Abrasive fluidized bed finishing to improve the fatigue behaviour of Ti6Al4V parts fabricated by electron beam melting

A study of the abrasive fluidized bed (AFB) finishing process was conducted to quantify the obtainable improvement of the fatigue behaviour of Ti6Al4V parts produced by electron beam melting (EBM). Axial-symmetric EBM samples were rotated at high speed inside a fluidized bed of stainless-steel media. The effects of the treatment time and the rotational speed on morphological features and fatigue life of the EBM samples were investigated. Outcomes showed that the improvement in surface properties induced by the AFB finishing process determined an increase up to 50% in fatigue life and a shift of the S-N curve

Resistant Cases of Psoriatic Arthritis: How to Manage Them

n/

Managing polyglot systems metadata with hypergraphs

A single type of data store can hardly fulfill every end-user requirements in the NoSQL world. Therefore, polyglot systems use different types of NoSQL datastores in combination. However, the heterogeneity of the data storage models makes managing the metadata a complex task in such systems, with only a handful of research carried out to address this. In this paper, we propose a hypergraph-based approach for representing the catalog of metadata in a polyglot system. Taking an existing common programming interface to NoSQL systems, we extend and formalize it as hypergraphs for managing metadata. Then, we define design constraints and query transformation rules for three representative data store types. Furthermore, we propose a simple query rewriting algorithm using the catalog itself for these data store types and provide a prototype implementation. Finally, we show the feasibility of our approach on a use case of an existing polyglot system.Peer ReviewedPostprint (author's final draft

A Review of Heat Treatments on Improving the Quality and Residual Stresses of the Ti–6Al–4V Parts Produced by Additive Manufacturing

Additive manufacturing (AM) can be seen as a disruptive process that builds complex components layer upon layer. Two of its distinct technologies are Selective Laser Melting (SLM) and Electron Beam Melting (EBM), which are powder bed fusion processes that create metallic parts with the aid of a beam source. One of the most studied and manufactured superalloys in metal AM is the Ti–6Al–4V, which can be applied in the aerospace field due to its low density and high melting point, and in the biomedical area owing to its high corrosion resistance and excellent biocompatibility when in contact with tissues or bones of the human body. The research novelty of this work is the aggregation of all kinds of data from the last 20 years of investigation about Ti–6Al–4V parts manufactured via SLM and EBM, namely information related to residual stresses (RS), as well as the influence played by different heat treatments in reducing porosity and increasing mechanical properties. Throughout the report, it can be seen that the expected microstructure of the Ti–6Al–4V alloy is different in both manufacturing processes, mainly due to the distinct cooling rates. However, heat treatments can modify the microstructure, reduce RS, and increase the ductility, fatigue life, and hardness of the components. Furthermore, distinct post-treatments can induce compressive RS on the part’s surface, consequently enhancing the fatigue lifeinfo:eu-repo/semantics/publishedVersio

Modelling Analytically the Dynamic Response of Thermo-Optic Phase Shifters

Thermo-optic phase shifters are widely adopted to achieve dynamical reconfiguration of integrated waveguide circuits [1], with applications encompassing diverse fields, ranging from free-space beam steering and shaping [2] to quantum information experiments [3]

A New Configuration of Vertical Axis Wind Turbine: Towards the Development of a highly distributed and efficient Wind Power Generation

Preliminary results obtained for a new configuration lift based vertical-axis wind turbine are shown. The turbine rotor is a cross flow fan type made with high curvature aerodynamic profiles. A reduced scale model of the turbine rotor has been designed and preliminary tested at the Department of Aerospace Engineering of the University of Pisa (rotor diameter 250 mm, rotor height 210 mm). The reduced scale model shows an efficiency of about eighteen per cent. The rotor is of a self-starting type. Two-dimensional CFD analyses have been performed applying both the Moving Reference Frame and the Moving Mesh conditions to the grid which surrounds the rotor blades (Fluent® Rel. 6.3 and STAR-CCM+® Rel. 6.04 have been used). Noticeable scale effects have been found numerically, so, the efficiency of a full scale lift based vertical axis multi-blades optimized wind turbine is expected to be comparable with lift based horizontal-axis wind turbines

A review of heat treatments on improving the quality and residual stresses of the Ti–6Al–4V parts produced by additive manufacturing

Additive manufacturing (AM) can be seen as a disruptive process that builds complex components layer upon layer. Two of its distinct technologies are Selective Laser Melting (SLM) and Electron Beam Melting (EBM), which are powder bed fusion processes that create metallic parts with the aid of a beam source. One of the most studied and manufactured superalloys in metal AM is the Ti–6Al–4V, which can be applied in the aerospace field due to its low density and high melting point, and in the biomedical area owing to its high corrosion resistance and excellent biocompatibility when in contact with tissues or bones of the human body. The research novelty of this work is the aggregation of all kinds of data from the last 20 years of investigation about Ti–6Al–4V parts manufactured via SLM and EBM, namely information related to residual stresses (RS), as well as the influence played by different heat treatments in reducing porosity and increasing mechanical properties. Throughout the report, it can be seen that the expected microstructure of the Ti–6Al–4V alloy is different in both manufacturing processes, mainly due to the distinct cooling rates. However, heat treatments can modify the microstructure, reduce RS, and increase the ductility, fatigue life, and hardness of the components. Furthermore, distinct post-treatments can induce compressive RS on the part’s surface, consequently enhancing the fatigue life

Artrite reumatoide all’esordio = Early rheumatoid arthritis

Rheumatoid arthritis (RA) is a systemic disease characterized by chronic inflammation of the synovial joints damage and loss of the function. The ultimate goal in managing RA is to prevent joint damage and to maintain functional ability. Consequently, early diagnosis and treatment is important, but predictive markers for RA are still confined to autoantibodies and also magnetic resonance imaging (MRI) and sonography do not appear to sufficiently distinguish between early RA and non RA. Evidence shows that substantial and irreversible joint damage already occurs within the first 2 years after disease onset. This "window of opportunity" hypothesis for therapeutic intervention in RA is based on the existence of a time frame within which there is a potential for a greater response to therapy, resulting in sustained benefits or, perhaps most important, a chance of cure. There is increasing evidence for beneficial effects of early DMARDs (disease-modifying anti-rheumatic drugs) therapy over delayed treatment in patients who present with arthritis of recent onset. However, no universal consensus exists concerning the choice of initial drug or whether single drug or combination should be given as initial treatments. Most studies demonstrated superiority of aggressive over conventional approaches. Because the tumor necrosis factor (TNF)-alpha inhibitors have proved to stop joint damage progression in severe progressive RA, the achievement of these agents in early RA are currently of great interest

Noninvasive imaging methods for evaluating cardiovascular involvement in patients with rheumatoid arthritis before and after anti-TNF drug treatment

Aim: To use 2D speckle-tracking echocardiography, and conventional and tissue Doppler echocardiography to detect subclinical left ventricular myocardial dysfunction in patients with rheumatoid arthritis (RA). Methods: Thirty RA outpatients were assessed before and after 18 months of treatment with antiTNF drugs, along with 30 healthy controls. Cardiovascular risk was assessed by means of ultrasound carotid assessment and comprehensive echocardiographic evaluation (conventional and speckle-tracking calculation). Results: The speckle-tracking analyses were significantly different between the two groups, with global longitudinal strain deformation in the apical four-chamber view being significantly lower in the RA patients (median: 18.78%, interquartile range [IQR]: 15.80-20.82% vs 20.16%, IQR: 19.03-21.89%; [p <0.05]). After 18 months of biological treatment, global longitudinal strain showed a significant improvement (18.78%, IQR: 15.80-20.82 vs 19.24%, IQR: 18.23-19.98; [p < 0.01]), such as for DAS28 (4.80, IQR: 4.65-5.22 vs 2.78; IQR: 2.52-2.99; [p < 0.01]). Conclusion: Speckle-tracking echocardiography showed that left ventricular myocardial longitudinal strain was impaired in the RA patients. Lay abstract: The different structures of the heart may be affected by rheumatoid arthritis (RA)-related inflammation, with the most frequent lesion being conduction defects, followed by pericarditis, cardiomyopathy and valve disease. We demonstrated, in a study involving 30 RA patients and using speckle-tracking echocardiography, that left ventricular myocardial longitudinal strain was impaired in the RA patients, in the absence of any clinical or other echocardiographic evidence of cardiovascular disease. The results suggest that inflammation is associated with myocardial alteration, as it returns to healthy controls levels upon therapy with anti-TNF drugs