Label-free plasmonic biosensor for rapid, quantitative, and highly sensitive COVID-19 serology: implementation and clinical validation

Serological tests are essential for the control and management of COVID-19 pandemic, not only for current and historical diagnostics but especially for surveillance, epidemiological, and acquired immunity studies. Clinical COVID-19 serology is routinely performed by enzymatic or chemiluminescence immunoassays (i.e., ELISA or CLIA), which provide good sensitivities at the expense of relatively long turnaround times and specialized laboratory settings. Rapid serological tests, based on lateral flow assays, have also been developed and widely commercialized, but they suffer from limited reliability due to relatively low sensitivity and specificity. We have developed and validated a direct serological biosensor assay employing proprietary technology based on Surface Plasmon Resonance (SPR). The biosensor offers a rapid -less than 15 min- identification and quantification of SARS-CoV-2 antibodies directly in clinical samples, without the need of any signal amplification. The portable plasmonic biosensor device employs a custom-designed multi-antigen sensor biochip, combining the two main viral antigens (RBD peptide and N protein), for simultaneous detection of human antibodies targeting both antigens. The SPR serology assay reaches detection limits in the low ng mL-1 range employing polyclonal antibodies as standard, which are well below the commonly detected antibody levels in COVID-19 patients. The assay has also been implemented employing the first WHO approved anti-SARS-CoV-2 immunoglobulin standard. We have carried out a clinical validation with COVID-19 positive and negative samples (n=120) that demonstrates the excellent diagnostic sensitivity (99%) and specificity (100%). This positions our biosensor device as an accurate, robust, and easy-to-use diagnostics tool for rapid and reliable COVID-19 serology to be employed both at laboratory and decentralized settings for the management of COVID-19 patients and for the evaluation of immunological status during vaccination, treatment or in front of emerging variants.H2020 Research and Innovation Programme of the European Commission Project, No. 101003544 Spanish Research Agency (AEI, grant no. SEV-2017-0706AEI, grant no. SEV-2017-0706) Spanish Ministry of Science and Innovation and the Spanish Research Agency and the European Social Fund (ESF)BES-2017-080527 GENCAT-DGRIS COVID EU H2020 Programme (644956) Plan Nacional de I+D+i 2013-2016 ISCIII- Ministerio de Ciencia e Innovación, Vall d’Hebron University Hospital Biobank PT17/0015/0047 European Virus Archive GLOBAL (EVA-GLOBAL) EU Horizon 2020 (grant agreement No. 871029) Fundació Glòria Soler for COVIDBANK collection Spanish Network for Research in Infectious Diseases (REIPI RD16/0016/0003)N

Supporting information Label-Free Plasmonic Biosensor for Rapid, Quantitative, and Highly Sensitive COVID-19 Serology: Implementation and Clinical Validation

15 pages. -- Content: 1. Supplementary text: 1.1.Chemical and biological reagents; 1.2.SPR biosensor device; 1.3.Plasmonic sensor chip preparation; 1.4.Clinical samples collection; 1.5.Stratification of convalescent COVID patients. Samples collection from Clinic Hospital (Barcelona); 1.6. Standard analytical techniques (ELISA, CLIA and LFA); 1.7.Data analysis; 1.8.Diagnostic sensitivity and specificity. -- 2. Figures. -- Tables S1-S3. -- References.Serological tests are essential for the control and management of COVID-19 pandemic (diagnostics and surveillance, and epidemiological and immunity studies). We introduce a direct serological biosensor assay employing proprietary technology based on plasmonics, which offers rapid (<15 min) identification and quantification of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibodies in clinical samples, without signal amplification. The portable plasmonic device employs a custom-designed multiantigen (RBD peptide and N protein) sensor biochip and reaches detection limits in the low ng mL–1 range employing polyclonal antibodies. It has also been implemented employing the WHO-approved anti-SARS-CoV-2 immunoglobulin standard. A clinical validation with COVID-19 positive and negative samples (n = 120) demonstrates its excellent diagnostic sensitivity (99%) and specificity (100%). This positions our biosensor as an accurate and easy-to-use diagnostics tool for rapid and reliable COVID-19 serology to be employed both at laboratory and decentralized settings for the disease management and for the evaluation of immunological status during vaccination or treatment.Peer reviewe

Structure and oligomerization state of the C-terminal region of the Middle East respiratory syndrome coronavirus nucleoprotein

International audienceMiddle East respiratory syndrome coronavirus (MERS-CoV) is a human pathogen responsible for a severe respiratory illness that emerged in 2012. Structural information about the proteins that constitute the viral particle is scarce. In order to contribute to a better understanding of the nucleoprotein (N) in charge of RNA genome encapsidation, the structure of the C-terminal domain of N from MERS-CoV obtained using single-crystal X-ray diffraction is reported here at 1.97 Å resolution. The molecule is present as a dimer in the crystal structure and this oligomerization state is confirmed in solution, as measured by additional methods including small-angle X-ray scattering measurements. Comparisons with the structures of the C-terminal domains of N from other coronaviruses reveals a high degree of structural conservation despite low sequence conservation, and differences in electrostatic potential at the surface of the protein

High specificity and sensitivity of Zika EDIII-based ELISA diagnosis highlighted by a large human reference panel

International audienceBACKGROUND:Zika virus (ZIKV) and Dengue virus (DENV) are often co-endemic. The high protein-sequence homology of flaviviruses renders IgG induced by and directed against them highly cross-reactive against their antigen(s), as observed on a large set of sera, leading to poorly reliable sero-diagnosis.METHODS:We selected Domain III of the ZIKV Envelope (ZEDIII) sequence, which is virus specific. This recombinant domain was expressed and purified for the specific detection of ZEDIII-induced IgG by ELISA from ZIKV-RT-PCR-positive, ZIKV-IgM-positive, flavivirus-positive but ZIKV-negative, or flavivirus-negative sera. We also assessed the reactivity of ZEDIII-specific human antibodies against EDIII of DENV serotype 4 (D4EDIII) as a specific control. Sera from ZEDIII-immunized mice were also tested.RESULTS:Cross-reactivity of IgG from 5,600 sera against total inactivated DENV or ZIKV was high (71.0% [69.1; 72.2]), whereas the specificity and sensitivity calculated using a representative cohort (242 sera) reached 90% [84.0; 95.8] and 92% [84.5; 99.5], respectively, using a ZEDIII-based ELISA. Moreover, purified human IgG against D2EDIII or D4EDIII did not bind to ZEDIII and we observed no D4EDIII reactivity with ZIKV-induced mouse polyclonal IgGs.CONCLUSIONS:We developed a ZEDIII-based ELISA that can discriminate between past or current DENV and ZIKV infections, allowing the detection of a serological scar from other flaviviruses. This could be used to confirm exposure of pregnant women or to follow the spread of an endemic disease

Label-Free Plasmonic Biosensor for Rapid, Quantitative, and Highly Sensitive COVID-19 Serology : Implementation and Clinical Validation

Serological tests are essential for the control and management of COVID-19 pandemic (diagnostics and surveillance, and epidemiological and immunity studies). We introduce a direct serological biosensor assay employing proprietary technology based on plasmonics, which offers rapid (<15 min) identification and quantification of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibodies in clinical samples, without signal amplification. The portable plasmonic device employs a custom-designed multiantigen (RBD peptide and N protein) sensor biochip and reaches detection limits in the low ng mL -1 range employing polyclonal antibodies. It has also been implemented employing the WHO-approved anti-SARS-CoV-2 immunoglobulin standard. A clinical validation with COVID-19 positive and negative samples (n = 120) demonstrates its excellent diagnostic sensitivity (99%) and specificity (100%). This positions our biosensor as an accurate and easy-to-use diagnostics tool for rapid and reliable COVID-19 serology to be employed both at laboratory and decentralized settings for the disease management and for the evaluation of immunological status during vaccination or treatment

Label-Free Plasmonic Biosensor for Rapid, Quantitative, and Highly Sensitive COVID-19 Serology: Implementation and Clinical Validation

Serological tests are essential for the control and management of COVID-19 pandemic, not only for current and historical diagnostics but especially for surveillance, epidemiological, and acquired immunity studies. Clinical COVID-19 serology is routinely performed by enzymatic or chemiluminescence immunoassays (i.e., ELISA or CLIA), which provide good sensitivities at the expense of relatively long turnaround times and specialized laboratory settings. Rapid serological tests, based on lateral flow assays, have also been developed and widely commercialized, but they suffer from limited reliability due to relatively low sensitivity and specificity. We have developed and validated a direct serological biosensor assay employing proprietary technology based on Surface Plasmon Resonance (SPR). The biosensor offers a rapid -less than 15 min- identification and quantification of SARS-CoV-2 antibodies directly in clinical samples, without the need of any signal amplification. The portable plasmonic biosensor device employs a custom-designed multi-antigen sensor biochip, combining the two main viral antigens (RBD peptide and N protein), for simultaneous detection of human antibodies targeting both antigens. The SPR serology assay reaches detection limits in the low ng mL-1 range employing polyclonal antibodies as standard, which are well below the commonly detected antibody levels in COVID-19 patients. The assay has also been implemented employing the first WHO approved anti-SARS-CoV-2 immunoglobulin standard. We have carried out a clinical validation with COVID-19 positive and negative samples (n=120) that demonstrates the excellent diagnostic sensitivity (99%) and specificity (100%). This positions our biosensor device as an accurate, robust, and easy-to-use diagnostics tool for rapid and reliable COVID-19 serology to be employed both at laboratory and decentralized settings for the management of COVID-19 patients and for the evaluation of immunological status during vaccination, treatment or in front of emerging variants.<br /