643 research outputs found
Phase-noise induced limitations on cooling and coherent evolution in opto-mechanical systems
We present a detailed theoretical discussion of the effects of ubiquitous
laser noise on cooling and the coherent dynamics in opto-mechanical systems.
Phase fluctuations of the driving laser induce modulations of the linearized
opto-mechanical coupling as well as a fluctuating force on the mirror due to
variations of the mean cavity intensity. We first evaluate the influence of
both effects on cavity cooling and find that for a small laser linewidth the
dominant heating mechanism arises from intensity fluctuations. The resulting
limit on the final occupation number scales linearly with the cavity intensity
both under weak and strong coupling conditions. For the strong coupling regime,
we also determine the effect of phase noise on the coherent transfer of single
excitations between the cavity and the mechanical resonator and obtain a
similar conclusion. Our results show that conditions for optical ground state
cooling and coherent operations are experimentally feasible and thus laser
phase noise does pose a challenge but not a stringent limitation for
opto-mechanical systems
Quantum feedback cooling of a single trapped ion in front of a mirror
We develop a theory of quantum feedback cooling of a single ion trapped in
front of a mirror. By monitoring the motional sidebands of the light emitted
into the mirror mode we infer the position of the ion, and act back with an
appropriate force to cool the ion. We derive a feedback master equation along
the lines of the quantum feedback theory developed by Wiseman and Milburn,
which provides us with cooling times and final temperatures as a function of
feedback gain and various system parameters.Comment: 15 pages, 11 Figure
BDGS: A Scalable Big Data Generator Suite in Big Data Benchmarking
Data generation is a key issue in big data benchmarking that aims to generate
application-specific data sets to meet the 4V requirements of big data.
Specifically, big data generators need to generate scalable data (Volume) of
different types (Variety) under controllable generation rates (Velocity) while
keeping the important characteristics of raw data (Veracity). This gives rise
to various new challenges about how we design generators efficiently and
successfully. To date, most existing techniques can only generate limited types
of data and support specific big data systems such as Hadoop. Hence we develop
a tool, called Big Data Generator Suite (BDGS), to efficiently generate
scalable big data while employing data models derived from real data to
preserve data veracity. The effectiveness of BDGS is demonstrated by developing
six data generators covering three representative data types (structured,
semi-structured and unstructured) and three data sources (text, graph, and
table data)
Precision radial velocities of double-lined spectroscopic binaries with an iodine absorption cell
A spectroscopic technique employing an iodine absorption cell (I_2) to
superimpose a reference spectrum onto a stellar spectrum is currently the most
widely adopted approach to obtain precision radial velocities of solar-type
stars. It has been used to detect ~80 extrasolar planets out of ~130 know. Yet
in its original version, it only allows us to measure precise radial velocities
of single stars. In this paper, we present a novel method employing an I_2
absorption cell that enables us to accurately determine radial velocities of
both components of double-lined binaries. Our preliminary results based on the
data from the Keck I telescope and HIRES spectrograph demonstrate that 20-30
m/s radial velocity precision can be routinely obtained for "early" type
binaries (F3-F8). For later type binaries, the precision reaches ~10 m/s. We
discuss applications of the technique to stellar astronomy and searches for
extrasolar planets in binary systems. In particular, we combine the
interferometric data collected with the Palomar Testbed Interferometer with our
preliminary precision velocities of the spectroscopic double-lined binary HD
4676 to demonstrate that with such a combination one can routinely obtain
masses of the binary components accurate at least at the level of 1.0%.Comment: Accepted for publication in The Astrophysical Journa
Electric-field noise above a thin dielectric layer on metal electrodes
The electric-field noise above a layered structure composed of a planar metal electrode covered by a thin dielectric is evaluated and it is found that the dielectric film considerably increases the noise level, in proportion to its thickness. Importantly, even a thin (mono) layer of a low-loss dielectric can enhance the noise level by several orders of magnitude compared to the noise above a bare metal. Close to this layered surface, the power spectral density of the electric field varies with the inverse fourth power of the distance to the surface, rather than with the inverse square, as it would above a bare metal surface. Furthermore, compared to a clean metal, where the noise spectrum does not vary with frequency (in the radio-wave and microwave bands), the dielectric layer can generate electric-field noise which scales in inverse proportion to the frequency. For various realistic scenarios, the noise levels predicted from this model are comparable to those observed in trapped-ion experiments. Thus, these findings are of particular importance for the understanding and mitigation of unwanted heating and decoherence in miniaturized ion traps.published_or_final_versio
Reservoir engineering and dynamical phase transitions in optomechanical arrays
We study the driven-dissipative dynamics of photons interacting with an array
of micromechanical membranes in an optical cavity. Periodic membrane driving
and phonon creation result in an effective photon-number conserving non-unitary
dynamics, which features a steady state with long-range photonic coherence. If
the leakage of photons out of the cavity is counteracted by incoherent driving
of the photonic modes, we show that the system undergoes a dynamical phase
transition to the state with long-range coherence. A minimal system, composed
of two micromechanical membranes in a cavity, is studied in detail, and it is
shown to be a realistic setup where the key processes of the driven-dissipative
dynamics can be seen.Comment: 16 pages, 9 figure
Measuring mechanical motion with a single spin
We study theoretically the measurement of a mechanical oscillator using a
single two level system as a detector. In a recent experiment, we used a single
electronic spin associated with a nitrogen vacancy center in diamond to probe
the thermal motion of a magnetized cantilever at room temperature {Kolkowitz et
al., Science 335, 1603 (2012)}. Here, we present a detailed analysis of the
sensitivity limits of this technique, as well as the possibility to measure the
zero point motion of the oscillator. Further, we discuss the issue of
measurement backaction in sequential measurements and find that although
backaction heating can occur, it does not prohibit the detection of zero point
motion. Throughout the paper we focus on the experimental implementation of a
nitrogen vacancy center coupled to a magnetic cantilever; however, our results
are applicable to a wide class of spin-oscillator systems. Implications for
preparation of nonclassical states of a mechanical oscillator are also
discussed.Comment: 17 pages, 6 figure
Force-detected nuclear magnetic resonance: Recent advances and future challenges
We review recent efforts to detect small numbers of nuclear spins using
magnetic resonance force microscopy. Magnetic resonance force microscopy (MRFM)
is a scanning probe technique that relies on the mechanical measurement of the
weak magnetic force between a microscopic magnet and the magnetic moments in a
sample. Spurred by the recent progress in fabricating ultrasensitive force
detectors, MRFM has rapidly improved its capability over the last decade. Today
it boasts a spin sensitivity that surpasses conventional, inductive nuclear
magnetic resonance detectors by about eight orders of magnitude. In this review
we touch on the origins of this technique and focus on its recent application
to nanoscale nuclear spin ensembles, in particular on the imaging of nanoscale
objects with a three-dimensional (3D) spatial resolution better than 10 nm. We
consider the experimental advances driving this work and highlight the
underlying physical principles and limitations of the method. Finally, we
discuss the challenges that must be met in order to advance the technique
towards single nuclear spin sensitivity -- and perhaps -- to 3D microscopy of
molecules with atomic resolution.Comment: 15 pages & 11 figure
Quantitative evaluation of orofacial motor function in mice: The pasta gnawing test, a voluntary and stress-free behavior test
AbstractBackgroundEvaluation of motor deficits in rodents is mostly restricted to limb motor tests that are often high stressors for the animals.New methodTo test rodents for orofacial motor impairments in a stress-free environment, we established the pasta gnawing test by measuring the biting noise of mice that eat a piece of spaghetti. Two parameters were evaluated, the biting speed and the biting peaks per biting episode. To evaluate the power of this test compared to commonly used limb motor and muscle strength tests, three mouse models of Parkinson’s disease, amyotrophic lateral sclerosis and Niemann-Pick disease were tested in the pasta gnawing test, RotaRod and wire suspension test.ResultsOur results show that the pasta gnawing test reliably displays orofacial motor deficits.Comparison with existing methodsThe test is especially useful as additional motor test in early onset disease models, since it shows first deficits later than the RotaRod or wire suspension test. The test depends on a voluntary eating behavior of the animal with only a short-time food deprivation and should thus be stress-free.ConclusionsThe pasta gnawing test represents a valuable tool to analyze orofacial motor deficits in different early onset disease models
- …