36 research outputs found
Etiosurgery of total post-burn limbal deficiency by allogeneic limb transplantation
Purpose: Analysis of results of allolimbal fragments transportation, conserved by normothermia
within 21-28 days, in post-burn corneal leukoma and recurrent pterygiums.
Methods: Allolimbal fragments transplantation, conserved by normothermia, was performed in 16
eyes, 6 eyes were with post-burn corneal leukoma, and was combined with penetrating
keratoplasty. In 10 eyes with recurrent pterygiums was performed allolimbal transplantation, in
which on the limb area within the dissected body of the pterygium were fitted limbal transplants
and fixed by interrupted sutures. Limbus allotransplantants conservation was performed in the
modified environment DMEM/F12 with glutamine, insulin, dexamethasone, embryonal serum,
HEPES and antibiotic-antimycotics composition in terms of CO2-incubator at 37° C, 95% of
humidity and 5% of CO2, and for 21-28 days.
Results: After keratoplasty in the post-burn corneal leukomas in the early postoperative period the
transplantant epithelialization was observed in the epithelial graft for 7-14 days, due to the limbus
transplants epithelium. Within 6 months after the surgery, corneal transplants has been remained
transparent. After allolimbal transplantation any relapses in patients with recurrent pterygiums was
not observed, patients` observation has been currently continuing. Conservation of limbus
allotranslantants allows significantly increase the number and activity MSC-like limbus cells and
significantly reduce the concentrations of histocompatibility antigens in transplantants, that allows
not to use immunosuppressive therapy in the postoperative period.
Conclusions: Combined performing of penetrating keratoplasty and allolimbal fragments
transplantation, conserved by normothermia within 21-28 days, significantly increases the percent
of corneal transparent retention. Allolimbal fragments transplantation, conserved by normothermia
within 21-28 days, in recurrent pterygium - pathogenetically reasonable treatment method, which
doesn’t require immunosuppressive therapy. Eliminating sectoral limbus deficiency, it creates a
barrier to the growth of the conjunctiva
Determination of optimum law lift element lining the manipulator of tunnel stacker
Получены новые закономерности подъема элементов обделки манипулятором тоннельного укладчика. Определен оптимальный закон перемещения элементов обделки на заданную высоту.Obtain new regularities of lifting lining elements using the manipulator tun‐nel stacker. The optimal law of displacement elements lining a predetermined height was
determined
Qualitative analysis of changes in the posterior segment of the eye wich femtosecond laser–assisted cataract surgery
Purpose: Analysis of the qualitative changes in the posterior eye segment structures – choroid
thickness (CT) and distance height of vitreous posterior hyaloid membrane (VPHM) from retina by
spectral optical coherence tomography (SOCT) method in femtosecond laser–assisted cataract
surgery (FLACS).
Methods and Materials: 46 eyes with immature cataract and retinal SOCT possibility before the
operation. Average corrected visual acuity – 0.3±0.05; eye length - 22.51±0.9 mm; IOP – 20 mm
Hg; age - 65 years. Before and after surgery (1, 3, 5 days), SOCT of vitreoretinal interface and
choroid was performed, RTVue XR 100 «Avanti», Optovue. Group 1, 24 patients, ultrasound FEM
of cataract, «Stellaris», B&L. Group 2, 22 patients – FLACS, LenSx, Alcon. Capsulorhexix
diameter – 4.9-5.2 mm (energy 12.5 μJ). Fragmentation of the lens nucleus by «chop», «cylinder»
methods (energy 10-15 μJ). The main corneal incision – 2.5 mm (energy 5 μJ). Phakoaspiration on
«Stellaris», elastic IOLs were implanted. FLACS duration – 9-10 minutes, femtolaser effect ≤
2 minutes.
Results: Before the surgery CT in Group 1 was 253.1±62.1 microns. In 1, 3, 5 days after FEM of
cataract CT were 310.4, 262.7, 258.1 microns. Distance height of VPHM before the surgery was
400.1 microns. In 1, 3, 5 days after surgery – 505.6, 492.7, 500.3 microns.
In Group 2 before the surgery CT was 256.4±60.3 microns. In 1, 3, 5 days after FLACS CT were
333.1, 279.4, 259.1 microns. Distance height of VPHM before the surgery – 366.2 microns. In 1, 3,
5 days after FLACS – 510.8, 506.2, 508.9 microns.
Reactive thickening of the choroid after surgery was determined in both groups. Group 1, 1th day –
57.3 microns (22.6%). By the 5th day CT became initial. Distance height of VPHM increased by
105.5microns. By the 5th day the situation was not changed. Group 2, FLACS, thickening of CT
per 1 day is 76.7 microns, (29.9%). By the 5th day CT returned to previous values. VPHM was
increased by 144.6 microns. By the 5th day the situation was not changed.
Conclusion: Increase of TC and distance height of VPHM in the early postoperative period was
noticed in the both groups. After FLACS big figures are conditioned apparently by intraoperative
vacuum effect and/or sudden IOP changes during femtolaser stage. Return of CT to initial state
indicates processes reversibility. Patients with vitreomacular adhesion when FLEC are highly risky
of vitreomacular traction
Standard operating procedure of medical actions for afte endophthalmitis after cataract surgery
Introduction. The introduction of the stage of femtolaser assistance in microinvasive cataract
surgery has qualitatively improved the optical results. The risk of postoperative endophthalmitis
has decreased, but is not excluded due to the persistence of surgical invasion as a whole. Acute
development of endophthalmitis requires well-coordinated regulated actions of all the medical
staff of the clinic.
Purpose. Prospective development of a regulated algorithm - a standard of an operating procedure
(SOP), the actions of ophthalmologists of a hospital in case of early postoperative posterior uveitis,
endophthalmitis.
Methods. The recommendations of the European (ESCRS Guidelines for Prevention and
Treatment of Endophthalmitis Following Cataract Surgery, 2013) and Russian (2015) levels,
relevant specialized scientific articles were used. When developing the SOP, the method of
"brainstorming" was applied by a working group of mixed composition: ophthalmologists,
diagnosticians, surgeons; pharmacists, doctors of clinical laboratory diagnostics, ophthalmic
anesthesiologists.
Results. The result of this development was the SOP, approved by the administration of the clinic,
with a phased schedule of actions for residents, on weekends - for doctors on duty, clinics, starting
with the initial diagnosis: posterior uveitis, endophthalmitis. I - performing a diagnostic complex,
visometry, biomicro- and ophthalmoscopy, mandatory eye sonography; drug therapy, according
to ophthalmological status. II - during the first 2 hours, a medical consultation, including a
vitreoretinal surgeon, to determine the need, timing and volume of surgery. III - within an hour
scan of the operating room, preoperative preparation of the patient. IV - performing the operation
in the time and volume determined by the medical council, sampling biomaterial for the analysis
of flora, antibiotic sensitivity. V - medical supervision of the patient, pharmacotherapy according
to the current ophthalmological status. This SOP was used in 6 patients with early postoperative
posterior uveitis (4 eyes) and endophthalmitis (2 eyes). Timely surgical interventions - rinsing the
anterior chamber of the eye and the introduction of an antibiotic (3 eyes), vitreous surgery (2 eyes),
in all cases stopped the intraocular inflammatory process while maintaining the VA of ≥ 0.1
UCVA.
Conclusion. The use of SOP in current clinical practice provides timely and successful surgical
and drug relief of early postoperative endophthalmitis during cataract surgery
Determination of cutting temperature while milling titanium alloy by face mills
В роботі наведений аналіз особливостей процесу високошвидкісного різання, яке головним чином пов'язують з температурою різання в залежності від швидкості обробки. Разом з ти, показано, що в залежності від конструкції та розмірів інструменту основний критерій зниження температури різання не завжди характеризує високошвидкісну обробку. Причиною цього є підвищення температури до значень, при яких можлива зміна властивостей поверхневого шару оброблюваного матеріалу. З метою визначення температури різання при обробці титанових сплавів, було проведене моделювання процесу торцевого фрезерування методом скінченних елементів дисковою фрезою Ø160. Визначені значення температури на контактних поверхня при швидкостях різання від 80 до 250 м/хв. В даному діапазоні швидкостей обробки спостерігається зростання температури різання. Встановлено, що при швидкостях різання вище 80 м/хв на поверхні оброблюваної заготовки виникають температури, при яких утворюється крихкий шар. Результати моделювання були перевірені експериментально при фрезеруванні титанового сплаву ВТ6.In this article, the analysis process features high-speed cutting, which mainly attributed to the cutting temperatures depending on the speed of processing. Shows that depending on the design and tool size main criterion decrease temperature cutting not always characterized by high-speed processing. The reason for this is the rise temperature to values at which to change properties of the materials surface layer. To determine the cutting temperature of titanium alloys processing, we carried mechanical milling process simulation with mill Ø160 by finite element method. Defined temperature on contact surfaces at cutting speeds between 80 and 250 m/min. In this range of speed observed temperature cutting increase. Established, with cutting speeds higher 80 m/min workpiece surface have temperature at which the fragile layer formed. The simulation results verified experimentally in the milling of titanium alloy VT6.В работе приведен анализ особенностей процесса высокоскоростного резания, которое главным образом связывают с температурой резания в зависимости от скорости резания. Вместе с тем, показано, что в зависимости от конструкции и размеров инструмента основной критерий снижения температуры резания не всегда характеризирует высокоскоростную обработку. Причиной этого есть повышение температуры до значений, при которых возможны изменения свойств поверхностного слоя обрабатываемого материала. С целью определения температуры резания при обработке титанового сплава, было проведено моделирование процесса торцевого фрезерования методом конечных элементом дисковой фрезой Ø160. Определены значения температуры на контактных поверхностях при скоростях резания от 80 до 250 м/мин. В этом диапазоне скоростей обработки наблюдается повышение температуры резания. Установлено, что при скоростях резания выше 80 м/мин на поверхности обрабатываемой заготовки возникают температуры, при которых образуется хрупкий шар. Результаты моделирования были проверены экспериментально при фрезеровании титанового сплава ВТ6
МОДЕЛЬ ВИЗНАЧЕННЯ ТОПОЛОГІЇ МЕРЕЖІ ЕЛЕКТРОПОСТАЧАННЯ
We propose a model for defining the mains topology based on evaluation of mains improvement by changing the topology in certain areas, as well as the algorithm for determining the mains routing.Предложена модель определения топологии сети на основе использования оценки улучшения варианта схемы при изменении топологии в отдельных зонах, а также алгоритм определения пути прокладки магистрали.Запропоновано модель визначення топології мережі на основі використання оцінки поліпшення варіанту схеми при зміні топології в окремих зонах, а також алгоритм визначення шляху прокладання магістралі
Terahertz radiation in ophthalmology (review)
Terahertz (THz) radiation is one of the new, intensively studied interdisciplinary fi elds of scientifi c knowledge, including medicine, in the fi rst decades of the 21st century. At the beginning of this article (review), in a brief form, the basic statements on THz radiation, the main parameters and properties are presented; the modern THz biophtonics technologies used in biology and medicine are considered – THz refl ectometry, THz spectroscopy methods. Then a number of directions and examples of possible use of THz technologies in biology and medicine, including pharmaceuticals, are given. The main part of the review presents the progress of experimental research and the prospects for the clinical application of medical technologies of THz spectroscopy, THz imaging, in ophthalmology in the study of the morphological and functional state of the ocular surface structures, diagnosis, medical testing, and treatment of ophthalmopathology of the ocular surface. The article concludes with a review of experimental studies on the safety of using THz waves for medical diagnostics and treatment of ophthalmopathology. In the fi nal part, the main problems and prospects of introducing medical THz technologies into the clinical practice of an ophthalmologist are considered
The development of a concept project unloading complex in a сoal terminal in the software SOLIDWORKS
Разработана компьютерная компоновочная модель разгрузочного комплекса. Произведено моделирование движения машин и узлов, соответствующее технологическим процессам протекающим при работе комплекса.A computer layout model of the unloading complex was designed. Motions of machines and units, corresponding to technological process operates when the complex works were simulated
DEVELOPMENT OF AN AUTONOMOUS INTELLIGENCE UNIT FOR A MOBILE NATURAL GAS CONCENTRATION ANALYZER
We have developed an autonomous reconnaissance and return system for a mobile natural gas concentration analyzer for use on offshore platforms in the Arctic