48 research outputs found
Image Processing and Biometrical Investigations for Choosing the Most Ranked Rice Cultivars
Rice (Oryza sativa L.) is one of the vital food staples in our daily life, amongst the oldest cultivated crops worldwide, ranks as the most widely grown crop. It serves as a vital nutritional material to more than half of the world increasing crowd. This experiment was conducted for evaluation and selection of the most ranked rice cultivars: Kamfirooz, Yasouj, Dom Siah, Gharib, Dollar, Hassan saraei, 304, Lenjan, and Musa Tarom (MTA) as the well-known and prevalent varieties in the 'Fars' and 'Kogilouyeh-o-BoyreAhmad' provinces, Iran, along with other countries. Rough rice grains of the varieties were randomly selected and their principal dimensions were imaged using camera and a special box for light controlling and including Perimeter, Area, MajorAxis Length, MinorAxis Length, Solidity, Eccentricity, and Equiv Diameter, following with image analyzing by image processing software, in a labratroy experiment. The data were statistically analyzed and graphically plotted using SPSS v.17 and MINITAB v.16 software programs. The results of the image analysis indicated that there were significantly differences between most cultivars in the case of physical traits. The cluster categorization of the cultivars showed also that 9 cultivars clustered in 5 groups, i.e. Yasouj and Lenjan cultivars were located in different groups individually, where cultivars: Kamfirrooz, Dom Siah and Dollar in a unique cluster, but Gharib and 304 in the 4th group and MTA and Hassan Saraei in the 5th group. The results of this experiment showed the separateness of rice most recent cultivars according to agronomic and physical status, and leads to picking the most valuable cultivars for upcoming food nutritional values and also experiment
Classification of Pomegranate Fruit using Texture Analysis of MR Images
Images obtained by Magnetic Resonance Imaging (MRI) of Iranian important export cultivar of pomegranate Malase-e-Torsh were analyzed by texture analysis to determine Gray Level Co-occurrence Matrix (GLCM) and Pixel Run-Length Matrix (PRLM) parameters. The T2 slices measured at 1.5 T for 4 quality classes of pomegranate semi-ripe, ripe, over-ripe and internal defects classes were analyzed numerically using the software MaZda. To classify pomegranate into different classes, discriminant analysis was conducted using cross-validation method and texture features. Ten GLCM and 5 PRLM features were used in 2 different classifiers. Mean classification accuracy was 95.75 % and 91.28 % for GLCM and PRLM features respectively. By using GLCM and RPLM features, classification accuracy for semi-ripe, over-ripe and internal defects classes was higher when GLCM features were used. Ripe class had higher classification accuracy while PRLM features were used. To improve classification accuracy, combination of GLCM and PRLM features were used. For achieving best classification accuracy, optimum numbers of features were selected based on their contribution to the model. Combination of 7 GLCM and 4 PRLM features resulted in mean accuracy of 98.33 % and the lowest type I and II errors. Especially, type I error in ripe and over-ripe classes were significantly decreased. The classification accuracies were 100, 98.47, 100 and 95 % for semi-ripe, ripe, over-ripe and internal defects classes
Electrochemical determination of the antipsychotic medication clozapine by a carbon paste electrode modified with a nanostructure prepared from titania nanoparticles and copper oxide
A nanostructure was prepared from titania nanoparticles and copper oxide (TiO2NP@CuO) and used to modify a carbon paste electrode (CPE). The modified CPE is shown to enable sensitive voltammetric determination of the drug clozapine (CLZ). The sensor was characterized by various techniques and some key parameters were optimized. Under the optimum conditions and at a working potential of 0.6 V (vs. Ag/AgCl), the modified CPE has two linear response ranges, one from 30 pmol L�1 to 4 nmol L�1 of CLZ, the other from 4 nmol L�1 to 10 μmol L�1. The detection limit is as low as 9 pM. The transfer coefficient (α) and catalytic rate constant (kcat) were calculated and the reliability of the sensor was estimated for CLZ sensing in real samples where it gave satisfactory results. Figure not available: see fulltext.. © 2019, Springer-Verlag GmbH Austria, part of Springer Nature
Eco-efficiency measurement and material balance principle:an application in power plants Malmquist Luenberger Index
Incorporating Material Balance Principle (MBP) in industrial and agricultural performance measurement systems with pollutant factors has been on the rise in recent years. Many conventional methods of performance measurement have proven incompatible with the material flow conditions. This study will address the issue of eco-efficiency measurement adjusted for pollution, taking into account materials flow conditions and the MBP requirements, in order to provide ‘real’ measures of performance that can serve as guides when making policies. We develop a new approach by integrating slacks-based measure to enhance the Malmquist Luenberger Index by a material balance condition that reflects the conservation of matter. This model is compared with a similar model, which incorporates MBP using the trade-off approach to measure productivity and eco-efficiency trends of power plants. Results reveal similar findings for both models substantiating robustness and applicability of the proposed model in this paper
Разработка технологического процесса изготовления опоры двигателя
Выпускная квалификационная работа состоит из 4 разделов. В качестве задания был получен чертёж детали для которой разработан технологический маршрут изготовления. В технологическом разделе даны расчёты и пояснения для обеспечения требований, заданных конструктором. В качестве заготовки выбран круглый прокат алюминиевого сплава Д16Т. В конструкторском разделе спроектировано приспособления для сверления отверстий. В экономическом разделе выполнения расчёт стоимости детали. В разделе социальной ответственности и безопасности жизнедеятельности приведены основные требования для безопасной работы оператора за станком.This work is devoted to creation of technological process of the part "engine bracket" and consist of 4 parts. The first part is considering sequence of machining workpiece, calculation of operational time and cutting conditions. The second part is devoted to special device, which helps drilling accurate holes. The third and the forth parts are economical (where counting of the price is making) and social responsibility (where norms of pollution for workers and environment are calculated)
Polarization-Engineered Enhancement-Mode High-Electron-Mobility Transistors Using Quaternary AlInGaN Barrier Layers
The Status of Evidence-Based Dentistry in Iran
Evidence-Based Dentistry (EBD) is very limitedly known in Iran, and has been defined as an approach to oral healthcare that requires the judicious integration of systemic assessments of clinically relevant scientific evidences, related to patient’s history and oral and medical conditions, with dentist’s clinical expertise and patient’s treatment needs and preferences. (1-5) The EBD is a popular medical field worldwide, involving the utilization of the results of clinical dental research that improves decision-making procedures to render the best treatment available to patients, determining the highest-quality treatment methods. (6, 7
Development of an immune function assay by measuring intracellular adenosine triphosphate (iATP) levels in mitogen-stimulated CD4+ T lymphocytes
We developed an immune function assay for monitoring CD4+ T cells activity based on changes in intracellular adenosine triphosphate (iATP) levels after phytohemagglutinin (PHA) stimulation. Blood samples were obtained from 40 healthy subjects and 30 RTRs and incubated with 5 µg/mL of PHA for 15�18 hr at 37°C and 5 CO2. Afterward, the CD4+ T cells were separated by antibody-coated magnetic beads and lysed. Then, iATP content in unstimulated and stimulated conditions was measured by luciferin-luciferase reaction using a log-log standard curve. The iATP levels showed significant increase in CD4+ T cells in both healthy persons (mean: 550 ± 142 ng/mL vs. 109 ± 54 ng/mL) and RTRs (mean: 394 ± 160 ng/mL vs. 52 ± 37 ng/mL) after PHA stimulation (P < 0.001). However, the iATP production in RTRs was significantly lower than that in healthy individuals; both prior to and after stimulation with PHA (P < 0.001). No gender-specific difference in iATP production was observed between women and men subjects. This rapid and low-cost assay reflects the degree of immune cell function through assessment of CD4+ T cells activation. Thus, it can be used for evaluation of immune system status in immunodeficient individuals as well as in immunosuppressed transplant recipients who needs drug adjustment. © 2016 Taylor & Francis
Study of the effect of Titanium dioxide nano particle size on efficiency of the dye-sensitized Solar cell using natural Pomegranate juice
Dye-sensitized solar cell (DSSC) using natural Pomegranate juice as dye-sensitizeris fabricated and characterized. DSSCS consist of a working electrode, a redox electrolyte containing iodide and tri-iodide ions and a counter electrode. A nanocrystalline TiO2 semiconductor with a wide band-gap coated with a monolayer dye-sensitizer is used as working electrode. The effect of titanium dioxide (TiO2) nanoparticle size on efficiency of the DSSC based Pomegranate juice as a sensitizer is studied. For monolayer structure, we used two sizes of TiO2 nanoparticle (25 nm and 100 nm) and a mixture of these two sizes. The highest efficiency of 0.61% was obtained with mixture of 25 and 100 nm TiO2 nano-particles in working electrode. For double-layer structure, we used 100 and 400 nm size TiO2 particles as light-scattering. The best efficiency was obtained using 400 nm TiO2 as light-scattering particles
Earlier diagnoses of acute leukemia by a sandwich type of electrochemical aptasensor based on copper sulfide-graphene composite
Due to high affinity and specificity of aptamers, they are widely considered for construction of aptasensor to specific recognizing of analytes in biological complex matrix. So, in this work we design a high selective and sensitive aptasensor for leukemia cancer cells (CCRF-CEM) via superior catalytic effect of copper sulfide-graphene (CuS-GR) nanocomposite as label and Au-GR nanocomposite as sensing platform. The CuS-GR nano-composite (label component) is CuS nanoparticles that wrapping on graphene sheets. Its catalytic activity (CuS-GR) increases the current of sensor in parallel with adding of CCRF-CEM and provide sensitive detection of analytes. The detailed of signal amplification and effect on the aptasensor performance completely discussed. This sensor has a linear range of 50�1 � 106 cell mL�1, with a limit of detection of 18 cell mL�1. Also, the developed aptasensor has a significance specificity, high sensitivity and accuracy. It was used for the identification of CCRF-CEM cells in blood samples. © 2020 Elsevier B.V