61 research outputs found

    Enhanced optical coherence vibration tomography for subnanoscale-displacement-resolution calibration of piezoelectric actuators

    Get PDF
    We report a subnanoscale-displacement-resolution optical coherence vibration tomography (SOCVT) systemfor real-time calibration of piezoelectric actuators. The calibrations of the actuators at nanoscale or microscale displacement ranges were performed by varying the input voltage over the entire range in the ascending and descending directions. The computational and experimental results demonstrated that the developed SOCVT could be used to characterizethe dynamic hysteretic behaviour, nonlinear effect, and impulsive behaviour of piezoelectric actuators. The SOCVT technique is non-contact and non-invasive in nature, making it ideal for real-time and in situ ultra-precision calibration of piezoelectric actuators, which are widely used in active vibration control and nanopositioning

    Sine-modulated wavelength-independent full-range complex spectral optical coherence tomography with an ultra-broadband light source

    Get PDF
    We present a full-range complex spectral domain optical coherence tomography with an ultra-broadband light source based on sinusoidal modulation. For the sinusoidal modulation strategy, a lead zirconate titanate stack actuator is employed to achieve the sinusoidal vibration of a mirror and therefore to get a series of spectral interferogram with different phase delays. The purpose of this strategy is to get higher performance complex-conjugate artifact elimination. Bessel separation of the signal sequence at each wavelength of the spectrometer was used to reconstruct the real and imaginary components of interference fringes; however, the sinusoidal modulation method is independent of light source wavelength. The experimental results demonstrated that the method had an excellent performance in a complex-conjugate suppression of 50 dB for a full width at half maximum bandwidth of 236 nm, and it has better anti-artifact ability and more flexible range in phase shifting than the conventional wavelength-dependent phase-shifting method on a full-range complex spectral optical coherence tomography system. Furthermore, the effect of the hysteresis error of lead zirconate titanate actuators on the performance of complex-conjugate artifact elimination was investigated and the solution of lead zirconate titanate positioning performance for both conventional phase-shifting and sine-modulation methods was suggested

    High-mode spoof SPP of periodic metal grooves for ultra-sensitive terahertz sensing

    Get PDF
    We report terahertz surface plasmon resonance (SPR) sensing based on prism-coupling to the spoof surface plasmon polariton (SSPP) mode existing on periodically grooved metal films. It was demonstrated that, except for the fundamental mode of the SSPP, there was also a higher mode SSPP wave when the depth of groove was larger. Both fundamental and high-order modes of SSPP could be used for terahertz sensing. We compared the performance of different modes of SSPP on the sensing sensitivity using both reflection amplitude and phase-jump information. The results indicated that the gap distance between the prism base and the metal film had a significant influence on the reflectivity of SPR sensing by affecting the coupling efficiency of an evanescent wave to an SSPP wave; also, high-order mode SSPP-based sensing had a high sensitivity of up to 2.27 THz/RIU, which nearly doubled the sensitivity of the fundamental mode. The application of high-mode SSPP has enormous potential for ultra-sensitive SPR sensing in the terahertz regime

    Frequency-dependent circular-polarization of terahertz chiral spoof surface plasmon polariton on helically grooved metallic wire

    Get PDF
    Chiral spoof surface plasmon polaritons in the terahertz region, resulting from a coherent superposition of TM and HE modes, can be generated by normally exciting helically corrugated metal wire with a linearly polarized Gaussian light. The handedness of the chiral SPP depends on the handedness of the helical groove. The chirality of the surface wave causes a spiral spatial extent of average power whose period is determined by the difference in the wave vector between two modes. Simultaneously, highly circular polarization of a confined surface wave emerges from the chirality of the geometry. Moreover, the polarization state is heavily dependent on working frequency relative to the characteristic frequency of each mode. This type of chiral SPP, originating from the helical groove, makes helically corrugated metal wire useful for some special applications, such as circularly polarized sources for terahertz near-field microscopy or terahertz sensors for chiral biomolecules

    Two-dimensional optical coherence tomography for real-time structural dynamical characterization

    Get PDF
    We present a two-dimensional optical coherence vibration tomography (2DOCVT) system with an ultra-precision displacement resolution of ~0.1 nm that is capable of in site real-time absolute displacement measurement of structural line vibrations. Experimental results of sinusoidal, sweep and impulse vibrations were reported. The key figures of merit such as the 2DOCVT system could obtain fast line vibration measurement without scanning and it also could be used to capture structural modal parameters in one single impulse excitation measurement without any vibration excitation input information, making it attractive for the application in low-frequency vibration measurement and response-only modal analysis

    Elastic-plastic endochronic constitutive model of 0Crl7Ni4Cu4Nb stainless steels

    Get PDF
    We presented an elastic-plastic endochronic constitutive model of 0Crl7Ni4Cu4Nb stainless steel based on the plastic endochronic theory (which does not need the yield surface) and experimental stress-strain curves. The key feature of the model is that it can precisely describe the relation of stress and strain under various loading histories, including uniaxial tension, cyclic loading-unloading, cyclic asymmetric-stress axial tension and compression, and cyclic asymmetric-stress axial tension and compression. The effects of both mean stress and amplitude of stress on hysteresis loop based on the elastic-plastic endochronic constitutive model were investigated. Compared with the experimental and calculated results, it is demonstrated that there was a good agreement between the model and the experiments. Therefore, the elastic-plastic endochronic constitutive model provides a method for the accurate prediction of mechanical behaviors of 0Crl7Ni4Cu4Nb stainless steel subjected to various loadings

    Performance analysis of higher mode spoof surface plasmon polariton for terahertz sensing

    Get PDF
    We investigated the spoof surface plasmon polaritons (SSPPs) on 1D grooved metal surface for terahertz sensing of refractive index of the filling analyte through a prism-coupling attenuated total reflection setup. From the dispersion relation analysis and the finite element method-based simulation, we revealed that the dispersion curve of SSPP got suppressed as the filling refractive index increased, which cause the coupling resonance frequency redshifting in the reflection spectrum. The simulated results for testing various refractive indexes demonstrated that the incident angle of terahertz radiation has a great effect on the performance of sensing. Smaller incident angle will result in a higher sensitive sensing with a narrower detection range. In the meanwhile, the higher order mode SSPP-based sensing has a higher sensitivity with a narrower detection range. The maximum sensitivity is 2.57 THz/RIU for the second-order mode sensing at 45° internal incident angle. The proposed SSPP-based method has great potential for high sensitive terahertz sensing

    Nondestructive testing of marine protective coatings using terahertz waves with stationary wavelet transform

    Get PDF
    Terahertz wave propagation in marine protective coatings and its non-destructive testing (NDT) capability were studied by the finite difference time domain (FDTD) method. The FDTD model was used to calculate the propagation and reflection of THz radiation from marine protective coatings. The reflected terahertz waves could be employed in coating thickness analysis of the paint layers. In order to clearly identify the interface between antifouling and anticorrosive coatings, stationary wavelet transform (SWT) approach was applied to decompose the obtained terahertz impulse functions into approximation and detail coefficients; SWT detail coefficients were used for the feature extraction of the coating thickness. SWT provides a more accurate identification of salient features in a signal, such as the weak feature between antifouling and anticorrosive coatings. We found that the developed model and SWT-based algorithms could be used to evaluate the occurrence of defects beneath the coatings (e.g., paint-off and corrosion defects). The proposed method provides the solution for coating thickness of marine protective coatings and it would benefit the effective maintenance to avoid coating failure and facilitate marine protective coating design. Therefore, non-destructive testing and evaluation of marine protective coating system by terahertz waves with SWT could be recommended for engineering applications

    Impact of Processing Conditions on Inter-tablet Coating Thickness Variations Measured by Terahertz In-Line Sensing.

    Get PDF
    A novel in-line technique utilising pulsed terahertz radiation for direct measurement of the film coating thickness of individual tablets during the coating process was previously developed and demonstrated on a production-scale coater. Here, we use this technique to monitor the evolution of tablet film coating thickness and its inter-tablet variability during the coating process under a number of different process conditions that have been purposefully induced in the production-scale coating process. The changes that were introduced to the coating process include removing the baffles from the coater, adding uncoated tablets to the running process, halting the drum, blockage of spray guns and changes to the spray rate. The terahertz sensor was able to pick up the resulting changes in average coating thickness in the coating drum and we report the impact of these process changes on the resulting coating quality.This work was conducted with financial support from the UK Technology Strategy Board (AB293H). H.L. And J.A.Z. would like to acknowledge the Engineering and Physical Sciences Research Council (EP/L019922/1) and the Newton Trust Cambridge for research funding. J.A.Z. would like to thank Gonville & Caius College, Cambridge for a research fellowship. The authors acknowledge Colorcon Ltd. and Meggle AG for providing the excipients used in this study, Provel Ltd. (Bolton, UK) for the kind loan of the mixing equipment to disperse the coating polymer and Staffan Folestad (AstraZeneca) for useful discussions. Additional data related to this publication is available as a supplementary data to this publication as well as at the University of Cambridge data repository (https://www.repository.cam.ac.uk).This is the final version of the article. It first appeared from Wiley via http://dx.doi.org/10.1002/jps.2450
    • …
    corecore