Pressure-induced physical changes of noble gases implanted in highly stressed amorphous carbon films

Noble gases (Ar, Kr, and Xe) were trapped in an amorphous carbon matrix in the 1-11-GPa pressure range. Extended and near-edge x-ray-absorption spectroscopies indicate clustering of noble gases induced by the host matrix internal pressure. Simultaneously, the matrix pressure promotes a shift of the noble-gas core-level binding energy of similar to1 eV. The Auger parameter reveals that both the initial state and the host relaxation terms contribute to the binding-energy shift. Ab initio calculations performed on an Ar-7 cluster and on Ar atoms clustered in aromatic molecules support the experimental findings.68

The BINGO project: VII. Cosmological forecasts from 21 cm intensity mapping

Context. The 21 cm line of neutral hydrogen (HI) opens a new avenue in our exploration of the structure and evolution of the Universe. It provides complementary data to the current large-scale structure (LSS) observations with different systematics, and thus it will be used to improve our understanding of the Icold dark matter (ICDM) model. This will ultimately constrain our cosmological models, attack unresolved tensions, and test our cosmological paradigm. Among several radio cosmological surveys designed to measure this line, BINGO is a single-dish telescope mainly designed to detect baryon acoustic oscillations (BAOs) at low redshifts (0.127 < z < 0.449). Aims. Our goal is to assess the fiducial BINGO setup and its capabilities of constraining the cosmological parameters, and to analyze the effect of different instrument configurations. Methods. We used the 21 cm angular power spectra to extract cosmological information about the HI signal and the Fisher matrix formalism to study BINGO's projected constraining power. Results. We used the Phase 1 fiducial configuration of the BINGO telescope to perform our cosmological forecasts. In addition, we investigated the impact of several instrumental setups, taking into account some instrumental systematics, and different cosmological models. Combining BINGO with Planck temperature and polarization data, the projected constraint improves from a 13% and 25% precision measurement at the 68% confidence level with Planck only to 1% and 3% for the Hubble constant and the dark energy (DE) equation of state (EoS), respectively, within the wCDM model. Assuming a Chevallier- Polarski- Linder (CPL) parameterization, the EoS parameters have standard deviations given by w0 = 0.30 and wa = 1.2, which are improvements on the order of 30% with respect to Planck alone. We also compared BINGO's fiducial forecast with future SKA measurements and found that, although it will not provide competitive constraints on the DE EoS, significant information about HI distribution can be acquired. We can access information about the HI density and bias, obtaining 8.5% and 6% precision, respectively, assuming they vary with redshift at three independent bins. BINGO can also help constrain alternative models, such as interacting dark energy and modified gravity models, improving the cosmological constraints significantly. Conclusions. The fiducial BINGO configuration will be able to extract significant cosmological information from the HI distribution and provide constraints competitive with current and future cosmological surveys. It will also help in understanding the HI physics and systematic effects

The BINGO Project: III. Optical design and optimization of the focal plane

Context. The Baryon Acoustic Oscillations from Integrated Neutral Gas Observations (BINGO) telescope was designed to measure the fluctuations of the 21 cm radiation arising from the hyperfine transition of neutral hydrogen. It is also aimed at measuring the baryon acoustic oscillations (BAO) from such fluctuations, thereby serving as a pathfinder to future, deeper intensity mapping surveys. The requirements for the Phase 1 of the projects consider a large reflector system (two 40 m-class dishes in a crossed-Dragone configuration) illuminating a focal plane with 28 horns to measure the sky, with two circular polarizations in a drift scan mode to produce measurements of the radiation in intensity (I) as well as the circular (V) polarization. Aims. In this paper, we present the optical design for the instrument. We describe the optical arrangement of the horns in the focal plane to produce a homogeneous and well-sampled map after the end of Phase 1, as well as the intensity and polarization properties of the beams. Our analysis provides an optimal model for the location of the horns in the focal plane, producing a homogeneous and Nyquist-sampled map after the nominal survey time. Methods. We used the GRASP package to model the focal plane arrangement and performed several optimization tasks to arrive at the current configuration, including an estimation of the sidelobes corresponding to the diffraction patterns of the two mirrors. The final model for the focal plane was defined through a combination of neural network and other direct optimization methods. Results. We arrived at an optimal configuration for the optical system that includes the focal plane positioning and the beam behavior of the instrument. We present an estimate of the expected sidelobes both for intensity and polarization, as well as the effect of band averaging on the final sidelobes, as well as an estimation of the cross-polarization leakage for the final configuration. Conclusions. We conclude that the chosen optical design meets the requirements for the project in terms of polarization purity and area coverage as well as a homogeneity of coverage so that BINGO can perform a successful BAO experiment. We further conclude that the requirements on the placement and rms error on the mirrors are also achievable so that a successful experiment can be conducted

Cardiometabolic risk reduction through lifestyle intervention programs in the Brazilian public health system

Public health strategies to reduce cardiovascular morbidity and mortality should focus on global cardiometabolic risk reduction. The efficacy of lifestyle changes to prevent type 2 diabetes have been demonstrated, but low-cost interventions to reduce cardiometabolic risk in Latin-America have been rarely reported. Our group developed 2 programs to promote health of high-risk individuals attending a primary care center in Brazil. This study compared the effects of two 9-month lifestyle interventions, one based on medical consultations (traditional) and another with 13 multi-professional group sessions in addition to the medical consultations (intensive) on cardiometabolic parameters. Adults were eligible if they had pre-diabetes (according to the American Diabetes Association) and/or metabolic syndrome (International Diabetes Federation criteria for Latin-America). Data were expressed as means and standard deviations or percentages and compared between groups or testing visits. A p-value < 0.05 was considered significant. Results: 180 individuals agreed to participate (35.0% men, mean age 54.7 ± 12.3 years, 86.1% overweight or obese). 83 were allocated to the traditional and 97 to the intensive program. Both interventions reduced body mass index, waist circumference and tumor necrosis factor-α. Only intensive program reduced 2-hour plasma glucose and blood pressure and increased adiponectin values, but HDL-cholesterol increased only in the traditional. Also, responses to programs were better in intensive compared to traditional program in terms of blood pressure and adiponectin improvements. No new case of diabetes in intensive but 3 cases and one myocardial infarction in traditional program were detected. Both programs induced metabolic improvement in the short-term, but if better results in the intensive are due to higher awareness about risk and self-motivation deserves further investigation. In conclusion, these low-cost interventions are able to minimize cardiometabolic risk factors involved in the progression to type 2 diabetes and/or cardiovascular disease.FAPESP - Fundação de Apoio à Pesquisa do Estado de São PauloFAPESP Fundação de Apoio à Pesquisa do Estado de São Paul

The BINGO project: V. Further steps in component separation and bispectrum analysis

Context. Observing the neutral hydrogen distribution across the Universe via redshifted 21 cm line intensity mapping constitutes a powerful probe for cosmology. However, the redshifted 21 cm signal is obscured by the foreground emission from our Galaxy and other extragalactic foregrounds. This paper addresses the capabilities of the BINGO survey to separate such signals. Aims. We show that the BINGO instrumental, optical, and simulations setup is suitable for component separation, and that we have the appropriate tools to understand and control foreground residuals. Specifically, this paper looks in detail at the different residuals left over by foreground components, shows that a noise-corrected spectrum is unbiased, and shows that we understand the remaining systematic residuals by analyzing nonzero contributions to the three-point function. Methods. We use the generalized needlet internal linear combination, which we apply to sky simulations of the BINGO experiment for each redshift bin of the survey. We use binned estimates of the bispectrum of the maps to assess foreground residuals left over after component separation in the final map. Results. We present our recovery of the redshifted 21 cm signal from sky simulations of the BINGO experiment, including foreground components. We test the recovery of the 21 cm signal through the angular power spectrum at different redshifts, as well as the recovery of its non-Gaussian distribution through a bispectrum analysis. We find that non-Gaussianities from the original foreground maps can be removed down to, at least, the noise limit of the BINGO survey with such techniques. Conclusions. Our component separation methodology allows us to subtract the foreground contamination in the BINGO channels down to levels below the cosmological signal and the noise, and to reconstruct the 21 cm power spectrum for different redshift bins without significant loss at multipoles 20≲ l ≲ 500. Our bispectrum analysis yields strong tests of the level of the residual foreground contamination in the recovered 21 cm signal, thereby allowing us to both optimize and validate our component separation analysis

The BINGO project: IV. Simulations for mission performance assessment and preliminary component separation steps

Aims. The large-scale distribution of neutral hydrogen (HI) in the Universe is luminous through its 21 cm emission. The goal of the Baryon Acoustic Oscillations from Integrated Neutral Gas Observations (BINGO) radio telescope is to detect baryon acoustic oscillations at radio frequencies through 21 cm intensity mapping (IM). The telescope will span the redshift range 0.127<z<0.449 with an instantaneous field-of-view of 14.75 - 6.0. Methods. In this work we investigate different constructive and operational scenarios of the instrument by generating sky maps as they would be produced by the instrument. In doing this we use a set of end-to-end IM mission simulations. The maps will additionally be used to evaluate the efficiency of a component separation method (GNILC). Results. We have simulated the kind of data that would be produced in a single-dish IM experiment such as BINGO. According to the results obtained, we have optimized the focal plane design of the telescope. In addition, the application of the GNILC method on simulated data shows that it is feasible to extract the cosmological signal across a wide range of multipoles and redshifts. The results are comparable with the standard principal component analysis method

Fluid-structure interaction simulation of prosthetic aortic valves : comparison between immersed boundary and arbitrary Lagrangian-Eulerian techniques for the mesh representation

In recent years the role of FSI (fluid-structure interaction) simulations in the analysis of the fluid-mechanics of heart valves is becoming more and more important, being able to capture the interaction between the blood and both the surrounding biological tissues and the valve itself. When setting up an FSI simulation, several choices have to be made to select the most suitable approach for the case of interest: in particular, to simulate flexible leaflet cardiac valves, the type of discretization of the fluid domain is crucial, which can be described with an ALE (Arbitrary Lagrangian-Eulerian) or an Eulerian formulation. The majority of the reported 3D heart valve FSI simulations are performed with the Eulerian formulation, allowing for large deformations of the domains without compromising the quality of the fluid grid. Nevertheless, it is known that the ALE-FSI approach guarantees more accurate results at the interface between the solid and the fluid. The goal of this paper is to describe the same aortic valve model in the two cases, comparing the performances of an ALE-based FSI solution and an Eulerian-based FSI approach. After a first simplified 2D case, the aortic geometry was considered in a full 3D set-up. The model was kept as similar as possible in the two settings, to better compare the simulations' outcomes. Although for the 2D case the differences were unsubstantial, in our experience the performance of a full 3D ALE-FSI simulation was significantly limited by the technical problems and requirements inherent to the ALE formulation, mainly related to the mesh motion and deformation of the fluid domain. As a secondary outcome of this work, it is important to point out that the choice of the solver also influenced the reliability of the final results