573 research outputs found
Corporate venture building as an innovation strategy
Corporate venture building happens when a company creates a separate entity or a new department to serve as a hub that allows them to innovate fast. Felipe Dulinski writes that the old model of trying to innovate at home is no longer suitable for the pace at which change is occurring. He says that venture building has become one of the main innovation strategies for corporations today
Phenomenology of the Baryon Resonance 70-plet at Large N_c
We examine the multiplet structure and decay channels of baryon resonances in
the large N_c QCD generalization of the N_c = 3 SU(6) spin-flavor 70. We show
that this ``70'', while a construct of large N_c quark models, actually
consists of five model-independent irreducible spin-flavor multiplets in the
large N_c limit. The preferred decay modes for these resonances fundamentally
depend upon which of the five multiplets to which the resonance belongs. For
example, there exists an SU(3) ``8'' of resonances that is eta-philic and
pi-phobic, and an ``8'' that is the reverse. Moreover, resonances with a strong
SU(3) ``1'' component prefer to decay via a K-bar rather than via a pi.
Remarkably, available data appears to bear out these conclusions.Comment: 26 pages, ReVTe
SU(3) Clebsch-Gordan Coefficients for Baryon-Meson Coupling at Arbitrary N_c
We present explicit formulae for the SU(3) Clebsch-Gordan coefficients that
are relevant for the couplings of large N_c baryons to mesons. In particular,
we compute the Clebsch-Gordan series for the coupling of the octet (associated
with mesons, and remains the correct representation at large N_c) to the large
N_c analogs of the baryon octet and decuplet representations.Comment: 8 pages, no figures, ReVTe
Charged particle detection performances of CMOS pixel sensors produced in a 0.18 um process with a high resistivity epitaxial layer
The apparatus of the ALICE experiment at CERN will be upgraded in 2017/18
during the second long shutdown of the LHC (LS2). A major motivation for this
upgrade is to extend the physics reach for charmed and beauty particles down to
low transverse momenta. This requires a substantial improvement of the spatial
resolution and the data rate capability of the ALICE Inner Tracking System
(ITS). To achieve this goal, the new ITS will be equipped with 50 um thin CMOS
Pixel Sensors (CPS) covering either the 3 innermost layers or all the 7 layers
of the detector. The CPS being developed for the ITS upgrade at IPHC
(Strasbourg) is derived from the MIMOSA 28 sensor realised for the STAR-PXL at
RHIC in a 0.35 um CMOS process. In order to satisfy the ITS upgrade
requirements in terms of readout speed and radiation tolerance, a CMOS process
with a reduced feature size and a high resistivity epitaxial layer should be
exploited. In this respect, the charged particle detection performance and
radiation hardness of the TowerJazz 0.18 um CMOS process were studied with the
help of the first prototype chip MIMOSA 32. The beam tests performed with
negative pions of 120 GeV/c at the CERN-SPS allowed to measure a
signal-to-noise ratio (SNR) for the non-irradiated chip in the range between 22
and 32 depending on the pixel design. The chip irradiated with the combined
dose of 1 MRad and 10^13 n_eq/cm^2 was observed to yield a SNR ranging between
11 and 23 for coolant temperatures varying from 15 C to 30 C. These SNR values
were measured to result in particle detection efficiencies above 99.5% and 98%
before and after irradiation respectively. These satisfactory results allow to
validate the TowerJazz 0.18 um CMOS process for the ALICE ITS upgrade.Comment: (v2) Added hyper-links; (v3) A typo correcte
A Study of Monolithic CMOS Pixel Sensors Back-thinning and their Application for a Pixel Beam Telescope
This paper reports results on a detailed study of charge collection and
signal-to-noise performance of CMOS monolithic pixel sensors before and after
back-thinning and their application in a pixel beam telescope for the ALS 1.5
GeV beam test facility.Comment: 6 pages, one figure, to appear on the proceedings of the the Sixth
International "Hiroshima" Symposium on the Development and Application of
Semiconductor Tracking Detectors, Carmel, CA, September, 200
Multinationale Unternehmen aus Entwicklungsländern
Auslandsdirektinvestitionen (ADI) sind in der globalen ökonomischen Entwicklung von essenzieller Bedeutung, da sie neue Arbeitsplätze schaffen, qualifizierte technische sowie leitende Arbeitskräfte liefern und Technologien transferieren. Multinationale Unternehmen (MNUs) nehmen den Platz von Entwicklungshelfern in der Welt ein und haben einen wesentlichen Anteil an der rasanten Industrialisierung durch ihre Aktivitäten auf internationalem Niveau. Die Markteintrittsstrategien welche MNUs zur Verfügung stehen, um ihre Geschäftsaktivitäten ins Ausland zu erweitern, umfassen sowohl Export, Lizenzierung, Franchising, Vertragsfertigung, Joint Ventures, strategische Allianzen, Managementverträge und natürlich ADI. MNUs verfolgen gewinn-, markt-, sozial- und ökologieorientierte Ziele und sind Träger von neuen Technologien, produktiven Kapazitäten, Know-How Transfer, natürliche Ressourcen und Management Fähigkeiten. Durch ihre Tätigkeiten generieren sie sogenannte Spillover-Effekte, welche den heimischen Unternehmen die Möglichkeit gibt deren Wettbewerbsvorteile zu stärken bzw. überhaupt welche zu kreieren. Zudem können diverse Einflüsse von ADI auf die heimischen Entwicklungsländer erfasst werden, darunter Auswirkungen auf die Zahlungsbilanz, Staatseinkünfte, Industriestruktur, Beschäftigung und Einkommensverteilung, Technologie und Know-How Transfer, sowie gesellschaftspolitische Effekte.
Aufgrund ihrer neuen Technologien, reichlichen Kapitals, Produktionskapazitäten, Werbemittel und Vertriebsnetze tätigen MNUs aus Industrieländern schon lange ADI. Die Entstehung von international tätigen und global verankerten MNUs aus Entwicklungsländern ist ein relativ modernes Phänomen. Für eine lange Zeit waren Entwicklungsländer wie Indien, China, Mexiko und Malaysia lediglich Empfängerländer von ADI bzw. multinationalen Aktivitäten. Diese Entwicklungsländer werden in einem eigenen Abschnitt analysiert und teilen eine Vielzahl an grundlegenden Problemen, u.a. geringes Pro-Kopf-Einkommen, niedrige Spar- und Investitionstätigkeit, passive Handelsbilanz, hohe Arbeitslosigkeit, unzureichende Infrastruktur, hohes Bevölkerungswachstum, geringe durchschnittliche Lebenserwartung, unzureichende Ernährung und Mangel an Wasser, Kinderarbeit, unzureichende Bildung, sowie politische Instabilität. Seit Mitte der 1960er Jahre steigt die Anzahl von MNUs aus diesen Entwicklungsländern rapide an. Unter den 100 größten Unternehmen weltweit (gemessen am Umsatz) stammen mittlerweile bereits 11 aus Entwicklungsländern und erstmals lockten im Jahr 2011 Entwicklungs- und Transformationsländer über die Hälfte des globalen ADI an.
Viele der Entwicklungsländer wurden bzw. werden auch heute noch aufgrund heimischer Restriktionen und stagnierenden Heimatmärkten von den Weltmärkten abgegrenzt, was zur Folge hatte, dass sie keinen Wettbewerb hatten und keinen Anreiz bzw. Druck, um ihre Technologien oder die Qualität ihrer Produkte zu verbessern. Seit Anfang der 1980er Jahre sind bestimmte Investitionsbarrieren in Entwicklungsländern gefallen und der heimische Wettbewerb somit angekurbelt, Hand in Hand gehend mit sinkenden Margen an lokalen Märkten. Diese Handelsliberalisierung war ursächlich für die internationale Ausrichtung von Unternehmen aus Entwicklungsländern, die auf dynamische Weise Zugang zu Ressourcen, Technologien und Märkten suchten. Die Internationalisierung und die Chancen der Globalisierung wurde von MNUs aus Entwicklungsländern im höchsten Maß genutzt.
Die Vorteile von MNUs aus Entwicklungsländern umfassen die Adaptionsfähigkeit von Technologien, den Tätigkeitsumfang welcher diesen eine höhere Flexibilität bereitet, Personalqualifikation für den Einsatz in anderen Entwicklungsländern, Marketingstrategien und ethische Verbindungen in den Gastgeberländer ihrer ADI. MNUs aus Entwicklungsländern tendieren eher dazu im Ausland Partnerschaften einzugehen, als Instrument um hochwertigere Produkte oder neue Produkte zu entwickeln, die ansonsten ausserhalb ihrer Kernkompetenz gewesen wären. Diese MNUs siedeln sich anfangs zumeist in andere Entwicklungsländer an, da sie unter bekannten Bedingungen ihre Vorteile am besten ausschöpfen können. Dunnings OLI-Konzept (ownership, location und internalization advantages) ist eine Erklärung für die Internationalisierung und ADI von MNUs aus Entwicklungsländern. Es bestehen verschiedene Motive für ADI, die je nach Ausprägung der soeben genannten Faktoren unterschiedlich sind, nämlich Markt-, Export-, Ressourcen-, Effizienz-, und Strategische Innovations- und Technologieausrichtung.
Den zunehmenden Wettbewerb wirken MNUs aus Entwicklungsländern mit der Diversifizierung ihrer Produktportfolios und weiterer rasanten Expansion entgegen. Es zeichnet sich derzeit der Trend ab, dass sich die Internationalisierung in Richtung Industrieländer bewegt. Um die theoretischen Ansätze zu untermauern, werden in dieser Diplomarbeit zum Abschluss vier Fallstudien zu MNUs aus jenen Entwicklungsländern, die auch in einem eigenen Abschnitt analysiert wurden, behandelt. Diese sind Tata Steel (Indien), Haier Group (China), CEMEX (Mexiko) und Sime Darby Berhad (Malaysia)
Development of CMOS pixel sensors for tracking and vertexing in high energy physics experiments
CMOS pixel sensors (CPS) represent a novel technological approach to building
charged particle detectors. CMOS processes allow to integrate a sensing volume
and readout electronics in a single silicon die allowing to build sensors with
a small pixel pitch () and low material budget () per layer. These characteristics make CPS an attractive option for
vertexing and tracking systems of high energy physics experiments. Moreover,
thanks to the mass production industrial CMOS processes used for the
manufacturing of CPS the fabrication construction cost can be significantly
reduced in comparison to more standard semiconductor technologies. However, the
attainable performance level of the CPS in terms of radiation hardness and
readout speed is mostly determined by the fabrication parameters of the CMOS
processes available on the market rather than by the CPS intrinsic potential.
The permanent evolution of commercial CMOS processes towards smaller feature
sizes and high resistivity epitaxial layers leads to the better radiation
hardness and allows the implementation of accelerated readout circuits. The
TowerJazz CMOS process being one of the most relevant examples
recently became of interest for several future detector projects. The most
imminent of these project is an upgrade of the Inner Tracking System (ITS) of
the ALICE detector at LHC. It will be followed by the Micro-Vertex Detector
(MVD) of the CBM experiment at FAIR. Other experiments like ILD consider CPS as
one of the viable options for flavour tagging and tracking sub-systems
Pixel Detectors for Charged Particles
Pixel Detectors, as the current technology of choice for the innermost vertex
detection, have reached a stage at which large detectors have been built for
the LHC experiments and a new era of developments, both for hybrid and for
monolithic or semi-monolithic pixel detectors is in full swing. This is largely
driven by the requirements of the upgrade programme for the superLHC and by
other collider experiments which plan to use monolithic pixel detectors for the
first time. A review on current pixel detector developments for particle
tracking and vertexing is given, comprising hybrid pixel detectors for superLHC
with its own challenges in radiation and rate, as well as on monolithic,
so-called active pixel detectors, including MAPS and DEPFET pixels for RHIC and
superBelle.Comment: 19 pages, 23 drawings in 14 figure
Development of Single- and Double-sided Ladders for the ILD Vertex Detectors
We discuss two projects exploring the integration of thin CMOS pixel sensors
in order to prototype ladders matching the geometry needed for the ILD vertex
detector. The PLUME project has designed and fabricated full-size and fully
functional double- sided layers which currently reach 0.6 % X0 and aim for 0.3
% X0 in mid-2012. Another approach, SERNWIETE, consists in wrapping the sensors
in a polyimide-based micro-cable to obtain a supportless single-sided ladder
with a material budget around 0.15 % X0. First promising samples have been
produced and the full-size prototype is expected in spring 2012.Comment: International Workshop on Future Linear Colliders, LCWS 2011,
Granada, Spain, 2011, 26-30 Septembe
- …