1,514 research outputs found

    Vibrations of beams and rods carrying a moving mass

    Get PDF
    We study the vibration of slender one-dimensional elastic structures (beams, cables, wires, rods) under the effect of a moving mass or load. We first consider the classical small- deflection (Euler-Bernoulli) beam case, where we look at tip vibrations of a cantilever as a model for a barreled launch system. Then we develop a theory for large deformations based on Cosserat rod theory. We illustrate the effect of moving loads on large-deformation structures with a few cable and arch problems. Large deformations are found to have a resonance detuning effect on the cable. For the arch we find different failure modes depending on its depth: a shallow arch fails by in-plane collapse, while a deep arch fails by sideways flopping. In both cases the speed of the traversing load is found to have a stabilising effect on the structure, with failure suppressed entirely at sufficiently high speed

    Planar dynamics of large-deformation rods under moving loads

    Get PDF
    We formulate the problem of a slender structure (a rod) undergoing large deformation under the action of a moving mass or load motivated by inspection robots crawling along bridge cables or high-voltage power lines. The rod is described by means of geometrically exact Cosserat theory which allows for arbitrary planar flexural, extensional and shear deformations. The equations of motion are discretised using the generalised-α method. The formulation is shown to handle the discontinuities of the problem well. Application of the method to a cable and an arch problem reveals interesting nonlinear phenomena. For the cable problem we find that large deformations have a resonance detuning effect on cable dynamics. The problem also offers a compelling illustration of the Timoshenko paradox. For the arch problem we find a stabilising (delay) effect on the in-plane collapse of the arch, with failure suppressed entirely at sufficiently high speed

    Controlled electrochemical dissolution of anodic aluminum oxide for preparation of open-through pore structures

    Get PDF
    A simple electrochemical method is presented to remove the bottom barrier layer of anodic aluminum oxide (AAO). In this method, an electrolysis process was performed in neutral KCl solution with AAO as the cathode. By applying a suitable cathodic potential, electrolyte temperature, and electrolysis time, the bottom barrier layer can be selectively dissolved by the etching of OH(-)ions without disrupting the porous alumina structure. The cathodic polarization behavior was studied to illustrate the electrochemical dissolution mechanism and its influence on the AAO/Al electrode. This study provides broader potential applications of AAO in the fields of electronics, magnetics, photocatalysis, microsensors, and so on. (c) 2007 The Electrochemical Society.open112836sciescopu

    Immuno-targeting the multifunctional CD38 using nanobody

    Get PDF
    published_or_final_versio

    Spin-Imbalance in a One-Dimensional Fermi Gas

    Full text link
    Superconductivity and magnetism generally do not coexist. Changing the relative number of up and down spin electrons disrupts the basic mechanism of superconductivity, where atoms of opposite momentum and spin form Cooper pairs. Nearly forty years ago Fulde and Ferrell and Larkin and Ovchinnikov proposed an exotic pairing mechanism (FFLO) where magnetism is accommodated by formation of pairs with finite momentum. Despite intense theoretical and experimental efforts, however, polarized superconductivity remains largely elusive. Here we report experimental measurements of density profiles of a two spin mixture of ultracold 6Li atoms trapped in an array of one dimensional (1D) tubes, a system analogous to electrons in 1D wires. At finite spin imbalance, the system phase separates with an inverted phase profile in comparison to the three-dimensional case. In 1D we find a partially polarized core surrounded by wings composed of either a completely paired BCS superfluid or a fully polarized Fermi gas, depending on the degree of polarization. Our observations are in quantitative agreement with theoretical calculations in which the partially polarized phase is found to be a 1D analogue of the FFLO state. This study demonstrates how ultracold atomic gases in 1D may be used to create non-trivial new phases of matter, and also paves the way for direct observation and further study of the FFLO phase.Comment: 30 pages, 7 figure

    Simple Bronsted acid catalyzed C-H functionalization: efficient access to poly-substituted pyridines

    Get PDF
    An exceptionally simple and environmentally friendly methodology has been developed for directly functionalizing the benzylic C-H bond of the poly-substituted pyridines with aromatic imines. Simple Bronsted acid catalysts including salicylic acid and TsOH were successfully employed. Different types of poly-substituted pyridines could be efficiently obtained with moderate yields. Traditional ways to such types of pyridines involved the aromatization of the corresponding Hantzsch 1,4-dihydropyridines, while this method greatly simplified the synthetic procedures. (C) 2016 Elsevier Ltd. All rights reserved

    Promoting contraceptive use among unmarried female migrants in one factory in Shanghai: a pilot workplace intervention

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>In urban China, more single women are becoming pregnant and resorting to induced abortion, despite the wide availability of temporary methods of contraception. We developed and piloted a workplace-based intervention to promote contraceptive use in unmarried female migrants working in privately owned factories.</p> <p>Methods</p> <p>Quasi-experimental design. In consultation with clients, we developed a workplace based intervention to promote contraception use in unmarried female migrants in a privately owned factory. We then implemented this in one factory, using a controlled before-and-after design. The intervention included lectures, bespoke information leaflets, and support to the factory doctors in providing a contraceptive service.</p> <p>Results</p> <p>598 women participated: most were under 25, migrants to the city, with high school education. Twenty percent were lost when staff were made redundant, and implementation was logistically complicated. All women attended the initial lecture, and just over half the second lecture. Most reported reading the educational material provided (73%), but very few women reported using the free family planning services offered at the factory clinic (5%) or the Family Planning Institute (3%). At baseline, 90% (N = 539) stated that contraceptives were required if having sex before marriage; of those reporting sex in the last three months, the majority reporting using contraceptives (78%, 62/79) but condom use was low (44%, 35/79).</p> <p>Qualitative data showed that the reading material seemed to be popular and young women expressed a need for more specific reproductive health information, particularly on HIV/AIDS. Women wanted services with some privacy and anonymity, and views on the factory service were mixed.</p> <p>Conclusion</p> <p>Implementing a complex intervention with a hard to reach population through a factory in China, using a quasi-experimental design, is not easy. Further research should focus on the specific needs and service preferences of this population and these should be considered in any policy reform so that contraceptive use may be encouraged among young urban migrant workers.</p

    Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay

    Full text link
    The decay channel ψπ+πJ/ψ(J/ψγppˉ)\psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) is studied using a sample of 1.06×1081.06\times 10^8 ψ\psi^\prime events collected by the BESIII experiment at BEPCII. A strong enhancement at threshold is observed in the ppˉp\bar{p} invariant mass spectrum. The enhancement can be fit with an SS-wave Breit-Wigner resonance function with a resulting peak mass of M=186113+6(stat)26+7(syst)MeV/c2M=1861^{+6}_{-13} {\rm (stat)}^{+7}_{-26} {\rm (syst)} {\rm MeV/}c^2 and a narrow width that is Γ<38MeV/c2\Gamma<38 {\rm MeV/}c^2 at the 90% confidence level. These results are consistent with published BESII results. These mass and width values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics

    China’s urban methane emissions from municipal wastewater treatment plant

    Get PDF
    The increased number and capacity of municipal wastewater treatment plants (WWTPs) in China has driven the emission of methane (CH4). Few studies have focused on quantification of CH4 emissions from municipal WWTPs of different cities and analysis of socioeconomic factors influencing the quantity of emissions. Here we estimated CH4 emissions from WWTPs in China for 229 prefectural‐level cities, based on data from 2,019 working municipal WWTPs. The results show the total CH4 emissions to be 1,169.8 thousand tons (29.2 MtCO2e) in 2014, which is over three times that of the municipal WWTPs in the United States in 2016. Large cities along the east coast regions had larger CH4 emissions in absolute and per capita terms. Correlation analysis shows that cities with higher gross domestic product, household food consumption expenditure, or household consumption expenditure produced more degradable organics in wastewater, thus more CH4 emissions. Measures to control the sources of degradable organics and regulate WWTP processes with less emission factor are key to mitigate CH4 emissions. In addition to aerobic or anaerobic wastewater treatment systems, factors such as wastewater temperature, length of sewer, and the addition of nitrate that influencing emission factor are suggested to be involved in CH4 emission modeling
    corecore