Bellingham Parks Volunteer Program Intern

The Bellingham Parks volunteer program is a part of the Bellingham Parks and Recreation department. The volunteer program is responsible for four main volunteer-based events/roles. The first is to set up and host volunteer work parties at different parks throughout Bellingham, which includes prepping the work party, setting everything and all required materials up, teaching volunteers how to carry out the work, maintaining a safe and fun environment, making sure people enjoy the work party and that everything is being done properly, and then cleaning up the work party once it is finished. The second is help set people up as Park Stewards. A Park Steward can be anyone who wants to adopt a park and are willing to devote time to caring for these areas

Habitat utilization by minke whales (Balaenoptera acutorostrata) in the St. Lawrence Estuary, Canada

Characteristics of minke whale (Balaenoptera acutorostrata) habitat at the head of the Laurentian Channel in the St. Lawrence Estuary, Canada were identified by quantifying environmental and temporal habitat variables and comparing them to the presence or absence of minke whales during the summer of 1996. Identification photographs of minke whales taken during the summers of 1995 and 1996 were used to examine intra-annual and year to year habitat use by individual minke whales. Minke whales were primarily distributed between the 50 m and 100 m bathymetric contours which corresponds to the ridge of the Laurentian Channel. This region is characterized by a steep slope in bottom topography which causes predictable accumulations of euphausiids and capelin (Mal lotus villosus), the principal prey species of minke whales. Tide phase, lunar phase and time of season, all of which cause slight fluctuations in prey abundance did not appear to have a significant influence on minke whale presence or movements. Individual minke whales exhibited site tenacity in returning to a localized area both within a season and in consecutive years

Sizes of walleye pollock (Theragra chalcogramma) and Atka mackerel (Pleurogrammus monopterygius) consumed by the western stock of Steller sea lions (Eumetopias jubatus) in Alaska from 1999 to 2000

Prey-size selectivity by Steller sea lions (Eumetopias jubatus) is relevant for understanding the foraging behavior of this declining predator, but studies have been problematic because of the absence and erosion of otoliths usually used to estimate fish length. Therefore, we developed regression formulae to estimate fish length from seven diagnostic cranial structures of walleye pollock (Theragra chalcogramma) and Atka mackerel (Pleurogrammus monopterygius). For both species, all structure measurements were related with fork length of prey (r2 range: 0.78−0.99). Fork length (FL) of walleye pollock and Atka mackerel consumed by Steller sea lions was estimated by applying these regression models to cranial structures recovered from scats (feces) collected between 1998 and 2000 across the range of the Alaskan western stock of Steller sea lions. Experimentally derived digestion correction factors were applied to take into account loss of size due to digestion. Fork lengths of walleye pollock consumed by Steller sea lions ranged from 3.7 to 70.8 cm (mean=39.3 cm, SD=14.3 cm, n=666) and Atka mackerel ranged from 15.3 to 49.6 cm (mean=32.3 cm, SD=5.9 cm, n=1685). Although sample sizes were limited, a greater proportion of juvenile (≤20 cm) walleye pollock were found in samples collected during the summer (June−September) on haul-out sites (64% juveniles, n=11 scats) than on summer rookeries (9% juveniles, n=132 scats) or winter (February−March) haul-out sites (3% juveniles, n=69 scats). Annual changes in the size of Atka mackerel consumed by Steller sea lions corresponded to changes in the length distribution of Atka mackerel resulting from exceptionally strong year classes. Considerable overlap (>51%) in the size of walleye pollock and Atka mackerel taken by Steller sea lions and the sizes of these species caught by the commercial trawl fishery were demonstrated

A method to improve size estimates of walleye pollock (Theragra chalcogramma) Atka mackerel (Pleurogrammus monopterygius) consumed by pinnipeds: digestion correction factors applied to bones and otoliths recovered in scats

The lengths of otoliths and other skeletal structures recovered from the scats of pinnipeds, such as Steller sea lions (Eumetopias jubatus), correlate with body size and can be used to estimate the length of prey consumed. Unfortunately, otoliths are often found in too few scats or are too digested to usefully estimate prey size. Alternative diagnostic bones are frequently recovered, but few bone-size to prey-size correlations exist and bones are also reduced in size by various degrees owing to digestion. To prevent underestimates in prey sizes consumed techniques are required to account for the degree of digestion of alternative bones prior to estimating prey size. We developed a method (using defined criteria and photo-reference material) to assign the degree of digestion for key cranial structures of two prey species: walleye pollock (Theragra chalcogramma) and Atka mackerel (Pleurogrammus monopterygius). The method grades each structure into one of three condition categories; good, fair or poor. We also conducted feeding trials with captive Steller sea lions, feeding both fish species to determine the extent of erosion of each structure and to derive condition-specific digestion correction factors to reconstruct the original sizes of the structures consumed. In general, larger structures were relatively more digested than smaller ones. Mean size reduction varied between different types of structures (3.3−26.3%), but was not influenced by the size of the prey consumed. Results from the observations and experiments were combined to be able to reconstruct the size of prey consumed by sea lions and other pinnipeds. The proposed method has four steps: 1) measure the recovered structures and grade the extent of digestion by using defined criteria and photo-reference collection; 2) exclude structures graded in poor condition; 3) multiply measurements of structures in good and fair condition by their appropriate digestion correction factors to derive their original size; and 4) calculate the size of prey from allometric regressions relating corrected structure measurements to body lengths. This technique can be readily applied to piscivore dietary studies that use hard remains of fish

Leisure, Popular Culture and Memory: The Invention of Dark Age Britain, Wales, England, and Middle-earth in the songs of Led Zeppelin

In the period of high modernity, and in the process of establishing the imperial nation-state of Great Britain, historians, archaeologists and enthusiastic amateurs searched high and low for material evidence and primary sources from what was called the Dark Ages. There is a gap in knowledge about this past, and all discussion rests on finding meaning in fading inscriptions, or dark earth, or trusting completely the writings of Bede and Gildas. The search for an identity and history for the nation for Great Britain was based on nationalist beliefs about Englishness, Britishness or Welshness. In the twentieth-century, the problem of Englishness, place and myth led Tolkien to write his Middle-earth stories in his leisure time. At the same time, the problem of Welshness or Britishness saw a growth in interest – in film and books - in Arthurian traditions, and a tourist interest in the Celtic fringe of Britain. In this paper, I show how the songs and album covers of Led Zeppelin, and their film The Song Remains the Same, draw upon both the work of Tolkien and the Arthurian traditions to construct ideas of masculine belonging in some mythological medieval time and place. While this constriction is idiosyncratic to the artists, they are drawing on and justifying the wider problem of England, Wales and Britain in leisure and culture

CO2 adsorption on agricultural biomass combustion ashes

Carbon capture and storage has become an alternative means of confronting global warming. Further research and development into adequate and low-cost materials is required for CO2 adsorption technologies.Samples of fly ash, bottom ash and their respective pellets, produced from wheat bran combustion, were characterized and tested to assess their capacity for CO2 adsorption at different temperatures. Neither the ashes nor their pellets were subject to prior thermochemical activation.The bottom ash sample and its pellets showed a higher adsorption capacity for the majority of the temperatures studied. The pelletized bottom ash reached the maximum adsorption capacity (0,07 mmol CO2/g), followed by the non-pelletized bottom ash (0,06 mmol CO2/g); both at an adsorption temperature of 25°C.CO2 adsorption of bottom ash, from the combustion of wheat bran (agricultural biomass), by a physical adsorption mechanism was demonstrated whereas with the fly ash sample, CO2 adsorption by both physical and chemical adsorption mechanisms was identified

3D printed masks for powders and viruses safety protection using food grade polymers: Empirical tests

The production of 3D printed safety protection devices (SPD) requires particular attention to the material selection and to the evaluation of mechanical resistance, biological safety and surface roughness related to the accumulation of bacteria and viruses. We explored the possibility to adopt additive manufacturing technologies for the production of respirator masks, responding to the sudden demand of SPDs caused by the emergency scenario of the pandemic spread of SARS‐COV‐ 2. In this study, we developed different prototypes of masks, exclusively applying basic additive manufacturing technologies like fused deposition modeling (FDM) and droplet‐based precision extrusion deposition (db‐PED) to common food packaging materials. We analyzed the resulting mechanical characteristics, biological safety (cell adhesion and viability), surface roughness and resistance to dissolution, before and after the cleaning and disinfection phases. We showed that masks 3D printed with home‐grade printing equipment have similar performances compared to the industrial‐grade ones, and furthermore we obtained a perfect face fit by customizing their shape. Finally, we developed novel approaches to the additive manufacturing post‐processing phases essential to assure human safety in the production of 3D printed custom medical devices

Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing

3D printing has the unique ability to produce porous pharmaceutical solid dosage forms on-demand. Although using porosity to alter drug release kinetics has been proposed in the literature, the effects of porosity on the swellable and erodible porous solid dosage forms have not been explored. This study used a model formulation containing hypromellose acetate succinate (HPMCAS), polyethylene oxide (PEO) and paracetamol and a newly developed hot melt droplet deposition 3D printing method, Arburg plastic free-forming (APF), to examine the porosity effects on in vitro drug release. This is the first study reporting the use of APF on 3D printing porous pharmaceutical tablets. With the unique pellet feeding mechanism of APF, it is important to explore its potential applications in pharmaceutical additive manufacturing. The pores were created by altering the infill percentages (%) of the APF printing between 20 to 100% to generate porous tablets. The printing quality of these porous tablets were examined. The APF printed formulation swelled in pH 1.2 HCl and eroded in pH 6.8 PBS. During the dissolution at pH 1.2, the swelling of the printing pathway led to the gradual decreases in the open pore area and complete closure of pores for the tablets with high infills. In pH 6.8 buffer media, the direct correlation between drug release rate and infills was observed for the tablets printed with infill at and less than 60%. The results revealed that drug release kinetics were controlled by the complex interplay of the porosity and dynamic changes of the tablets caused by swelling and erosion. It also implied the potential impact of fluid hydrodynamics on the in vitro data collection and interpretation of porous solids