust cyt c model system provides access to all four forms of Cys-bound heme, including the ferric thiol. Protein motions control the rates of heme redox reactions, and these effects are amplified at low pH, where the proteins are less stable. Thermodynamic signatures and redox reactivity of the model Cys-bound hemes highlight the critical role of the protein scaffold and its dynamics in modulating redox-linked transitions between thiols and thiolates
Noncovalent Immobilization of Electrocatalysts on Carbon Electrodes for Fuel Production
Low-Spin Heme b3 in the Catalytic Center of Nitric Oxide Reductase from Pseudomonas nautica
Biochemistry, 2011, 50 (20), pp 4251â4262
DOI: 10.1021/bi101605pRespiratory nitric oxide reductase (NOR) was purified from membrane extract of Pseudomonas (Ps.) nautica cells to homogeneity as judged by polyacrylamide gel electrophoresis. The purified protein is a heterodimer with subunits of molecular masses of 54 and 18 kDa. The gene encoding both subunits was cloned and sequenced. The amino acid sequence shows strong homology with enzymes of the cNOR class. Iron/heme determinations show that one heme c is present in the small subunit (NORC) and that approximately two heme b and one non-heme iron are associated with the large subunit (NORB), in agreement with the available data for enzymes of the cNOR class. MoÌssbauer characterization of the as-purified, ascorbate-reduced, and dithionite-reduced enzyme confirms the presence of three heme groups (the catalytic heme b(3) and the electron transfer heme b and heme c) and one redox-active non-heme Fe (Fe(B)). Consistent with results obtained for other cNORs, heme c and heme b in Ps. nautica cNOR were found to be low-spin while Fe(B) was found to be high-spin. Unexpectedly, as opposed to the presumed high-spin state for heme b(3), the MoÌssbauer data demonstrate unambiguously that heme b(3) is, in fact, low-spin in both ferric and ferrous states, suggesting that heme b(3) is six-coordinated regardless of its oxidation state. EPR spectroscopic measurements of the as-purified enzyme show resonances at the g ⌠6 and g ⌠2-3 regions very similar to those reported previously for other cNORs. The signals at g = 3.60, 2.99, 2.26, and 1.43 are attributed to the two charge-transfer low-spin ferric heme c and heme b. Previously, resonances at the g ⌠6 region were assigned to a small quantity of uncoupled high-spin Fe(III) heme b(3). This assignment is now questionable because heme b(3) is low-spin. On the basis of our spectroscopic data, we argue that the g = 6.34 signal is likely arising from a spin-spin coupled binuclear center comprising the low-spin Fe(III) heme b(3) and the high-spin Fe(B)(III). Activity assays performed under various reducing conditions indicate that heme b(3) has to be reduced for the enzyme to be active. But, from an energetic point of view, the formation of a ferrous heme-NO as an initial reaction intermediate for NO reduction is disfavored because heme [FeNO](7) is a stable product. We suspect that the presence of a sixth ligand in the Fe(II)-heme b(3) may weaken its affinity for NO and thus promotes, in the first catalytic step, binding of NO at the Fe(B)(II) site. The function of heme b(3) would then be to orient the Fe(B)-bound NO molecules for the formation of the N-N bond and to provide reducing equivalents for NO reduction
Heightened resistance to host type 1 interferons characterizes HIV-1 at transmission and after antiretroviral therapy interruption
Type 1 interferons (IFN-I) are potent innate antiviral effectors that constrain HIV-1 transmission. However, harnessing these cytokines for HIV-1 cure strategies has been hampered by an incomplete understanding of their antiviral activities at later stages of infection. Here, we characterized the IFN-I sensitivity of 500 clonally derived HIV-1 isolates from the plasma and CD4+ T cells of 26 individuals sampled longitudinally after transmission or after antiretroviral therapy (ART) and analytical treatment interruption. We determined the concentration of IFNα2 and IFNÎČ that reduced viral replication in vitro by 50% (IC50) and found consistent changes in the sensitivity of HIV-1 to IFN-I inhibition both across individuals and over time. Resistance of HIV-1 isolates to IFN-I was uniformly high during acute infection, decreased in all individuals in the first year after infection, was reacquired concomitant with CD4+ T cell loss, and remained elevated in individuals with accelerated disease. HIV-1 isolates obtained by viral outgrowth during suppressive ART were relatively IFN-I sensitive, resembling viruses circulating just before ART initiation. However, viruses that rebounded after treatment interruption displayed the highest degree of IFNα2 and IFNÎČ resistance observed at any time during the infection course. These findings indicate a dynamic interplay between host innate responses and the evolving HIV-1 quasispecies, with the relative contribution of IFN-I to HIV-1 control affected by both ART and analytical treatment interruption. Although elevated at transmission, host innate pressures are the highest during viral rebound, limiting the viruses that successfully become reactivated from latency to those that are IFN-I resistant
Lewis Base Mediated ÎČ-Elimination and Lewis Acid Mediated Insertion Reactions of Disilazido Zirconium Compounds
The reactivity of a series of disilazido zirconocene complexes is dominated by the migration of anionic groups (hydrogen, alkyl, halide, OTf) between the zirconium and silicon centers. The direction of these migrations is controlled by the addition of two-electron donors (Lewis bases) or two-electron acceptors (Lewis acids). The cationic nonclassical [Cp2ZrN(SiHMe2)2]+ ([2]+) is prepared from Cp2Zr{N(SiHMe2)2}H (1) and B(C6F5)3 or [Ph3C][B(C6F5)4], while reactions of B(C6F5)3 and Cp2Zr{N(SiHMe2)2}R (R = Me (3), Et (5), n-C3H7 (7), CHâCHSiMe3 (9)) provide a mixture of [2]+ and [Cp2ZrN(SiHMe2)(SiRMe2)]+. The latter products are formed through B(C6F5)3 abstraction of a ÎČ-H and R group migration from Zr to the ÎČ-Si center. Related ÎČ-hydrogen abstraction and X group migration reactions are observed for Cp2Zr{N(SiHMe2)2}X (X = OTf (11), Cl (13), OMe (15), O-i-C3H7 (16)). Alternatively, addition of DMAP (DMAP = 4-(dimethylamino)pyridine) to [2]+ results in coordination to a Si center and hydrogen migration to zirconium, giving the cationic complex [Cp2Zr{N(SiHMe2)(SiMe2DMAP)}H]+ ([19]+). Related hydrogen migration occurs from [Cp2ZrN(SiHMe2)(SiMe2OCHMe2)]+ ([18]+) to give [Cp2Zr{N(SiMe2DMAP)(SiMe2OCHMe2)}H]+ ([22]+), whereas X group migration is observed upon addition of DMAP to [Cp2ZrN(SiHMe2)(SiMe2X)]+ (X = OTf ([12]+), Cl ([14]+)) to give [Cp2Zr{N(SiHMe2)(SiMe2DMAP)}X]+ (X = OTf ([26]+), Cl ([20]+)). The species involved in these transformations are described by resonance structures that suggest ÎČ-elimination. Notably, such pathways are previously unknown in early metal amide chemistry. Finally, these migrations facilitate direct SiâH addition to carbonyls, which is proposed to occur through a pathway that previously had been reserved for later transition metal compounds
On Predicting Mössbauer Parameters of Iron-Containing Molecules with Density-Functional Theory
The performance of six frequently used density functional theory (DFT) methods (RPBE, OLYP, TPSS, B3LYP, B3LYP*, and TPSSh) in the prediction of Mössbauer isomer shifts(ÎŽ) and quadrupole splittings (ÎEQ) is studied for an extended and diverse set of Fe complexes. In addition to the influence of the applied density functional and the type of the basis set, the effect of the environment of the molecule, approximated with the conducting-like screening solvation model (COSMO) on the computed Mössbauer parameters, is also investigated. For the isomer shifts the COSMO-B3LYP method is found to provide accurate ÎŽ values for all 66 investigated complexes, with a mean absolute error (MAE) of 0.05 mm sâ1 and a maximum deviation of 0.12 mm sâ1. Obtaining accurate ÎEQ values presents a bigger challenge; however, with the selection of an appropriate DFT method, a reasonable agreement can be achieved between experiment and theory. Identifying the various chemical classes of compounds that need different treatment allowed us to construct a recipe for ÎEQ calculations; the application of this approach yields a MAE of 0.12 mm sâ1 (7% error) and a maximum deviation of 0.55 mm sâ1 (17% error). This accuracy should be sufficient for most chemical problems that concern Fe complexes. Furthermore, the reliability of the DFT approach is verified by extending the investigation to chemically relevant case studies which include geometric isomerism, phase transitions induced by variations of the electronic structure (e.g., spin crossover and inversion of the orbital ground state), and the description of electronically degenerate triplet and quintet states. Finally, the immense and often unexploited potential of utilizing the sign of the ÎEQ in characterizing distortions or in identifying the appropriate electronic state at the assignment of the spectral lines is also shown
- âŠ