22,370 research outputs found
A role for peroxisome proliferator-activated receptors in the immunopathology of schistosomiasis?
Peroxisome proliferator-activated receptors (PPARs) have been demonstrated to have a role in immune regulation. In general, they are anti-inflammatory and promote Th2 type responses, and they are associated with the alternative activation of macrophages. Interestingly, helminth infections, such as the schistosome blood flukes that cause schistosomiasis, are characterised by a Th2 response and the accumulation of alternative activated macrophages. This would suggest that at some level, PPARs could have a role in the modulation of the immune response in schistosomiasis. This paper discusses possible areas where PPARs could have a role in this disease
Hepatic stellate cells and parasite-induced liver fibrosis
ABSTRACT: Fibrogenesis is a common feature of many diseases where there is severe insult to the liver. The hepatic stellate cell trans-differentiation into a myofibroblast has been identified as an important event in liver fibrogenesis and has been well investigated over the last few years in a number of liver diseases. The trans-differentiation process can be monitored in vitro by evaluation of biomarkers that are characteristic of normal quiescent hepatic stellate cells or activated myofibroblasts. Two major parasitic diseases associated with liver injury and fibrosis are schistosomiasis and echinococcosis. Recent studies have highlighted a role for activated hepatic stellate cells in both murine and human schistosomiasis as well as demonstrating that schistosome antigens are able to regulate this trans-differentiation process. Study of the hepatic stellate cell and its interaction with parasite-derived antigens may be pivotal in our understanding of the pathology associated with schistosomiasis and other parasitic diseases, including echinococcosis, as well as revealing new information on the trans-differentiation process in this cell type
Separation and extraction of bridge dynamic strain data (in Chinese)
Through comparing the measured data of dynamic strains due to loading and temperature by the strain gauge and temperature sensor at the same location, the information in the strain data was divided into three parts in the frequency domain by using the defined index named PSD (power spectra density)- ratio. The three parts are dominated respectively by temperature varying, stresses and noises and can be distinguished from the determined values of the separatirix frequencies. Then a simple algorithm was developed to separate the three types of information, and to extract the strain caused mainly by structural stresses. As an application of the proposed method, the influence of strain deformation and noises. As an application of the proposed method, the influence of strain deformation and noises on the fatigue assessment was investigated based on the separated data. The results show that, the determined values of separatrix frequencies are valuable for the monitoring data from other bridges. The algorithm is a multi resolution and hierarchical method, which has been validated as a simple and effective method for data analyses, and is suitable for the compression and pre-processing of the great amount monitoring data and easy to be integrated in the SHM's (structural health monitoring)software system. The strain due to temperature varying attributes only a little to the errors of fatigue assessment. However, the noises or random disturbance existed in the monitoring data have much responsibility for the errors, the main reason is that the random disturbance shifts the real strain/stress amplitude picked up by real structural stress or strain
Kith or Kin? Familiarity as a Cue to Kinship in Social Birds
© Copyright © 2020 Leedale, Li and Hatchwell. Interacting with relatives provides opportunities for fitness benefits via kin-selected cooperation, but also creates potential costs through kin competition and inbreeding. Therefore, a mechanism for the discrimination of kin from non-kin is likely to be critical for individuals of many social species to maximize their inclusive fitness. Evidence suggests that genetic cues to kinship are rare and that learned or environmental cues offer a more parsimonious explanation for kin recognition in most contexts. This is particularly true among cooperatively breeding birds, where recognition of familiar individuals is usually regarded as the most plausible mechanism for kin discrimination. In this article, we first review the evidence that familiarity provides an effective decision rule for discrimination of kin from non-kin in social birds. We then consider some of the complexities of familiarity as a cue to kinship, especially the problems of how individuals become familiar, and how familiar individuals are recognized. We conclude that while familiarity as a mechanism for kin recognition may be more parsimonious and widespread than genetic mechanisms, its apparent simplicity as a decision rule governing social interactions may be deceptive. Finally, we identify directions for future research on familiarity as a kin recognition mechanism in social birds and other taxa
Stokes settling and particle-laden plumes: implications for deep-sea mining and volcanic eruption plumes.
Turbulent buoyant plumes moving through density stratified environments transport large volumes of fluid vertically. Eventually, the fluid reaches its neutral buoyancy level at which it intrudes into the environment. For single-phase plume, the well-known theory of Morton, Taylor and Turner (Morton BR, Taylor GI, Turner JS. 1956 Turbulent gravitational convection from maintained and instantaneous sources. Proc. R. Soc. A 234, 1-23. (doi:10.1098/rspa.1956.0011)) describes the height of the intrusion with great accuracy. However, in multiphase plumes, such as descending particle plumes formed from the surface vessel during deep-sea mining operations, or ascending volcanic plumes, consisting of hot gas and dense ash particles, the sedimentation of particles can change the buoyancy of the fluid very significantly. Even if the plume speed far exceeds the sedimentation speed, the ultimate intrusion height of the fluid may be significantly affected by particle sedimentation. We explore this process, illustrating the phenomena with a series of analogue experiments and some simple modelling, and we discuss the applications in helping to quantify some environmental impacts of deep-sea mining and in helping to assess the eruption conditions leading to the formation of large laterally spreading ash clouds in the atmosphere. This article is part of the theme issue 'Stokes at 200 (part 2)'
Modelling the Interconnected Synchronous Generators and its State Estimations
© 2018 IEEE. In contrast to the traditional centralized power system state estimation approaches, this paper investigates the optimal filtering problem for distributed dynamic systems. Particularly, the interconnected synchronous generators are modeled as a state-space linear equation where sensors are deployed to obtain measurements. As the synchronous generator states are unknown, the estimation is required to know the operating conditions of large-scale power networks. Availability of the system states gives the designer an accurate picture of power networks to avoid blackouts. Basically, the proposed algorithm is based on the minimization of the mean squared estimation error, and the optimal gain is determined by exchanging information with their neighboring estimators. Afterward, the convergence of the developed algorithm is proved so that it can be applied to real-time applications in modern smart grids. Simulation results demonstrate the efficacy of the developed algorithm
Breaking a Guinness World Record on Hand Sanitizing Relay, initiating a call for vital research in overcoming campaign fatigue for hand hygiene
published_or_final_versio
Application and improvement of conventional stress-wave-based non-destructive testing methods for the condition assessment of in-service timber utility poles
Timber utility poles represent a significant part of Australia’s infrastructure for power distribution and communication networks. Due to their advanced age, significant efforts are undertaken to prevent utility lines from failure. However, the lack of reliable tools for assessing the condition of in-service poles seriously jeopardizes the maintenance and asset management. Non-destructive testing (NDT) methods based on stress wave propagation can potentially offer simple and cost-effective tools for the condition assessment of in-service timber poles. Based on the impact direction and location, mainly two wave types can be excited in a pole, i.e. longitudinal and bending waves. A conventional stresswave- based method that analyses longitudinal waves is the Sonic Echo (SE) method; and a typical signal processing method for the analysis of bending waves (BW) is the Short Kernel Method (SKM). In this paper, firstly, the application of the conventional SE method and the BW method with SKM data analysis is investigated for the condition assessment of timber poles from a signal processing perspective. Secondly, to improve limitations of the current methods, the application of a multisensors array is proposed for more reliable and accurate results. The new method is validated on numerical data of a timber pole modelled with both isotropic and orthotropic material properties
Illuminating Choices for Library Prep: A Comparison of Library Preparation Methods for Whole Genome Sequencing of Cryptococcus neoformans Using Illumina HiSeq.
The industry of next-generation sequencing is constantly evolving, with novel library preparation methods and new sequencing machines being released by the major sequencing technology companies annually. The Illumina TruSeq v2 library preparation method was the most widely used kit and the market leader; however, it has now been discontinued, and in 2013 was replaced by the TruSeq Nano and TruSeq PCR-free methods, leaving a gap in knowledge regarding which is the most appropriate library preparation method to use. Here, we used isolates from the pathogenic fungi Cryptococcus neoformans var. grubii and sequenced them using the existing TruSeq DNA v2 kit (Illumina), along with two new kits: the TruSeq Nano DNA kit (Illumina) and the NEBNext Ultra DNA kit (New England Biolabs) to provide a comparison. Compared to the original TruSeq DNA v2 kit, both newer kits gave equivalent or better sequencing data, with increased coverage. When comparing the two newer kits, we found little difference in cost and workflow, with the NEBNext Ultra both slightly cheaper and faster than the TruSeq Nano. However, the quality of data generated using the TruSeq Nano DNA kit was superior due to higher coverage at regions of low GC content, and more SNPs identified. Researchers should therefore evaluate their resources and the type of application (and hence data quality) being considered when ultimately deciding on which library prep method to use
Resonant Josephson current through a quantum dot
We calculate the DC Josephson current through a semiconducting quantum dot
which is weakly coupled by tunnel barriers to two superconducting reservoirs. A
Breit-Wigner resonance in the conductance corresponds to a resonance in the
critical current, but with a different (non-lorentzian) lineshape.Comment: 5 pages including 1 figure; this paper was published in the
proceedings of SQUID'91; it is archived here because of its relevance to
cond-mat/011148
- …