Obtaining Au thin films in atmosphere of reactive nitrogen through magnetron sputtering

4d and 5d series of the transition metals are used to the obtaining nitrides metallic, due to the synthesis of PtN, AgN and AuN in the last years. Different nitrides are obtained in the Plasma Assisted Physics Vapour Deposition system, due to its ionization energy which is necessary for their formation. In this paper a Magnetron Sputtering system was used to obtain Au thin films on Si wafers in Nitrogen atmosphere. The substrate temperature was varied between 500 to 950°C. The samples obtained at high temperatures (>500°C) show Au, Si and N elements, as it is corroborated in the narrow spectrum obtained for X-Ray Photoelectron Spectroscopy; besides the competition of orientation crystallographic texture between (111) and (311) directions was present in the X-Ray Diffraction analysis to the sample heated at 950°C

Patient centred diagnosis: sharing diagnostic decisions with patients in clinical practice.

Patient centred diagnosis is best practised through shared decision making; an iterative dialogue between doctor and patient, whichrespects a patient’s needs, values, preferences, and circumstances. Shared decision making for diagnostic situations differs fundamentally from that for treatment decisions. This has important implications when considering its practical application. The nature of dialogue should be tailored to the specific diagnostic decision; scenarios with higher stakes or uncertainty usually require more detailed conversation

Focalization of Acoustic Vortices Using Phased Array Systems

AbstractAcoustic vortices (AV) are helical wavefronts that exhibit a screw-type dislocation and a phase singularity along its principal axis of propagation, at which the pressure of the field is zero. AV can be generated using various methods among which stands out the use of phased array systems because they allow us to electronically control the acoustic beam by means of the application of a given delay law to the array elements. Little research has been reported regarding the focalization of AV to obtain a higher pressure distribution. In view of this, this work presents the study of different delay laws for generating and focusing AV. The analysis of the resultant geometry and pressure distribution of the focused beams is included. We demonstrate that it is possible to increase the pressure amplitude up to 3 times with respect to a non-focalized, at the focal distance. Experimental tests were carried out using a hexagonal multitransducer of 30 elements at 40kHz. A good agreement between simulations and experimental results was obtained

AuNx stabilization with interstitial nitrogen atoms: A Density Functional Theory Study

Researchers have been studying 4d and 5d Series Transition Metal Nitrides lately as a result of the experimental production of AuN, PtN, CuN. In this paper, we used the Density Functional Theory (DFT) implementing a pseudopotential plane-wave method to study the incorporation of nitrogen atoms in the face-centered cube (fcc) lattice of gold (Au). First, we took the fcc structure of gold, and gradually located the nitrogen atoms in tetrahedral (TH) and octahedral (OH) interstitial sites. AuN stabilized in: 2OH (30%), 4OH and 4TH (50%), 4OH - 2TH (close to the wurtzite structure) and 6TH (60%). This leads us to think that AuN behaves like a Transition Metal Nitride since the nitrogen atoms look for tetrahedral sites. © Published under licence by IOP Publishing Ltd

Charged Annular Disks and Reissner-Nordstr\"{o}m Type Black Holes from Extremal Dust

We present the first analytical superposition of a charged black hole with an annular disk of extremal dust. In order to obtain the solutions, we first solve the Einstein-Maxwell field equations for sources that represent disk-like configurations of matter in confomastatic spacetimes by assuming a functional dependence among the metric function, the electric potential and an auxiliary function,which is taken as a solution of the Laplace equation. We then employ the Lord Kelvin Inversion Method applied to models of finite extension in order to obtain annular disks. The structures obtained extend to infinity, but their total masses are finite and all the energy conditions are satisfied. Finally, we observe that the extremal Reissner-Nordstr\"{o}m black hole can be embedded into the center of the disks by adding a boundary term in the inversion.Comment: 17 revtex pages, 8 eps figure

Finite axisymmetric charged dust disks in conformastatic spacetimes

An infinite family of axisymmetric charged dust disks of finite extension is presented. The disks are obtained by solving the vacuum Einstein-Maxwell equations for conformastatic spacetimes, which are characterized by only one metric function. In order to obtain the solutions, it is assumed that the metric function and the electric potential are functionally related and that the metric function is functionally dependent of another auxiliary function, which is taken as a solution of Laplace equation. The solutions for the auxiliary function are then taken as given by the infinite family of generalized Kalnajs disks recently obtained by Gonz\'alez and Reina (MNRAS 371, 1873, 2006), which is expressed in terms of the oblate spheroidal coordinates and represents a well behaved family of finite axisymmetric flat galaxy models. The so obtained relativistic thin disks have then a charge density that is equal, except maybe by a sign, to their mass density, in such a way that the electric and gravitational forces are in exact balance. The energy density of the disks is everywhere positive and well behaved, vanishing at the edge. Accordingly, as the disks are made of dust, their energy-momentum tensor it agrees with all the energy conditions.Comment: Submitted to PR

Catálogo de las orquídeas del Valle geográfico del río Cauca y su piedemonte andino bajo, Sur-occidente colombiano.

Twenty forest patches belonging to the potential domain of tropical dry forest were explored in the Cauca Valley bioregion (421,000 ha) in southwestern Colombia. Sampling was carried out from September, 2009,to October, 2010, at elevations between 930 and 1,200 m. During the field evaluations we reach 346 hours of observation distributed in 60 Km. This exploration produced the most complete list of orchids ever made in this territory, with a total of 70 species belonging to 41 genera. This figure is 112% (37 species) greater than existing records for this bioregion, and represents 1.74% of the total of orchid species reported for Colombia. Several new regional records were found, as well as at least three endemic species, probably one local extinction, and one new species for science. This figure is compared with other much smaller areas, such as the forest of Yotoco in the department of Valle del Cauca, and possible explanations for the low species richness are proposed. At the same time, a bank of digital high-resolution images of the orchid flora of the department was begun

Acrylic bone cements modified with graphene oxide: Mechanical, physical, and antibacterial properties

Bacterial infections are a common complication after total joint replacements (TJRs), the treatment of which is usually based on the application of antibiotic-loaded cements; however, owing to the increase in antibiotic-resistant microorganisms, the possibility of studying new antibacterial agents in acrylic bone cements (ABCs) is open. In this study, the antibacterial effect of formulations of ABCs loaded with graphene oxide (GO) between 0 and 0.5 wt. % was evaluated against Gram-positive bacteria: Bacillus cereus and Staphylococcus aureus, and Gram-negative ones: Salmonella enterica and Escherichia coli. It was found that the effect of GO was dependent on the concentration and type of bacteria: GO loadings ≥0.2 wt. % presented total inhibition of Gram-negative bacteria, while GO loadings ≥0.3 wt. % was necessary to achieve the same effect with Gram-positives bacteria. Additionally, the evaluation of some physical and mechanical properties showed that the presence of GO in cement formulations increased wettability by 17%, reduced maximum temperature during polymerization by 19%, increased setting time by 40%, and increased compressive and flexural mechanical properties by up to 17%, all of which are desirable behaviors in ABCs. The formulation of ABC loading with 0.3 wt. % GO showed great potential for use as a bone cement with antibacterial properties