491 research outputs found

    Reaction kinetics of the formation of intermetallic Fe – Zn during hot - dip galvanizing of steel

    Get PDF
    This review article mainly describes the composition of intermetallic Fe - Zn, i.e. zeta (ζ), delta (ÎŽ1k + ÎŽ1p), gamma1 (Γ1) and gamma (Γ) on galvanized steel during low temperature galvanization (t ~ 450 °C). It gives detailed the formation, growth of individual phases during galvanization and their interaction. In terms of the kinetics, the formation of the coating is defined by a parabolic kinetic equation of the growth of different intermetallic phases under ideal conditions. From the available literature the rate constants of the formation of individual intermetallic phases and also for the total coating are cited. The composition of the intermetallic phases, iron content, crystal structure, and group symmetry in which the surface of galvanized steel forms

    Incorporation of tungsten metal fibers in a metal and ceramic matrix

    Get PDF
    Tungsten fibers have high tensile strength but a poor oxidation resistance at elevated temperatures. Using this first characteristic and to prevent oxidation of tungsten coated composite materials in which the primary requirement: reinforcement against destruction or deformation, was studied on tungsten fibers and tungsten wires which were coated by applying the metal and ceramic powders via plasma spraying device in plasma generator WSPÂź. Deposition took place in an atmosphere of Ar + 7 % H2, sufficient to reduce the oxidized trace amounts of tungsten

    Environmental variables affecting small‐scale distributions of five rotifer species in Lancaster Lake, Michigan

    Full text link
    The small‐scale distributions of the rotifers Polyarthra vulgaris, Synchaeta stylata, Conochilus unicornis, Hexarthra mira , and Asplanchna priodonta were investigated in Lancaster Lake, Cheboygan County, Michigan, July 21, 1974. Measurements were taken for 13 depths (at 1‐m intervals) and at 4 times of the day (1:00 AM, 7:00 AM, 1:00 PM, and 7:00 PM). In addition, the abundances of 6 crustacean, 2 planktonic dipteran, and 10 algal species, as well as temperature, light, oxygen, chlorophyll a , alkalinity, pH and free carbon dioxide were measured. Whereas abiotic factors appeared to control large scale occupation of the lake, and excluded most species from the deeper portions of the hypolimnion, small‐scale distributional variation of the rotifers depended upon biotic interactions, particularly with the crustacean zooplankton.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/90242/1/3510620404_ftp.pd

    Incorporation of tungsten metal fibers in a metal and ceramic matrix

    Get PDF
    Tungsten fibers have high tensile strength but a poor oxidation resistance at elevated temperatures. Using this first characteristic and to prevent oxidation of tungsten coated composite materials in which the primary requirement: reinforcement against destruction or deformation, was studied on tungsten fibers and tungsten wires which were coated by applying the metal and ceramic powders via plasma spraying device in plasma generator WSPÂź. Deposition took place in an atmosphere of Ar + 7 % H2, sufficient to reduce the oxidized trace amounts of tungsten

    Boronized steels with corundum-baddeleyite coatings

    Get PDF
    The paper describes preparation and properties of anti-corrosion and anti-abrasive coatings from corundum-baddeleyite ceramics deposited on surface of low-carbon boronized steel S235JRH-1.0038 (EN 10025-1) by plasma spraying method. Adhesive interlayers Fe2B reaches bond strength of up to 20 MPa in the pull-off tests, the ZrO2 - Al2O3 - SiO2 coatings have a value of fracture adhesion of 4 - 6 MPa. Hardness of these ceramic coatings on steel is as high as 1 800 HV100 and its polarization resistance is 1 600 Ω/cm2 to 4 000 Ω/cm2

    Description of structure of Fe-Zn intermetalic compounds present in hot-dip galvanized coatings on steel

    Get PDF
    The article is describing formation, composition, morphology and crystallographic characteristics of intermetalic compounds Fe - Zn present in the coating formed during the process of low-temperature hot-dip galvanizing of carbon steels. In mutual confrontation we introduce older bibliography and results of latest modern researches based on combination of most precise analytical methods

    Effect of chemical composition of steel on the structure of hot – dip galvanized coating

    Get PDF
    This article describes the effect of the content of conventional steel impurity elements on the thickness and composition of the zinc layer. This article is focused primarily on low-temperature, batch hot-dip galvanizing; however, the continuous coating process is also mentioned. The main discussion covers galvanizing from pure zinc melt, and only touches on galvanizing from melts with the usual amounts of aluminium (0,2 wt. %). Silicon, phosphorus, aluminium and sulfur may have an especially negative effect on the mechanical properties of the coating and its final appearance. The content of ballast carbon and manganese has a rather limited effect on composition and coating thickness

    Molecular phylogeny of diplomonads and enteromonads based on SSU rRNA, alpha-tubulin and HSP90 genes: Implications for the evolutionary history of the double karyomastigont of diplomonads

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Fornicata is a relatively recently established group of protists that includes the diplokaryotic diplomonads (which have two similar nuclei per cell), and the monokaryotic enteromonads, retortamonads and <it>Carpediemonas</it>, with the more typical one nucleus per cell. The monophyly of the group was confirmed by molecular phylogenetic studies, but neither the internal phylogeny nor its position on the eukaryotic tree has been clearly resolved.</p> <p>Results</p> <p>Here we have introduced data for three genes (SSU rRNA, α-tubulin and HSP90) with a wide taxonomic sampling of Fornicata, including ten isolates of enteromonads, representing the genera <it>Trimitus </it>and <it>Enteromonas</it>, and a new undescribed enteromonad genus. The diplomonad sequences formed two main clades in individual gene and combined gene analyses, with <it>Giardia </it>(and <it>Octomitus</it>) on one side of the basal divergence and <it>Spironucleus</it>, <it>Hexamita </it>and <it>Trepomonas </it>on the other. Contrary to earlier evolutionary scenarios, none of the studied enteromonads appeared basal to diplokaryotic diplomonads. Instead, the enteromonad isolates were all robustly situated within the second of the two diplomonad clades. Furthermore, our analyses suggested that enteromonads do not constitute a monophyletic group, and enteromonad monophyly was statistically rejected in 'approximately unbiased' tests of the combined gene data.</p> <p>Conclusion</p> <p>We suggest that all higher taxa intended to unite multiple enteromonad genera be abandoned, that <it>Trimitus </it>and <it>Enteromonas </it>be considered as part of Hexamitinae, and that the term 'enteromonads' be used in a strictly utilitarian sense. Our result suggests either that the diplokaryotic condition characteristic of diplomonads arose several times independently, or that the monokaryotic cell of enteromonads originated several times independently by secondary reduction from the diplokaryotic state. Both scenarios are evolutionarily complex. More comparative data on the similarity of the genomes of the two nuclei of diplomonads will be necessary to resolve which evolutionary scenario is more probable.</p

    Seasonal abundance of small cladocerans in Lake Mangakaware, Waikato, New Zealand

    Get PDF
    The seasonal changes in the dynamics and life histories of the Cladocera in Lake Mangakaware, North Island, New Zealand, were studied over 19 months by sampling at weekly or 2-weekly intervals. Lake Mangakaware is a 13.3 ha polymictic lake with high nutrient status, low Secchi disc transparencies, and an unstable thermal regime. The four planktonic cladoceran species (Bosmina longirostris, B. meridionalis, Ceriodaphnia pulchella, and C. dubia) exhibited disjunct population maxima. Only B. longirostris was perennially present. All species exhibited low fecundities and low lipid content, indicating that food resources were limited and that competitive interactions and resistance to starvation were probably important in determining species success. Increases in body size in cooler seasons were unrelated to clutch size, giving further support for the view that available food was limited. These results are consistent with previous experimental findings that subtle differences in life history can determine seasonal success and the outcome of competition between similar species

    Author Correction: Genomic analysis finds no evidence of canonical eukaryotic DNA processing complexes in a free-living protist.

    Get PDF
    Funder: Canadian Institutes of Health Research (Grant: FRN-142349) Natural Sciences and Engineering Research Council of Canada (Grant: RGPIN 05871-2014)Abstract: Cells replicate and segregate their DNA with precision. Previous studies showed that these regulated cell-cycle processes were present in the last eukaryotic common ancestor and that their core molecular parts are conserved across eukaryotes. However, some metamonad parasites have secondarily lost components of the DNA processing and segregation apparatuses. To clarify the evolutionary history of these systems in these unusual eukaryotes, we generated a genome assembly for the free-living metamonad Carpediemonas membranifera and carried out a comparative genomics analysis. Here, we show that parasitic and free-living metamonads harbor an incomplete set of proteins for processing and segregating DNA. Unexpectedly, Carpediemonas species are further streamlined, lacking the origin recognition complex, Cdc6 and most structural kinetochore subunits. Carpediemonas species are thus the first known eukaryotes that appear to lack this suite of conserved complexes, suggesting that they likely rely on yet-to-be-discovered or alternative mechanisms to carry out these fundamental processes
    • 

    corecore