1,317 research outputs found

    The luminosity function of Swift long gamma-ray bursts

    Get PDF
    The accumulation of Swift observed gamma-ray bursts (GRBs) has gradually made it possible to directly derive a GRB luminosity function (LF) from the observational luminosity distribution. However, two complexities are involved: (i) the evolving connection between GRB rate and cosmic star formation rate; and (ii) observational selection effects due to telescope thresholds and redshift measurements. With a phenomenological investigation of these two complexities, we constrain and discriminate two popular competing LF models (i.e. the broken-power-law LF and the single-power-law LF with an exponential cut-off at low luminosities). As a result, we find that the broken-power-law LF may be more favoured by observations, with a break luminosity L b= 2.5 × 10 52ergs -1 and prior- and post-break indices ν 1= 1.72 and ν 2= 1.98. Regarding an extra evolution effect expressed by a factor (1 +z) δ, if the metallicity of GRB progenitors is lower than ~0.1Z ⊙ as expected by some collapsar models, then there may be no extra evolution effect other than the metallicity evolution (i.e. δ approaches zero). Alternatively, if we remove the theoretical metallicity requirement, then a relationship between the degenerate parameters δ and Z max can be found, very roughly, δ~ 2.4(Z max/Z ⊙- 0.06). This indicates that extra evolution could become necessary for relatively high metallicities. © 2011 The Authors Monthly Notices of the Royal Astronomical Society © 2011 RAS.published_or_final_versio

    Morphology Analysis and Characteristics Evaluation of Typical Super Abrasive Grits in Micron Scale

    Get PDF
    Distribution characterization of geometry shape and size of abrasive grits with high quality in tight size band and exact pattern is crucial for modern tool manufacturer to make fine powder abrasive tool and other powder tools, but complex to be classified and evaluated accurately due to the lack of scientific method. In contrast to industrial methods with sieving mesh size or simplified projection criteria with circumscribed (inscribed or escribed) circle or rectangle, a set of new systemic criteria is developed and validated by measuring three representative grits samples in micron scale under 2D/3D microscopy platform. The features of micron abrasive grits under morphology classification include total four groups, six subgroups and eighteen sub-types in consideration of spatial geometry and statistical size distribution. For grinding performance analysis and simulation, it would be better to use a set of dominant volumetric geometries rather than use single simple geometry. Furthermore, the significance of abrasive grits geometries in grinding performance is discussed

    Bio-Inspired Aggregation Control of Carbon Nanotubes for Ultra-Strong Composites

    Full text link
    High performance nanocomposites require well dispersion and high alignment of the nanometer-sized components, at a high mass or volume fraction as well. However, the road towards such composite structure is severely hindered due to the easy aggregation of these nanometer-sized components. Here we demonstrate a big step to approach the ideal composite structure for carbon nanotube (CNT) where all the CNTs were highly packed, aligned, and unaggregated, with the impregnated polymers acting as interfacial adhesions and mortars to build up the composite structure. The strategy was based on a bio-inspired aggregation control to limit the CNT aggregation to be sub 20--50 nm, a dimension determined by the CNT growth. After being stretched with full structural relaxation in a multi-step way, the CNT/polymer (bismaleimide) composite yielded super-high tensile strengths up to 6.27--6.94 GPa, more than 100% higher than those of carbon fiber/epoxy composites, and toughnesses up to 117--192 MPa. We anticipate that the present study can be generalized for developing multifunctional and smart nanocomposites where all the surfaces of nanometer-sized components can take part in shear transfer of mechanical, thermal, and electrical signals

    Development and validation study of a non-alcoholic fatty liver disease risk scoring model among adults in China

    Get PDF
    Background: Non-alcoholic fatty liver disease (NAFLD) is one of the most common liver diseases in China. It is usually asymptomatic and transabdominal ultrasound (USS) is the usual means for diagnosis, but it may not be feasible to have USS screening of the whole population. Objective: To develop a risk scoring model for predicting the presence of NAFLD using parameters that can be easily obtain in clinical settings. Methods: A retrospective study on the data of 672 adults who had general health check including a transabdominal ultrasound. Fractional polynomial and multivariable logistic regressions of sociodemographic and biochemical variables on NAFLD were used to identify the predictors. A risk score was assigned to each predictor using the scaled standardized β-coefficient to create a risk prediction algorithm. The accuracy for NAFLD detection by each cut-off score in the risk algorithm was evaluated. Results: The prevalence of NAFLD in our study population was 33.0% (222/672). Six significant factors were selected in the final prediction model. The areas under the curve (AUC) was 0.82 (95% CI: 0.78–0.85). The optimal cut-off score, based on the ROC was 35, with a sensitivity of 76.58% (95% CI: 70.44–81.98%) and specificity of 74.89% (95% CI: 70.62–78.83%). Conclusion: A NAFLD risk scoring model can be used to identify asymptomatic Chinese people who are at risk of NAFLD for further USS investigation.published_or_final_versio

    Urban energy consumption and CO2 emissions in Beijing: current and future

    Get PDF
    This paper calculates the energy consumption and CO2 emissions of Beijing over 2005–2011 in light of the Beijing’s energy balance table and the carbon emission coefficients of IPCC. Furthermore, based on a series of energy conservation planning program issued in Beijing, the Long-range Energy Alternatives Planning System (LEAP)-BJ model is developed to study the energy consumption and CO2 emissions of Beijing’s six end-use sectors and the energy conversion sector over 2012–2030 under the BAU scenario and POL scenario. Some results are found in this research: (1) During 2005–2011, the energy consumption kept increasing, while the total CO2 emissions fluctuated obviously in 2008 and 2011. The energy structure and the industrial structure have been optimized to a certain extent. (2) If the policies are completely implemented, the POL scenario is projected to save 21.36 and 35.37 % of the total energy consumption and CO2 emissions than the BAU scenario during 2012 and 2030. (3) The POL scenario presents a more optimized energy structure compared with the BAU scenario, with the decrease of coal consumption and the increase of natural gas consumption. (4) The commerce and service sector and the energy conversion sector will become the largest contributor to energy consumption and CO2 emissions, respectively. The transport sector and the industrial sector are the two most potential sectors in energy savings and carbon reduction. In terms of subscenarios, the energy conservation in transport (TEC) is the most effective one. (5) The macroparameters, such as the GDP growth rate and the industrial structure, have great influence on the urban energy consumption and carbon emissions

    Solvothermal Synthesis of Ternary Sulfides of Sb2 − xBixS3(x = 0.4, 1) with 3D Flower-Like Architectures

    Get PDF
    Flower-like nanostructures of Sb2 − xBixS3(x = 0.4, 1.0) were successfully prepared using both antimony diethyldithiocarbamate [Sb(DDTC)3] and bismuth diethyldithiocarbamate [Bi(DDTC)3] as precursors under solvothermal conditions at 180 °C. The prepared Sb2 − xBixS3 with flower-like 3D architectures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED). The flower-like architectures, with an average diameter of ~4 μm, were composed of single-crystalline nanorods with orthorhombic structures. The optical absorption properties of the Sb2 − xBixS3 nanostructures were investigated by UV–Visible spectroscopy, and the results indicate that the Sb2 − xBixS3 compounds are semiconducting with direct band gaps of 1.32 and 1.30 eV for x = 0.4 and 1.0, respectively. On the basis of the experimental results, a possible growth mechanism for the flower-like Sb2 − xBixS3 nanostructures is suggested

    Stage-Dependent Tolerance of the German Cockroach, Blattella germanica for Dichlorvos and Propoxur

    Get PDF
    Stage-dependent dichlorvos and propoxur tolerance in a field population of the German cockroach, Blattella germanica Linnaeus (Blatodea: Blattellidae), was investigated in the laboratory using a topical application bioassay. The results showed the 6 week-old nymphs were more tolerant to dichlorvos and propoxur than the other ages tested. LD50 values of dichlorvos and propoxur for the 6 week-old nymphs were 2.003 µµg per insect and 5.296 µµg per insect, respectively. Tolerance ratios of 18.55-fold and 4.98-fold for LD50 were obtained from 6-week-old nymphs compared to 4 week-old nymphs. The specific activity of acetylcholinesterase (AChE) from 1 week-old nymphs was the highest among all tested developmental stages of nymphs and adult males and females. The specific activity of AChE decreased significantly with increasing age. The sensitivity of AChE to dichlorvos was the highest with a ki value of 3.12××104 mol-1min-1 in the last nymphal stage of B. germanica (about 6 weeks-old). The AChE from 4 week-old nymphs was the most sensitive to propoxur, with the highest ki value being 2.63××105 mol-1min-1. These results indicated that the different developmental stages and sexes of B. germanica affected the inhibition of AChE by dichlorvos and propoxur

    Continuous Regional Arterial Infusion with Fluorouracil and Octreotide Attenuates Severe Acute Pancreatitis in a Canine Model

    Get PDF
    Aim: To investigate the therapeutic effects of fluorouracil (5-Fu) and octreotide (Oct) continuous regional arterial infusion (CRAI,) alone or in combination, was administered in a canine model of severe acute pancreatitis (SAP). Materials and Methods: The animals were divided into five groups; group A (Sham), group B (SAP), group C (SAP and 5-Fu), group D (SAP and Oct), and group E (SAP and 5-Fu + Oct). Levels of amylase, alpha-tumor necrosis factor (TNF-alpha), blood urea nitrogen (BUN), creatinine, thromboxane B2 and 6-keto-prostaglandin F1 alpha were measured both before and after the induction of SAP. Pathologic examination of the pancreas and kidneys was performed after termination of the study. Results: Pathologic changes noted in the pancreas in SAP significantly improved following CRAI with either single or combined administration of 5-Fu and Oct, where combination therapy demonstrated the lowest injury score. All treatment groups had significantly lower levels of serum TNF-alpha and amylase activity (P<0.05), though only groups D and E had a lower BUN level as compared to group B. The plasma thromboxane B-2 level increased in SAP, but the ratio of thromboxane B-2/6-keto-prostaglandin F-1 alpha decreased in the treatment groups, with the combination therapy (group E) demonstrating the lowest ratio as compared to the other 3 experimental groups (P<0.05). Conclusions: The findings in the present study demonstrate an attenuation of SAP in a canine model following CRAI administration with 5-Fu or Oct, alone or in combination

    Low Sensitivity of the Formol-Ethyl Acetate Sedimentation Concentration Technique in Low-Intensity Schistosoma japonicum Infections

    Get PDF
    Schistosoma japonicum is parasitic fluke (worm) found in China, Indonesia and the Philippines. A lot of effort has been put into combating the parasite, and the result has been a large drop in the number of infected people over the last decades. The average infected person also now has few worms, and hence excretes few eggs in stool. This has made it increasingly difficult to get a correct diagnosis by the diagnostic tests traditionally used. Tests based on detecting eggs in stool can be false-negative and tests detecting antibodies can be false-positive due to persisting antibodies or antibodies from other worm infections. Hence there is a need for new diagnostic strategies. Formol-ethyl acetate sedimentation concentration is a technique for detecting eggs in stool by microscopy, but has not to our knowledge been evaluated for S. japonicum. We compared the technique, using a single stool sample and a commercial preparation kit, with three tests traditionally used in the endemic countries (Kato-Katz thick smear, hatching test and indirect hemagglutination antibody detection). The sedimentation technique detected disappointing few positives and seems not to be an advantage in the diagnosis of low-intensity S. japonicum infection, compared to the traditionally used tests
    corecore