High accuracy transfer printing of single-mode membrane silicon photonic devices

A transfer printing (TP) method is presented for the micro-assembly of integrated photonic devices from suspended membrane components. Ultra thin membranes with thickness of 150nm are directly printed without the use of mechanical support and adhesion layers. By using a correlation alignment scheme vertical integration of single-mode silicon waveguides is achieved with an average placement accuracy of 100±70nm. Silicon (Si) μ-ring resonators are also fabricated and show controllable optical coupling by varying the lateral absolute position to an underlying Si bus waveguide

Transfer Printing of Photonic Nanostructures to Silicon Integrated Circuits

Optical systems require the integration of technologies fabricated on different materials. We use a transfer printing technique to integrate pre-processed III-V, polymer and silicon membrane devices onto passive optical circuits with nano-metric positional accuracy

Direct LED writing of submicron resist patterns : towards the fabrication of individually-addressable InGaN submicron stripe-shaped LED arrays

Submicron stripe-shaped InGaN light-emitting diode (LED) arrays with individually addressable capabilities are demonstrated. The critical submicronstripe metallic electrodes, which define the emission pattern, are formed by direct LED writing in a mask-free manner. The individually addressable submicron-stripe LEDs show excellent performance in terms of their electrical characteristics (with typical turn-on voltage of 3 V, operational stability and power output up to 28 μW at 3 mA). Unlike conventional broad-sized LEDs, the efficiency droop of the submicron-stripe LED is significantly suppressed-in fact, there is no efficiency droop for current densities up to 100 A/cm2. Furthermore, the submicron-stripe LED shows a lower temperature-dependent shift of the emission wavelength. The lateral emission width is increased with increasing injection current, resulting in a wider lateral emission size than the metallic submicron-stripe electrode. The underlying physics of these phenomena are analysed. Such submicron-stripe LED arrays open up promising applications in nanophotonics and bio-sensing

Alloyed-core colloidal quantum dot DFB laser with encapsulated gain region

A CdSxSe1−x/ZnS colloidal quantum dot distributed-feedback laser operating in the nanosecond-regime with a threshold below 3 kW/cm2 is reported. The laser emits vertically up to 40 nJ at 600 nm with an efficiency of 1.2%

An oligofluorene truxene based distributed feedback laser for biosensing applications

The first example of an all-organic oligofluorene truxene based distributed feedback laser for the detection of a specific protein–small molecule interaction is reported. The protein avidin was detected down to View the MathML source1μgmL−1 using our biotin-labelled biosensor platform. This interaction was both selective and reversible when biotin was replaced with desthiobiotin. Avidin detection was not perturbed by Bovine Serum Albumin up to View the MathML source50,000μgmL−1. Our biosensor offers a new detection platform that is both highly sensitive, modular and potentially re-usable

CdSxSe1-x/ZnS semiconductor nanocrystal laser with sub 10kW/cm² threshold and 40nJ emission output at 600 nm

A colloidal quantum dot laser emitting at 600 nm with a sub 10kW/cm2 threshold at 5ns pulse pumping is reported. The device has a second order distributed feedback cavity for vertical emission and incorporates a bilayer planar waveguide structure based on a film of yellow-orange alloyed-core/shell CdSxSe1-x/ZnS quantum dots over-coated with polyvinyl alcohol. A study of the amplified spontaneous regime indicates that the quantum dot gain region behaves like a quasi-three level system and that the bilayer structure design increases the modal gain compared to a single layer of quantum dots. An output of 40nJ per pulse is measured for a total pump-to-signal efficiency above threshold of 3%

Diode-pumped, mechanically-flexible polymer DFB laser encapsulated by glass membranes

A diode-pumped, mechanically-flexible organic distributed-feedback laser that is fully encapsulated with ultra-thin glass is reported. The organic laser is excited by 450nm laser diode and emits at 537 nm with an oscillation threshold of 290 W/cm2. The encapsulation format of the device results in a photostability that is improved by two orders of magnitude compared to a non-encapsulated reference device while maintaining mechanical flexibility thanks to an overall device thickness below 105 μm. The laser is also wavelength-tunable between 535 nm and 545 nm by bending the ultra-thin glass structure

Gb/s visible light communications with colloidal quantum dot color converters

This paper reports the utilization of colloidal semiconductor quantum dots as color converters for Gb/s visible light communications. We briefly review the design and properties of colloidal quantum dots and discuss them in the context of fast color conversion of InGaN light sources, in particular in view of the effects of self-absorption. This is followed by a description of a CQD/polymer composite format of color converters. We show samples of such color-converting composite emitting at green, yellow/orange and red wavelengths, and combine these with a blueemitting microsize LED to form hybrid sources for wireless visible light communication links. In this way data rates up to 1 Gb/s over distances of a few tens of centimeters have been demonstrated. Finally, we broaden the discussion by considering the possibility for wavelength division multiplexing as well as the use of alternative colloidal semiconductor nanocrystals

RGB and white-emitting organic lasers on flexible glass

Two formats of multiwavelength red, green and blue (RGB) laser on mechanically-flexible glass are demonstrated. In both cases, three all-organic, vertically-emitting distributed feedback (DFB) lasers are assembled onto a common ultra-thin glass membrane substrate and fully encapsulated by a thin polymer overlayer and an additional 50µm-thick glass membrane in order to improve the performance. The first device format has the three DFB lasers sitting next to each other on the glass substrate. The DFB lasers are simultaneously excited by a single overlapping optical pump, emitting spatially separated red, green and blue laser output with individual thresholds of, respectively, 28 µJ/cm2, 11 µJ/cm2 and 32 µJ/cm2 (for 5 ns pump pulses). The second device format has the three DFB lasers, respectively the red, green and blue laser, vertically stacked onto the flexible glass. This device format emits a white laser output for an optical pump fluence above 42 µJ/cm2

Organic semiconductor laser biosensor : design and performance discussion

Organic distributed feedback lasers can detect nanoscale materials and are therefore an attractive sens- ing platform for biological and medical applications. In this paper, we present a model for optimizing such laser sensors and discuss the advantages of using an organic semiconductor as the laser material in comparison to dyes in a matrix. The structure of the sensor and its operation principle are described. Bulk and surface sensing exper- imental data using oligofluorene truxene macromolecules and a conjugated polymer for the gain region is shown to correspond to modeled values and is used to assess the biosensing attributes of the sensor. A comparison between organic semiconductor and dye-doped laser sensitivity is made and analyzed theoretically. Finally, experimental and theoretical specific biosensing data is provided and methods for improving sensitivity are discussed