158 research outputs found
Thermal stability and long term hydrogen/deuterium release from soft to hard amorphous carbon layers analyzed using in-situ Raman spectroscopy. Comparison with Tore Supra deposits
The thermal stability of 200 nm thick plasma enhanced chemical vapor
deposited a-C:H and a-C:D layers ranging from soft to hard layers has been
studied and compared to that of deposits collected on the Tore Supra tokamak
plasma facing components by means of in-situ Raman spectroscopy. Linear ramp
heating and long term isotherms (from several minutes to 21 days) have been
performed and correlations between spectrometric parameters have been found.
The information obtained on the sp 2 clustering has been investigated by
comparing the G band shift and the 514 nm photon absorption evolution due to
the thermal treatment of the layer. The effects of isotopic substitution have
also been investigated.Comment: appears in Thin Solid Films, Elsevier, 201
An innovative approach for DEMO core fuelling by inboard injection of high-speed pellets
Core fuelling of DEMO tokamak fusion reactor is under investigation within the EUROfusion Work Package “Tritium, Fuelling and Vacuum”. An extensive analysis of fuelling requirements and technologies, suggests that pellet injection still represents, to date, the most realistic option. Modelling of both pellet penetration and fuel deposition profiles for different injection locations, assuming a specific plasma reference scenario and the ITER reference pellet mass (6 × 1021 atoms), indicates that: 1) Low Field Side (LFS) injection is inadequate; 2) Vertical injection may be effective only provided that pellets are injected at ∼ 10 km/s from a radial position ≤∼8 m; 3) effective core fuelling can be achieved launching pellets from the High Field Side (HFS) at ∼1 km/s. HFS injection was therefore selected as the reference scheme, though scenarios featuring less steep density and temperature gradients at the plasma edge could induce to reconsider vertical injection at speeds in the range of 4–5 km/s. To deliver intact pellets at 1 km/s from the HFS, the use of guide tubes with a bend radius ≥6 m is envisaged. The results of above simulations rely on the hypothesis that pellets are delivered at the plasma edge with the desired mass and speed. However, mass erosion and fracturing of pellets inside the guide tube (severely limiting the transfer speed), as well as pressure build up and speed losses at relevant injection rates, might hamper the use of curved guide tubes. An additional innovative approach, aimed at identifying inboard straight “free flight” injection paths, to inject pellets from the HFS at significantly higher speeds, is proposed and discussed as a backup solution. Outboard high-speed injection is still being considered, instead, for JT-60SA
Proposal of a control scheme for testing a centrifuge-based pellet injection system in DIPAK-PET
Matter Injection in EU-DEMO: The Preconceptual Design
EU-DEMO will be the next step in Europe after ITER on the path toward a fusion power plant. The matter injection systems have to provide the requested material in order to establish, maintain, and terminate the burning plasma. Their main function is to fuel the plasma, but other tasks are addressed as well like delivering matter for generating sufficient core radiation and divertor buffering. In the preconceptual design phase performed from 2014 to 2020, the matter injection systems, in particular pellet injection and gas injection, have been assessed. This work describes the main findings and state of the art of the matter injection systems at the transition from the preconceptual design phase to the conceptual design phase
Comparison between carbon dust produced in laboratory plasmas and in Tore Supra
12th International Congress on Plasma Physics, 25-29 October 2004, Nice (France)Laboratory experiments are proposed to understand the growth mechanisms of spherical carbonaceous dust observed in Tokamaks with inside wall elements in graphite materials. The sputtering process is used to form continuous carbon vapours. Their cooling in the plasmas gives rise to carbon clusters which size goes increasing with time. In the nanometer scale range, the obtained primary particles are spherical. They can also agglomerate in the plasma likely by coulomb attraction and form spherical aggregates of higher size. A comparison between the carbon structure of these dust grains and of some dust samples collected on the toroïdal pumped limiter surface of Tore Supra is also proposed. The differences are discussed
Long Term H-Release from Amorphous Carbon Evidenced by in Situ Raman Microscopy under Isothermal Heating
We study the kinetics of the H release from plasma-deposited hydrogenated
amorphous carbon films under isothermal heating at 450, 500 and 600 {\degree}C
for long times up to several days using in situ Raman microscopy. Four Raman
parameters are analyzed. They allow the identification of different processes
such as the carbon network reorganization and the H release from sp3 or sp2
carbon atoms and the corresponding timescales. Carbon reorganization with
aromatization and loss of sp3 hybridization occurs first in 100 minutes at 500
{\degree}C. The final organization is similar at all investigated temperatures.
Full H release from sp3 carbon occurs on a longer timescale of about 10 hours
while H release from sp2 carbon atoms is only partial, even after several days.
All these processes occur more rapidly with higher initial H content, in
agreement with what is known about the stability of these types of films. A
quantitative analysis of these kinetics studies gives valuable information
about the microscopic processes at the origin of the H release through the
determination of activation energies
Dynamic modelling of local fuel inventory and desorption in the whole tokamak vacuum vessel for auto-consistent plasma-wall interaction simulations
An extension of the SolEdge2D-EIRENE code package, named D-WEE, has been developed to add the dynamics of thermal desorption of hydrogen isotopes from the surface of plasma facing materials. To achieve this purpose, D-WEE models hydrogen isotopes implantation, transport and retention in those materials. Before launching auto-consistent simulation (with feedback of D-WEE on SolEdge2D-EIRENE), D-WEE has to be initialised to ensure a realistic wall behaviour in terms of dynamics (pumping or fuelling areas) and fuel content. A methodology based on modelling is introduced to perform such initialisation. A synthetic plasma pulse is built from consecutive SolEdge2D-EIRENE simulations. This synthetic pulse is used as a plasma background for the D-WEE module. A sequence of plasma pulses is simulated with D-WEE to model a tokamak operation. This simulation enables to extract at a desired time during a pulse the local fuel inventory and the local desorption flux density which could be used as initial condition for coupled plasma-wall simulations. To assess the relevance of the dynamic retention behaviour obtained in the simulation, a confrontation to post-pulse experimental pressure measurement is performed. Such confrontation reveals a qualitative agreement between the temporal pressure drop obtained in the simulation and the one observed experimentally. The simulated dynamic retention during the consecutive pulses is also studied.EURATOM 63305
- …