Tailoring of magnetic properties of NiO/Ni composite particles fabricated by pulsed laser irradiation

We present NiO/Ni composite particles with face-centered cubic (fcc) structure prepared by a pulsed laser irradiation of NiO nanoparticles dispersed in liquid. The sizes of particles and the Ni content in NiO/Ni composites were controlled by tuning the laser parameters, such as laser fluence and irradiation time. We found that the weight fraction of Ni has a significant impact on magnetic properties of composite particles. Large exchange bias (HEB) and coercivity field (HC) were observed at 5 K due to the creation of heterojunctions at interfaces of ferromagnetic Ni and antiferromagnetic NiO. For the NiO/Ni composites with 80% of NiO we have observed the largest values of exchange bias (175 Oe) and coercive field (950 Oe), but the increase of Ni weight fraction resulted in the decrease of both HC and HEB values

Controlling exchange bias in Fe3O4/FeO composite particles prepared by pulsed laser irradiation

Spherical iron oxide nanocomposite particles composed of magnetite and wustite have been successfully synthesized using a novel method of pulsed laser irradiation in ethyl acetate. Both the size and the composition of nanocomposite particles are controlled by laser irradiation condition. Through tuning the laser fluence, the Fe3O4/FeO phase ratio can be precisely controlled, and the magnetic properties of final products can also be regulated. This work presents a successful example of the fabrication of ferro (ferri) (FM)/antiferromagnetic (AFM) systems with high chemical stability. The results show this novel simple method as widely extendable to various FM/AFM nanocomposite systems

Bimetal CuFe Nanoparticles—Synthesis, Properties, and Applications

Bimetal CuFe (copper-iron) nanoparticles, which are based on the earth-abundant and inexpensive metals, have generated a great deal of interest in recent years. The possible modification of the chemical and physical properties of these nanoparticles by changing their size, structure, and composition has contributed to the development of material science. At the same time, the strong tendency of these elements to oxidize under atmospheric conditions makes the synthesis of pure bimetallic CuFe nanoparticles still a great challenge. This review reports on different synthetic approaches to bimetallic CuFe nanoparticles and bimetallic CuFe nanoparticles supported on various materials (active carbide, carbide nanotubes, silica, graphite, cellulose, mesoporous carbide), their structure, physical, and chemical properties, as well as their utility as catalysts, including electrocatalysis and photocatalysis

Molecular dynamics simulation of ternary Cu-Fe-O submicrometer particle formation by pulsed laser irradiation process of colloidal suspensions

International audienc

Determining the Composite Structure of Au-Fe-Based Submicrometre Spherical Particles Fabricated by Pulsed-Laser Melting in Liquid

Submicrometre spherical particles made of Au and Fe can be fabricated by pulsed-laser melting in liquid (PLML) using a mixture of Au and iron oxide nanoparticles as the raw particles dispersed in ethanol, although the detailed formation mechanism has not yet been clarified. Using a 355 nm pulsed laser to avoid extreme temperature difference between two different raw particles during laser irradiation and an Fe2O3 raw nanoparticle colloidal solution as an iron source to promote the aggregation of Au and Fe2O3 nanoparticles, we performed intensive characterization of the products and clarified the formation mechanism of Au-Fe composite submicrometre spherical particles. Because of the above two measures (Fe2O3 raw nanoparticle and 355 nm pulsed laser), the products—whether the particles are phase-separated or homogeneous alloys—basically follow the phase diagram. In Fe-rich range, the phase-separated Au-core/Fe-shell particles were formed, because quenching induces an earlier solidification of the Fe-rich component as a result of cooling from the surrounding ethanol. If the particle size is small, the quenching rate becomes very rapid and particles were less phase-separated. For high Au contents exceeding 70% in weight, crystalline Au-rich alloys were formed without phase separation. Thus, this aggregation control is required to selectively form homogeneous or phase-separated larger submicrometre-sized particles by PLML

Comparison of picosecond and nanosecond lasers for the synthesis of TiN sub-micrometer spherical particles by pulsed laser melting in liquid

In this study, TiN sub-micrometer spherical particles were fabricated by pulsed laser melting in liquid using picosecond and nanosecond lasers applied to colloidal nanoparticles. The sizes of the obtained sub-micrometer spherical particles decreased as the pulse width decreased from nanoseconds to picoseconds. Furthermore, the laser fluence required for fabricating sub-micrometer spherical particles by irradiation was lower with a picosecond laser than with a nanosecond laser. This result suggests that the heat loss from the particles during pulsed laser heating is lower with shorter laser pulse durations. Therefore, picosecond laser irradiation is an energy-efficient method for fabricating sub-micrometer spherical particles

Synthesis of Au-Based Porous Magnetic Spheres by Selective Laser Heating in Liquid

We report the synthesis of Au-based submicrometer-sized spherical particles with uniform morphology/size and integrated porosity-magnetic property in a single particles. The particles are synthesized by a two-step process: (a) selective pulsed laser heating of colloidal nanoparticles to form particles with Au-rich core and Fe-rich shell and (b) acid treatment which leads to formation of porous architecture on particle surface. The simple, fast, inexpensive technique that is proposed demonstrates very promising perspectives for synthesis of composite particles