3,446 research outputs found
Introduction to Graphene Electronics -- A New Era of Digital Transistors and Devices
The speed of silicon-based transistors has reached an impasse in the recent
decade, primarily due to scaling techniques and the short-channel effect.
Conversely, graphene (a revolutionary new material possessing an atomic
thickness) has been shown to exhibit a promising value for electrical
conductivity. Graphene would thus appear to alleviate some of the drawbacks
associated with silicon-based transistors. It is for this reason why such a
material is considered one of the most prominent candidates to replace silicon
within nano-scale transistors. The major crux here, is that graphene is
intrinsically gapless, and yet, transistors require a band-gap pertaining to a
well-defined ON/OFF logical state. Therefore, exactly as to how one would
create this band-gap in graphene allotropes is an intensive area of growing
research. Existing methods include nano-ribbons, bilayer and multi-layer
structures, carbon nanotubes, as well as the usage of the graphene substrates.
Graphene transistors can generally be classified according to two working
principles. The first is that a single graphene layer, nanoribbon or carbon
nanotube can act as a transistor channel, with current being transported along
the horizontal axis. The second mechanism is regarded as tunneling, whether
this be band-to-band on a single graphene layer, or vertically between adjacent
graphene layers. The high-frequency graphene amplifier is another talking point
in recent research, since it does not require a clear ON/OFF state, as with
logical electronics. This paper reviews both the physical properties and
manufacturing methodologies of graphene, as well as graphene-based electronic
devices, transistors, and high-frequency amplifiers from past to present
studies. Finally, we provide possible perspectives with regards to future
developments.Comment: This is an updated version of our review article, due to be published
in Contemporary Physics (Sept 2013). Included are updated references, along
with a few minor corrections. (45 pages, 19 figures
Sputter ejection of matter from Io
The direct collisional interaction of magnetospheric particles with Io will lead to sputtering of atoms and molecules from the satellite into circum-Jovian space. The ∼520-eV S (and ∼260-eV O) ions composing the Io torus are the most effective agents for net sputter removal of matter from the satellite. An incident flux of ∼10^(10) cm^(−2) s^(−1) is estimated to provide ∼5 × 10^(10) S atoms cm^(−2) s^(−1) from sputtering of a (dayside) atmosphere with an exobase at a few hundred kilometers and up to ∼10^(12) S atoms cm^(−2) s^(−1) from an atmosphere at 1500°K with an exobase at ∼2.2 R_(Io). The supply of S (and O) required to stabilize the torus has been estimated by others to be from 10^(10) to 10^(12) cm^(−2) s^(−1). If Na and K are present in the atmosphere at a concentration level of 1%, the corresponding sputtering rates are calculated to be a few times 10^8 cm^(−2) s^(−1) for an exobase at several hundred kilometers. These numbers are large enough to supply the 10^7 cm^(−2) s^(−1) fluxes required to maintain the Na and K clouds. Sputtering can also remove heavy molecules, like Sn, from the atmosphere. At night, direct S sputtering of the unprotected surface is calculated to eject S and Na (1% concentration) at rates given approximately by ∼10^(10) and ∼10^8 cm^(−2) s^(−1), respectively. All atomic species residing on the surface must be ejected into circum-Jovian space at a rate approximately proportional to their (surface) abundances, if direct surface sputtering occurs, so that the particle content of the inner Jovian magnetosphere should map rather faithfully all species present on Io's surface. The processes of plume sputtering, avalanche cascading, and ionic saltation may lead to spatial and temporal variations in the number of ejected particles
A blockchain-IoT platform for the smart pallet pooling management
Pallet management as a backbone of logistics and supply chain activities is essential to supply chain parties, while a number of regulations, standards and operational constraints are considered in daily operations. In recent years, pallet pooling has been unconventionally advocated to manage pallets in a closed-loop system to enhance the sustainability and operational effectiveness, but pitfalls in terms of service reliability, quality compliance and pallet limitation when using a single service provider may occur. Therefore, this study incorporates a decentralisation mechanism into the pallet management to formulate a technological eco-system for pallet pooling, namely Pallet as a Service (PalletaaS), raised by the foundation of consortium blockchain and Internet of things (IoT). Consortium blockchain is regarded as the blockchain 3.0 to facilitate more industrial applications, except cryptocurrency, and the synergy of integrating a consortium blockchain and IoT is thus investigated. The corresponding layered architecture is proposed to structure the system deployment in the industry, in which the location-inventory-routing problem for pallet pooling is formulated. To demonstrate the values of this study, a case analysis to illustrate the human–computer interaction and pallet pooling operations is conducted. Overall, this study standardises the decentralised pallet management in the closed-loop mechanism, resulting in a constructive impact to sustainable development in the logistics industry
Exact solution and interfacial tension of the six-vertex model with anti-periodic boundary conditions
We consider the six-vertex model with anti-periodic boundary conditions
across a finite strip. The row-to-row transfer matrix is diagonalised by the
`commuting transfer matrices' method. {}From the exact solution we obtain an
independent derivation of the interfacial tension of the six-vertex model in
the anti-ferroelectric phase. The nature of the corresponding integrable
boundary condition on the spin chain is also discussed.Comment: 18 pages, LaTeX with 1 PostScript figur
Composite grid and finite-volume LU implicit scheme for turbine flow analysis
A composite grid was generated in an attempt to improve grid quality for a typical turbine blade with large camber in terms of mesh control, smoothness, and orthogonality. This composite grid consists of the C grid (or O grid) in the immediate vicinity of the blade and the H grid in the upstream region and in the middle of the blade passage between the C grids. It provides a good boundary layer resolution around the leading edge region for viscous calculation, has orthogonality at the blade surface and slope continuity at the C-H (or O-H) interface, and has flexibility in controlling the mesh distribution in the upstream region without using excessive grid points. This composite grid eliminates the undesirable qualities of a single grid when generated for a typical turbine geometry. A finite-volume lower-upper (LU) implicit scheme can be used in solving for the turbine flows on the composite grid. This grid has a special grid node that is connected to more than four neighboring nodes in two dimensions and to more than six nodes in three dimensions. But the finite-volume approach poses no problem at the special point because each interior cell has only four neighboring cells in two dimensions and only six cells in three dimensions. The finite-volume LU implicit scheme was demonstrated to be robust and efficient for both external and internal flows in a broad flow regime
Identification of oxygen-rich late/post-asymptotic giant branch stars and water fountains via maser and infrared criteria
The transitional phase between the asymptotic giant branch (AGB) and post-AGB phases holds the key to our understanding of the late-stage metamorphosis of intermediate-mass stars. In particular, high velocity jets forming during this phase are suggested to contribute significantly to the shaping of planetary nebulae. For oxygen-rich stars, the rare "water fountains (WFs)" have been regarded as representative objects in this phase, and it is important to identify more of them for further studies. Here we briefly report the results of our latest OH and H2O maser surveys in which a new WF candidate (IRAS 19356+0754) was found. We also performed radiative transfer modelling on the spectral energy distributions (SEDs) of all known WFs. It is concluded that WFs might in fact not be the transitional objects, as opposed to previous belief. WFs could be AGB or post-AGB stars with no obvious similarities amongst their SEDs. Further efforts are still needed to improve the identification criteria.This work is supported by a grant awarded to JN from the Research Grants Council of Hong Kong (project code: HKU 703308P; HKU 704209P; HKU 704710P)
Patient motivation and adherence to post-surgery rehabilitation exercise recommendations: The influence of physiotherapists’ autonomy supportive behaviors
Objective: To investigate the impact of physiotherapists' autonomy-supportive behaviors on patients' motivation and rehabilitation adherence after anterior cruciate ligament (ACL) reconstruction surgery. Design: Retrospective study. Setting: Outpatient orthopedic clinic of a university medical center. Participants: Postsurgery ACL reconstruction patients (N=115; minimum postsurgery interval, 6mo; mean ± SD postsurgery interval, 1.77±0.8y). Interventions: Not applicable. Main Outcome Measures: Questionnaires measuring autonomy support from physiotherapists (Health Care Climate Questionnaire), treatment motivation (Treatment Self-Regulation Questionnaire), and rehabilitation adherence (adapted from the Sport Injury Rehabilitation Adherence Scale and the Patient Self-Report Scales of Their Home-Based Rehabilitation Adherence). Results: Structural equation modeling analyses revealed that patients' treatment motivation mediated the relationship between physiotherapists' autonomy-supportive behaviors and rehabilitation adherence. Autonomy-supportive behavior positively predicted autonomous treatment motivation (β=.22, P<.05). Rehabilitation adherence (R2=.28) was predicted positively by autonomous motivation (β=.64, P<.05) and negatively predicted by controlled motivation (β=−.28, P<.05). Conclusions: These preliminary findings are promising and provide an empirical basis for further research to test the efficacy of autonomy support training designed to increase patients' rehabilitation adherence
Do water fountain jets really indicate the onset of the morphological metamorphosis of circumstellar envelopes?
Small-scale bipolar jets with short dynamical ages from 'water-fountain' (WF) sources are regarded as an indication of the onset of circumstellar envelope morphological metamorphosis of intermediate-mass stars. Such a process usually happens at the end of the asymptotic giant branch (AGB) phase. However, recent studies found that WFs could be AGB stars or even early planetary nebulae. This fact prompted the idea that WFs may not necessarily be objects at the beginning of the morphological transition process. In the present work, we show that WFs could have different envelope morphologies by studying their spectral energy distribution profiles. SomeWFs have spherical envelopes that resemble usual AGB stars, while others have aspherical envelopes, which are more common to post-AGB stars. The results imply that WFs may not represent the earliest stage of morphological metamorphosis. We argue further that the dynamical age of a WF jet, which can be calculated from maser proper motions, may not be the real age of the jet. The dynamical age cannot be used to justify the moment when the envelope begins to become aspherical, nor to tell the concrete evolutionary status of the object. A WF jet could be the innermost part of a larger well-developed jet, which is not necessarily a young jet. © 2016 The Authors
Position-dependent mass models and their nonlinear characterization
We consider the specific models of Zhu-Kroemer and BenDaniel-Duke in a
sech-mass background and point out interesting correspondences with the
stationary 1-soliton and 2-soliton solutions of the KdV equation in a
supersymmetric framework.Comment: 8 Pages, Latex version, Two new references are added, To appear in
J.Phys.A (Fast Track Communication
- …