104 research outputs found
A novel mixed valence form of Rhus vernicifera laccase and its reaction with dioxygen to give a peroxide intermediate bound to the trinuclear center
金沢大学理工研究域物質化学系Rhus vernicifera laccase, in a novel mixed valence state [T1oxT23red: type 1 Cu as Cu(II), and type 2 and 3 Cus as Cu(I)], was formed by reacting Cu(I) on the type 2 Cudepleted laccase [T1oxT3red: type 1 Cu as Cu(II) and type 3 Cus as Cu(I)] under argon. Contrary to T1oxT3red, T1oxT23red was highly reactive with dioxygen, and gave the three transient bands at 340, 475, and 680 nm due to the two-electron reduced form of dioxygen [charge transfer bands from peroxide to Cu(II)]. The first order decays were highly dependent on pH, which led to the successful detection of the intermediate for ca. 2 h at pH 7.5. Another mixed valence derivative, T12oxT3red [type 1 and type 2 Cus as Cu(II), and type 3 Cus as Cu(I)] prepared through the action of Cu(II) on T1oxT3red was not reactive with dioxygen, but showed high enzyme activity as to the oxidation of N,N-dimethyl-p-phenylenediamine. The whole reaction mechanism of the reduction of dioxygen by laccase was proposed based on the present results together with data for the former detection and characterization of the three-electron reduced form of dioxygen
Spectroscopic and magnetic studies of wild-type and mutant forms of the Fe(II)- and 2-oxoglutarate-dependent decarboxylase ALKBH4
The Fe(II)/2OG (2-oxoglutarate)-dependent dioxygenase superfamily comprises proteins that couple substrate oxidation to decarboxylation of 2OG to succinate. A member of this class of mononuclear non-haem Fe proteins is the Escherichia coli DNA/RNA repair enzyme AlkB. In the present work, we describe the magnetic and optical properties of the yet uncharacterized human ALKBH4 (AlkB homologue). Through EPR and UV–visible spectroscopy studies, we address the Fe-binding environment of the proposed catalytic centre of wild-type ALKBH4 and an Fe(II)-binding mutant. We could observe a novel unusual Fe(III) high-spin EPR-active species in the presence of sulfide with a gmax of 8.2. The Fe(II) site was probed with NO. An intact histidine-carboxylate site is necessary for productive Fe binding. We also report the presence of a unique cysteine-rich motif conserved in the N-terminus of ALKBH4 orthologues, and investigate its possible Fe-binding ability. Furthermore, we show that recombinant ALKBH4 mediates decarboxylation of 2OG in absence of primary substrate. This activity is dependent on Fe as well as on residues predicted to be involved in Fe(II) co-ordination. The present results demonstrate that ALKBH4 represents an active Fe(II)/2OG-dependent decarboxylase and suggest that the cysteine cluster is involved in processes other than Fe co-ordination
Recommended from our members
Graphene Acid for Lithium‐Ion Batteries—Carboxylation Boosts Storage Capacity in Graphene
Environmentally sustainable, low-cost, flexible, and lightweight energy storage technologies require advancement in materials design in order to obtain more efficient organic metal-ion batteries. Synthetically tailored organic molecules, which react reversibly with lithium, may address the need for cost-effective and eco-friendly anodes used for organic/lithium battery technologies. Among them, carboxylic group-bearing molecules act as high-energy content anodes. Although organic molecules offer rich chemistry, allowing a high content of carboxyl groups to be installed on aromatic rings, they suffer from low conductivity and leakage to the electrolytes, which restricts their actual capacity, the charging/discharging rate, and eventually their application potential. Here, a densely carboxylated but conducting graphene derivative (graphene acid (GA)) is designed to circumvent these critical limitations, enabling effective operation without compromising the mechanical or chemical stability of the electrode. Experiments including operando Raman measurements and theoretical calculations reveal the excellent charge transport, redox activity, and lithium intercalation properties of the GA anode at the single-layer level, outperforming all reported organic anodes, including commercial monolayer graphene and graphene nanoplatelets. The practical capacity and rate capability of 800 mAh g−1 at 0.05 A g−1 and 174 mAh g−1 at 2.0 A g−1 demonstrate the true potential of GA anodes in advanced lithium-ion batteries
Unveiling the potential of covalent organic frameworks for energy storage: Developments, challenges, and future prospects
Covalent organic frameworks (COFs) are porous structures emerging as promising electrode materials due to their high structural diversity, controlled and wide pore network, and amenability to chemical modifications. COFs are solely composed of periodically arranged organic molecules, resulting in lightweight materials. Their inherent properties, such as extended surface area and diverse framework topologies, along with their high proclivity to chemical modification, have positioned COFs as sophisticated materials in the realm of electrochemical energy storage (EES). The modular structure of COFs facilitates the integration of key functions such as redox‐active moieties, fast charge diffusion channels, composite formation with conductive counterparts, and highly porous network for accommodating charged energy carriers, which can significantly enhance their electrochemical performance. However, ascribing intricate porosity and redox‐active functionalities to a single COF structure, while maintaining long‐term electrochemical stability, is challenging. Efforts to overcome these hurdles embrace strategies such as the implementation of reversible linkages for structural flexibility, stimuli‐responsive functionalities, and incorporating chemical groups to promote the formation of COF heterostructures. This review focuses on the recent progress of COFs in EES devices, such as batteries and supercapacitors, through a meticulous exploration of the latest strategies aimed at optimizing COFs as advanced electrodes in future EES technologies
Metastable Ni(I)-TiO <sub>2-x</sub> Photocatalysts: Self-Amplifying H<sub>2</sub> Evolution from Plain Water without Noble Metal Co-Catalyst and Sacrificial Agent
Decoration of semiconductor photocatalysts with cocatalysts is generally done by a step-by-step assembly process. Here, we describe the self-assembling and self-activating nature of a photocatalytic system that forms under illumination of reduced anatase TiO2 nanoparticles in an aqueous Ni2+ solution. UV illumination creates in situ a Ni+/TiO2/Ti3+ photocatalyst that self-activates and, over time, produces H-2 at a higher rate. In situ X-ray absorption spectroscopy and electron paramagnetic resonance spectroscopy show that key to self-assembly and self-activation is the light-induced formation of defects in the semiconductor, which enables the formation of monovalent nickel (Ni+) surface states. Metallic nickel states, i.e., Ni-0, do not form under the dark (resting state) or under illumination (active state). Once the catalyst is assembled, the Ni+ surface states act as electron relay for electron transfer to form H-2 from water, in the absence of sacrificial species or noble metal cocatalysts.Web of Science14548261322612
Observation of magnetic vortex configuration in non-stoichiometric Fe3O4 nanospheres
Theoretical and micromagnetic simulation studies of magnetic nanospheres with vortex configurations suggest that such nanostructured materials have technological advantages over conventional nanosystems for applications based on high-power-rate absorption and subsequent emission. However, full experimental evidence of magnetic vortex configurations in spheres of submicrometer size is still lacking. Here, we report the microwave irradiation fabrication of Fe3O4 nanospheres and establish their magnetic vortex configuration based on experimental results, theoretical analysis, and micromagnetic simulations. Detailed magnetic and electrical measurements, together with Mössbauer spectroscopy data, provide evidence of a loss of stoichiometry in vortex nanospheres owing to the presence of a surface oxide layer, defects, and a higher concentration of cation vacancies. The results indicate that the magnetic vortex spin configuration can be established in bulk spherical magnetite materials. This study provides crucial information that can aid the synthesis of magnetic nanospheres with magnetically tailored properties; consequently, they may be promising candidates for future technological applications based on three-dimensional magnetic vortex structures
Surface-Confined Self-Assembly of Di-carbonitrile Polyphenyls
This Feature Article reports on the controlled formation and structure-functionality aspects of vacuum-deposited self-assembled organic and metal-organic networks at metal surfaces using ditopic linear and nonlinear molecular bricks, namely di-carbonitrile polyphenyls. Surface confined supramolecular organization of linear aromatic molecules leads to a fascinating variety of open networks. Moreover, cobalt-directed assembly of the same linear linkers reveals highly regular, open honeycomb networks with tunable pore sizes representing versatile templates for the organization of molecular guests or metal clusters and the control of supramolecular dynamers. In addition, the 2D nanopore organic networks act as arrays of quantum corrals exhibiting confinement of the surface-electronic states of the metallic substrate. A reduction of the linker symmetry leads to the formation of disordered, glassy coordination networks, which represent a structural model for amorphous materials
Engineering shape anisotropy of Fe3O4-¿-Fe2O3 hollow nanoparticles for magnetic hyperthermia
The use of microwave-assisted synthesis (in water) of a-Fe2O3 nanomaterials followed by their transformation onto iron oxide Fe3O4-¿-Fe2O3 hollow nanoparticles encoding well-defined sizes and shapes [nanorings (NRs) and nanotubes (NTs)] is henceforth described. The impact of experimental variables such as concentration of reactants, volume of solvent employed, and reaction times/temperatures during the shape-controlled synthesis revealed that the key factor that gated generation of morphologically diverse nanoparticles was associated to the initial concentration of phosphate anions employed in the reactant mixture. All the nanomaterials presented were fully characterized by powder X-ray diffraction, field emission scanning electron microscopy, Fourier transform infrared, Mössbauer spectroscopy, and superconducting quantum interference device (SQUID). The hollow nanoparticles that expressed the most promising magnetic responses, NTs and NRs, were further tested in terms of efficiencies in controlling the magnetic hyperthermia, in view of their possible use for biomedical applications, supported by their excellent viability as screened by in vitro cytotoxicity tests. These systems NTs and NRs expressed very good magneto-hyperthermia properties, results that were further validated by micromagnetic simulations. The observed specific absorption rate (SAR) and intrinsic loss power of the NRs and NTs peaked the values of 340 W/g and 2.45 nH m2 kg-1 (NRs) and 465 W/g and 3.3 nH m2 kg-1 (NTs), respectively, at the maximum clinical field 450 Oe and under a frequency of 107 kHz and are the highest values among those reported so far in the hollow iron-oxide family. The higher SAR in NTs accounts the importance of magnetic shape anisotropy, which is well-predicted by the modified dynamic hysteresis (ß-MDH) theoretical model
- …