Sustainable earth walls to meet the building regulations

The thermal conductivity and diffusivity of un-fired clay bricks, a straw clay mixture and straw bales have been measured using a thermal probe technique, with an iterative method for data analysis. The steady-state air-to-air thermal transmittance, or U-value, and the time-dependent thermal properties of some proposed sustainable earth wall constructions are presented. Sustainable cavity walls of un-fired clay bricks with paper, straw or wool cavity insulation have thermal transmittances less than 0.35 W/m2 K, and therefore meet the current United Kingdom Building Regulations. A review of possible methods for thermally up-grading existing earth walls, by adding an internal insulated timber frame construction, again demonstrates possible compliance with the current UK thermal regulations

Making Heat Visible: Promoting Energy Conservation Behaviors Through Thermal Imaging

Householders play a role in energy conservation through the decisions they make about purchases and installations such as insulation, and through their habitual behavior. The present U.K. study investigated the effect of thermal imaging technology on energy conservation, by measuring the behavioral effect after householders viewed images of heat escaping from or cold air entering their homes. In Study 1 (n = 43), householders who received a thermal image reduced their energy use at a 1-year follow-up, whereas householders who received a carbon footprint audit and a non-intervention control demonstrated no change. In Study 2 (n = 87), householders were nearly 5 times more likely to install draught proofing measures after seeing a thermal image. The effect was especially pronounced for actions that addressed an issue visible in the images. Findings indicate that using thermal imaging to make heat loss visible can promote energy conservation

Analysis of thermal-probe measurements using an iterative method to give sample conductivity and diffusivity data

The application of Microsoft Excel Solver routines to analyze data from a thermal probe placed in a number of samples is described. The successful application of the Solver routine to the thermal probe temperature time data requires the selection of an appropriate time interval. The various critical times are discussed and a method is proposed for selecting the appropriate Solver routine and the time interval over which the experimental data must be analyzed. Values of the sample thermal conductivity, the thermal diffusivity and the probe to sample conductance are reported for a stainless steel probe in unused mineral oil, and paraffin wax and for a copper probe in Magna904 and PTFE. The results for a commercial probe in agar agree with accepted data for water and the results for a clay-straw mixture demonstrates the method applied to a good insulator

Delivering sustainable buildings in retail construction

Session: Sustainability: Theory and Design The article can be viewed at: http://www.arcom.ac.uk/-docs/proceedings/ar2012-1455-1465_Dangana_Pan_Goodhew.pdfThe demand for high performance 'green' or 'sustainable' buildings is becoming increasingly important in the retail industry. Large construction companies in this sector have started to show leadership by working with their customers and supply chains towards sustainability in both products and operations. However, it remains associated risks be minimised, in order to add value and differentiate the output of retail construction. This paper reviews the practice of sustainable buildings within the context of retail construction, and also explores how the UK mainstream retail sector is currently addressing the challenges of sustainable retail buildings. The arguments are informed by a combination of literature review, a desk study of sustainability strategies of large client organisations and construction companies, and a case study with a leading construction company in the UK. The results demonstrate that businesses can benefit from embracing a sustainable approach while they need to adapt their business models to the rapidly changing environment. A demand-driven sustainability agenda is called for in the UK retail sector. The results also provide the basis for an in-depth, longitudinal case study to develop a framework to optimize process, energy and carbon efficiency in retail construction using sustainable technology. Such a framework should provide a sustainable technology model for retail customers to realize the full benefits of sustainable buildings and also assist construction companies and their professional advisors deliver green buildings more efficiently in the future

Validation of data analysis routines for a thermal probe apparatus using numerical data sets

Most thermal properties of construction materials used in the analysis of building performance have been measured under laboratory conditions, using a guarded hot box or hot plate apparatus. As a consequence, these properties seldom reflect the impact of actual conditions (especially moisture content) on the values of conductivity and diffusivity. Hence there is a need to develop techniques that allow to take into account local conditions, and measure building material properties in situ. One option available is the use of a thermal probe. The thermal probe technique is based on creating a line source in a material sample, and measuring the temperature rise in the sample in reaction to heat being applied. Obviously the data analysis routines used to calculate thermal conductivity and thermal diffusivity based on the temperature rise observed are crucial to the success of the technique. Transient thermal simulation of a of a model representing a line source in an infinite material sample has been used to generate a set of numerical data sets to validate analysis routines in conjunction with an experimental thermal probe apparatus. Findings show that by careful application of these routines, a close agreement with simulation input values can be achieved, with errors of less than one percent. This validates the analysis routines and provides a deeper appreciation of the theoretical behaviour of a thermal probe

A Decision Making System for Selecting Sustainable Technologies for Retail Buildings

CIB Publication 382: Selected papers presented at the CIB World Building Congres Construction and Society, Brisbane 5-9 May 2013 Papers from the Designated Session TG66 - Energy and the Built EnvironmentThe implementation of sustainable technologies can improve the energy and carbon efficiency of existing retail buildings. However, the selection of an appropriate sustainable technology is a complex task due to the large number of technological alternatives and decision criteria that need to be considered. Also, there exist series of uncertainties that are associated with the use of sustainable technologies, but have to be evaluated to achieve realistic and transparent results. The selection of sustainable technology is therefore most challenging. An earlier study was conducted with UK experienced practitioners including clients/developers, engineers, contractors and suppliers to identify the drivers and barriers for the use of sustainable technologies in UK retail construction. One major barrier identified from the study was the lack of a decision making tool, highlighted by both construction professionals and stakeholders in the retail industry. The large number of alternatives and potential solutions require a decision support method to be implemented. Information data on the economic variables, energy performance and impact on the environment of these systems is presently affected by vagueness and lack of knowledge. To deal with this high level of complexity and uncertainty an evaluation support approach is needed. This paper aims to develop a decision making framework to assist both retailers and construction professionals to define and evaluate the selection of sustainable technological options for delivering retail buildings. The research was carried out through a combination of a critical literature review and a survey-based study using expert opinions of retailers and contractors. The developed framework of decision criteria should provide a sustainable technology model to assist both construction professionals and stakeholders in the retail industry to systematically and effectively select the most appropriate technology. This approach should make the decision progression more transparent and facilitate sustainable development of retail buildings in achieving the carbon targets set by the UK and other governments

An assessment of the potential returns of energy certificates for the UK household sector

Purpose – This article seeks to investigate the interconnections between the expectations of the impact of energy certificates issued within the UK domestic building sector through the Energy Performance of Buildings Directive (EPBD) and the actual number and financial implications of the energy saving measures (ESMs) achieved. Design/methodology/approach – The methodology uses two previously published surveys and compares these with a third independent survey by the authors focusing upon the discrepancies between planned action and implemented action, introducing the term human factor element (hfe). Findings – The article concludes that annual carbon savings arising from implementation of the Energy Performance Certificate (EPC) may be as low as 73.4?ktC over the five year term of the Kyoto Protocol even though 44 per cent of energy saving measure costs of £200 million are recouped within the same time period and savings will continue for up to 40 years. Achieving annual savings of only 14.7?ktC by 2010, such a figure represents a mere 0.3 per cent of the annual domestic 4.8?MtC savings announced by the government in its 2006 Climate Change Programme. Practical implications – Since the principal determinant in the uptake of ESMs is initial cost, it is considered that the EPBD is likely to remain an under-performing instrument in the promotion of energy sufficiency until such time as other complementary provisions are introduced. Originality/value – Sheds light upon the likely financial impact upon energy efficiency in domestic buildings by energy certificates

Thermal probe technology for buildings: the transition from laboratory to field measurements

This article reports the results of an investigation into the transfer of thermal probe measurement technology from laboratory use to actual buildings in order to undertake the in situ determination of thermal material properties. The imperative for using in situ measurements is 1) the impact of moisture content on thermal properties, 2) the possible wide range of variation of properties across most materials used in construction, and 3) the lack of data for new and innovative materials. Thermal probe technology offers the prospect of taking building specific data, addressing these issues. Based on commercially available thermal probes a portable measurement kit and accompanying measurement procedure have been developed. Three case study buildings, each having different materials, have been studied to ascertain whether or not the technique can be transferred to relatively uncontrolled environments while remaining capable of achieving a precision that is similar to an ASTM standard that can be related to thermal conductivity measurements of building materials. The results show that this is indeed the case, and that the use of thermal probe technology may yield thermal properties that vary significantly from the laboratory values currently used in building thermal engineering calculations

Between the devil and the deep blue sea: crime, policing and the western areas of Johannesburg, c.1930 - 1962

Paper presented at the Wits History Workshop: Structure and Experience in the Making of Apartheid, 6-10 February, 1990

"No easy walk to freedom": Political organisation in the western areas of Johannesburg between the world wars

African Studies Seminar series. Paper presented May, 1989The Western Areas of Johannesburg, and Sophiatown in particular, came to symbolize black protest in the 1950s and became arguably the most politicized area in the country, albeit for a short period. This paper will seek to explore the background to such developments by looking at the activities of political organisations prior to the Second World War, during an era recognised as one of limited political activity in the cities though not in the countryside, “the years of anguished impotence” according to one writer. (1