5,037 research outputs found
Lack of correlation between constitutive and induced resistance to a herbivore in crucifer plants: real or flawed by experimental methods?
The correlation between constitutive and induced resistance to herbivores in plants has long been of interest to evolutionary biologists, and various approaches to determining levels of resistance have been used in this field of research. In this study, we examined the relationship between constitutive and induced resistance to the diamondback moth, Plutella xylostella (L.) (Lepidoptera: Plutellidae), in 11 closely related species of wild crucifers. We assessed the survival, development, and reproduction of the test insects and calculated their intrinsic rate of increase as an indicator of constitutive and induced resistance for the plants. We used larvae of P. xylostella and jasmonic acid as elicitors of the induced response. We failed to find a correlation between constitutive and induced resistance in these crucifer plants when the induction of resistance was initiated by either herbivory or jasmonic acid application. Analysis of the results suggests that the failure to detect a relationship between the two types of resistance could be caused by flaws in measuring constitutive resistance, which was apparently confounded with induced resistance. We discuss the difficulties and pitfalls in measuring constitutive resistance and ways to improve the methodology in investigating the relationships between constitutive and induced resistance in plant
History effect in inhomogeneous superconductors
A model was proposed to account for a new kind of history effect in the
transport measurement of a sample with inhomogeneous flux pinning coupled with
flux creep. The inhomogeneity of flux pinning was described in terms of
alternating weak pinning (lower jc) and strong pinning region (higher jc). The
flux creep was characterized by logarithmic barrier. Based on this model, we
numerically observed the same clockwise V-I loops as reported in references.
Moreover, we predicted behaviors of the V-I loop at different sweeping rates of
applied current dI/dt or magnetic fields Ba, etc. Electric transport
measurement was performed in Ag-sheathed Bi2-xPbxSr2Ca2Cu3Oy tapes immersed in
liquid nitrogen with and without magnetic fields. V-I loop at certain dI/dt and
Ba was observed. It is found that the area of the loop is more sensitive to
dI/dt than to Ba, which is in agreement well with our numerical results.Comment: To appear in Phys Rev B, October 1 Issu
Theoretical study of the two-proton halo candidate Ne including contributions from resonant continuum and pairing correlations
With the relativistic Coulomb wave function boundary condition, the energies,
widths and wave functions of the single proton resonant orbitals for Ne
are studied by the analytical continuation of the coupling constant (ACCC)
approach within the framework of the relativistic mean field (RMF) theory.
Pairing correlations and contributions from the single-particle resonant
orbitals in the continuum are taken into consideration by the resonant
Bardeen-Cooper-Schrieffer (BCS) approach, in which constant pairing strength is
used. It can be seen that the fully self-consistent calculations with NL3 and
NLSH effective interactions mostly agree with the latest experimental
measurements, such as binding energies, matter radii, charge radii and
densities. The energy of 2s orbital is slightly higher than that
of orbital, and the occupation probability of the
2s orbital is about 20%, which are in accordance with the
shell model calculation and three-body model estimation
Vector Meson Propagator and Baryon Current Conservation
If baryons couple only with -mesons, one found the baryon spectral
function may be negative. We show this unacceptable result is caused by the
-terms in the -meson propagator. Their contribution may
not vanish in approximate calculations which violate the baryon current
conserves. A rule is suggested, by which the calculated baryon spectral
function is well behaved.Comment: 9 pages (LaTeX file), 3 figures (PostScript file
The Maximum Mass of Star Clusters
When an universal untruncated star cluster initial mass function (CIMF)
described by a power-law distribution is assumed, the mass of the most massive
star cluster in a galaxy (M_max) is the result of the size-of-sample (SoS)
effect. This implies a dependence of M_max on the total number of star clusters
(N). The SoS effect also implies that M_max within a cluster population
increases with equal logarithmic intervals of age. This is because the number
of clusters formed in logarithmic age intervals increases (assuming a constant
cluster formation rate). This effect has been observed in the SMC and LMC.
Based on the maximum pressure (P_int) inside molecular clouds, it has been
suggested that a physical maximum mass (M_max[phys]) should exist. The theory
predicts that M_max[phys] should be observable, i.e. lower than M_max that
follows from statistical arguments, in big galaxies with a high star formation
rate. We compare the SoS relations in the SMC and LMC with the ones in M51 and
model the integrated cluster luminosity function (CLF) for two cases: 1) M_max
is determined by the SoS effect and 2) M_max=M_max[phys]=constant. The observed
CLF of M51 and the comparison of the SoS relations with the SMC and LMC both
suggest that there exists a M_max[phys] of 5*10^5 M_sun in M51. The CLF of M51
looks very similar to the one observed in the ``Antennae'' galaxies. A direct
comparison with our model suggests that there M_max[phys]=2*10^6 M_sun.Comment: 4 pages, contribution to "Globular Clusters: Guides to Galaxies",
March 6th-10th, 200
Coupled Dyson-Schwinger Equations and Effects of Self-Consistency
Using the model as an effective tool, the effects of
self-consistency are studied in some detail. A coupled set of Dyson-Schwinger
equations for the renormalized baryon and meson propagators in the model is solved self-consistently according to the dressed
Hartree-Fock scheme, where the hadron propagators in both the baryon and meson
self-energies are required to also satisfy this coupled set of equations. It is
found that the self-consistency affects the baryon spectral function
noticeably, if only the interaction with mesons is considered.
However, there is a cancellation between the effects due to the and
mesons and the additional contribution of mesons makes the
above effect insignificant. In both the and cases the
effects of self-consistency on meson spectral function are perceptible, but
they can nevertheless be taken account of without a self-consistent
calculation. Our study indicates that to include the meson propagators in the
self-consistency requirement is unnecessary and one can stop at an early step
of an iteration procedure to obtain a good approximation to the fully
self-consistent results of all the hadron propagators in the model, if an
appropriate initial input is chosen. Vertex corrections and their effects on
ghost poles are also studied.Comment: 20 pages (include 5 tables), 17 figures (PostScript file
Noise-robust method for image segmentation
Segmentation of noisy images is one of the most challenging problems in image analysis and any improvement of segmentation methods can highly influence the performance of many image processing applications. In automated image segmentation, the fuzzy c-means (FCM) clustering has been widely used because of its ability to model uncertainty within the data, applicability to multi-modal data and fairly robust behaviour. However, the standard FCM algorithm does not consider any information about the spatial linage context and is highly sensitive to noise and other imaging artefacts. Considering above mentioned problems, we developed a new FCM-based approach for the noise-robust fuzzy clustering and we present it in this paper. In this new iterative algorithm we incorporated both spatial and feature space information into the similarity measure and the membership function. We considered that spatial information depends on the relative location and features of the neighbouring pixels. The performance of the proposed algorithm is tested on synthetic image with different noise levels and real images. Experimental quantitative and qualitative segmentation results show that our method efficiently preserves the homogeneity of the regions and is more robust to noise than other FCM-based methods
Tumor suppressor in lung cancer-1 (TSLC1) functions as a glioma tumor suppressor
Tumor suppressor in lung cancer-1 (TSLC1) loss is common in many human cancers, including meningioma. In this study, we demonstrate that TSLC1 protein and RNA expression is lost in 60% to 65% of high-grade gliomas, and that TSLC1 reintroduction into glioma cells results in growth suppression. Moreover, Tslc1 loss in mice results in increased astrocyte proliferation in vivo and in vitro. These data indicate that TSLC1 functions as a glioma tumor suppressor. ©2006AAN Enterprises, Inc.Fil: Houshmandi, S.S.. Washington University in St. Louis; Estados UnidosFil: Surace, Ezequiel Ignacio. Washington University in St. Louis; Estados Unidos. Consejo Nacional de Investigaciones CientÃficas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Instituto de Investigaciones BioquÃmicas de Buenos Aires. Fundación Instituto Leloir. Instituto de Investigaciones BioquÃmicas de Buenos Aires; ArgentinaFil: Zhang, H.B.. Washington University in St. Louis; Estados UnidosFil: Fuller, G.N.. University of Texas; Estados UnidosFil: Gutmann, D.H.. Washington University in St. Louis; Estados Unido
Evaluating the Corrosion Level of Bare Steel Bars with Pitting Corrosionby DOFS
Steel corrosion is one of the main causes of the deterioration of reinforced concrete structures. Localized pitting corrosion of rebar is particularly harmful, as it can severely damage mechanical properties of steel rebar including both the load and deformation capacities. Moreover, unlike uniform corrosion which can give a warning by causing extensive longitudinal cracking, pitting corrosion is often more hidden with the absence of obvious corrosion cracks. Traditional non-destructive methods based on electrochemistry may encounter large errors when estimating the pitting corrosion level in concrete; as a result, more effective methods/tools are in necessity for a timely and accurate detection of localized pitting corrosion. This study investigates the ability of distributed optical fiber sensors (DOFS) to measure pitting corrosion of steel bars, which is based on the principle that pitting corrosion causes strain localization of steel bar under tension and DOFS enable to capture the strain distribution with high spatial resolution. DOFS were attached on bare steel bars, which have mechanical notches to simulate corrosion pits, to measure the strain distribution along the notched bars under direct tension. Through experiments, the present study explores the possibility of attaching DOFS on the surface of a steel bar to monitor its pitting corrosion, and the positive results are of interest to the development of non-destructive detection method of steel pitting corrosion in concrete structures. Further quantitative analysis is required to find the correlations between the strain distribution along the notched bars and notch geometries, so that the pitting corrosion level could be assessed from the monitored DOFS strains of rebar
- …