Trust your instincts:The relationship between intuitive decision making and happiness

Epstein (1994; 2003) proposed that there are two cognitive information processing systems that operate in parallel: the intuitive thinking style and the rational thinking style. Decisional fit occurs when the preferred thinking style is applied to making a decision and research has shown that this fit increases the value of the outcome of a decision. Additionally, decisional fit leads to less regret, even when post hoc evaluations show the decision to be incorrect. It has not yet been determined whether decisional fit correlates with greater happiness and hence, the purpose of the current study was to investigate the difference between styles of thinking, styles of decision making and the impact of decisional fit on happiness scores. Individual differences in thinking and decision style were measured using an online interactive questionnaire (N = 100), and an ANOVA, hierarchical multiple regression, and a series of t-tests, were used to investigate the relationship between thinking style, decision style, decisional fit, and happiness, thereby addressing a gap in the existing literature. The major findings from the current study show that intuitive thinking has a strong positive correlation with happiness; that intuitive thinkers are more likely to utilize intuitive decisional style, than rational thinkers; and that when both rational and intuitive thinkers experienced decisional fit, higher ratings of happiness were reported. Explanations and recommendations for future studies are outlined in the discussion

Structural shift and increasing variety in Korea, 19602010 : empirical evidence of the economic development model by the creation of new sectors

In this paper, we examine the experiences of the Korean economy alongside theoretical knowledge of economic development and structural change. To demonstrate the generalized hypotheses on structural change, inputoutput tables of Korea, from 1960 to 2010, were analyzed. Our interest in taking time series of inputoutput tables originates from the following two issues. Firstly, we raise the question of whether Korean industrial structure changes have followed a certain pattern of structural shifts as well as increasing variety. Secondly, if so, it is questioned how the meso-level conditions for economic development could be explained from such a pattern. To search for answers, we adopt a model of the economic development by the creation of new sectors, named TEVECON, as our theoretical framework. Using this growth model, we derive hypotheses about how the structural change could affect economic development, and then we determine how the empirical analysis of the Korean economy verifies and deepens our understanding of structural change and economic development. This paper contributes to the empirical validation of the theoretical knowledge of economic development by the emergence of key sectors and the creation of new industries

Crack-Resistance Behavior of an Encapsulated, Healing Agent Embedded Buffer Layer on Self-Healing Thermal Barrier Coatings

In this work, a novel thermal barrier coating (TBC) system is proposed that embeds silicon particles in coating as a crack-healing agent. The healing agent is encapsulated to avoid unintended reactions and premature oxidation. Thermal durability of the developed TBCs is evaluated through cyclic thermal fatigue and jet engine thermal shock tests. Moreover, artificial cracks are introduced into the buffer layer’s cross section using a microhardness indentation method. Then, the indented TBC specimens are subject to heat treatment to investigate their crack-resisting behavior in detail. The TBC specimens with the embedded healing agents exhibit a relatively better thermal fatigue resistance than the conventional TBCs. The encapsulated healing agent protects rapid large crack openings under thermal shock conditions. Different crack-resisting behaviors and mechanisms are proposed depending on the embedding healing agents

Crack-Growth Behavior in Thermal Barrier Coatings with Cyclic Thermal Exposure

Crack-growth behavior in yttria-stabilized zirconia-based thermal barrier coatings (TBCs) is investigated through a cyclic thermal fatigue (CTF) test to understand TBCs’ failure mechanisms. Initial cracks were introduced on the coatings’ top surface and cross section using the micro-indentation technique. The results show that crack length in the surface-cracked TBCs grew parabolically with the number of cycles in the CTF test. Failure in the surface-cracked TBC was dependent on the initial crack length formed with different loading levels, suggesting the existence of a threshold surface crack length. For the cross section, the horizontal crack length increased in a similar manner as observed in the surface. By contrast, in the vertical direction, the crack did not grow very much with CTF testing. An analytical model is proposed to explain the experimentally-observed crack-growth behavior

The limited immunomodulatory effects of escharectomy on the kinetics of endotoxin, cytokines, and adhesion molecules in major burns.

Escharectomy has been shown to improve the survival rates and the outcomes in burns. This observational study was conducted to assess the role of escharectomy on the inflammatory mediators in major burns. Seventeen ASA physical status II or status III adult surviving major burn patients were recruited. When the escharectomy was scheduled, a series of blood samples was obtained at -3 and -1 days preoperation, and +1 and +3 postoperation. The changing levels of endotoxin, cytokines, and adhesion molecules were measured with a quantitative sandwich immunoassay. Extensive escharectomy did not appear to have any significant impact on the levels of tumor necrosis factor alpha, interleukin-10, soluble intracellular adhesion molecule-1 and soluble vascular adhesion molecule-1. Meanwhile, endotoxin and E-selectin were significantly decreased after escharectomy. Escharectomy appeared to have a limited immunomodulatory effect on the inflammatory mediators in systemic inflammatory responses induced by major burns. This is probably related to the timing and extent of surgery, and the complex nature of burn-related inflammation

Thermal durability and fracture behavior of layered Yb-Gd-Y-based thermal barrier coatings in thermal cyclic exposure

The effects of structural design on the thermal durability and fracture behavior of Yb-Gd-Y-based thermal barrier coatings (TBCs) were investigated through thermal cyclic exposure tests, such as furnace cyclic thermal fatigue (FCTF) and jet engine thermal shock (JETS) tests. The effects of composition in the bond coat and feedstock purity for the buffer layer on its lifetime performance were also examined. To overcome the drawbacks of Yb-Gd-Y-based material with inferior thermal durability due to poor mechanical properties and low coefficient of thermal expansion, a buffer layer was introduced in the Yb-Gd-Y-based TBC systems. In FCTF tests, the TBCs with the buffer layer showed a longer lifetime performance than those without the buffer layer, showing the longest thermal durability in the TBC with the Co-Ni-based bond coat and the buffer layer of regular purity. In JETS tests, the TBC with the Ni-based bond coat and the buffer layer of high purity showed a sound condition after 2000 cycles, showing better thermal durability for TBC with the Co-Ni-based bond coat rather than that with the Ni-based bond coat in the single layer coating without the buffer layer. The buffer layer effectively enhanced the thermal durability in slow temperature change (in the FCTF test), while the bond-coat composition and the feedstock purity for the buffer layer were found to be important factor to improve the thermal durability of the TBC in fast temperature change (in the JEET test). Finally, these research findings allow us to control the structure, composition, and feedstock purity in TBC system for improving the thermal durability in cyclic thermal environments

Actin Cytoskeleton and Golgi Involvement in Barley stripe mosaic virus Movement and Cell Wall Localization of Triple Gene Block Proteins.

Barley stripe mosaic virus (BSMV) induces massive actin filament thickening at the infection front of infected Nicotiana benthamiana leaves. To determine the mechanisms leading to actin remodeling, fluorescent protein fusions of the BSMV triple gene block (TGB) proteins were coexpressed in cells with the actin marker DsRed: Talin. TGB ectopic expression experiments revealed that TGB3 is a major elicitor of filament thickening, that TGB2 resulted in formation of intermediate DsRed:Talin filaments, and that TGB1 alone had no obvious effects on actin filament structure. Latrunculin B (LatB) treatments retarded BSMV cell-to-cell movement, disrupted actin filament organization, and dramatically decreased the proportion of paired TGB3 foci appearing at the cell wall (CW). BSMV infection of transgenic plants tagged with GFP-KDEL exhibited membrane proliferation and vesicle formation that were especially evident around the nucleus. Similar membrane proliferation occurred in plants expressing TGB2 and/or TGB3, and DsRed: Talin fluorescence in these plants colocalized with the ER vesicles. TGB3 also associated with the Golgi apparatus and overlapped with cortical vesicles appearing at the cell periphery. Brefeldin A treatments disrupted Golgi and also altered vesicles at the CW, but failed to interfere with TGB CW localization. Our results indicate that actin cytoskeleton interactions are important in BSMV cell-to-cell movement and for CW localization of TGB3

Fracture behavior and thermal durability of lanthanum zirconate-based thermal barrier coatings with buffer layer in thermally graded mechanical fatigue environments

The effects of buffer layer on the fracture behavior and lifetime performance of lanthanum zirconate (La2Zr2O7; LZO)-based thermal barrier coatings (TBCs) were investigated through thermally graded mechanical fatigue (TGMF) tests, which are designed to simulate the operating conditions of rotating parts in gas turbines. To improve the thermal durability of LZO-based TBCs, composite coats consisting of two feedstock powders of LZO and 8 wt% yttria-doped stabilized zirconia (8YSZ) were prepared by mixing different volume ratios (50:50 and 25:75, respectively). The composite coat of 50:50 volume ratio was employed as the top coat, and two types of buffer layers were introduced (25:75 volume ratio in LZO and 8YSZ, and 8YSZ only). These TBC systems were compared with a reference TBC system of 8YSZ. The TGMF tests with a tensile load of 60 MPa were performed for 1000 cycles, at a surface temperature of 1100 °C and a dwell time of 10 min, and then the samples were cooled at room temperature for 10 min in each cycle. For the single-layer TBCs, the composite top coat showed similar results as for the reference TBC system. The triple-layer coating (TLC) showed the best thermal cycle performance among all samples, suggesting that the buffer layer was efficient in improving lifetime performance. Failure modes were different for the TBC systems. Delamination and/or cracks were created at the interface between the bond and top coats or above the interface in the single-layer TBCs, but the TBCs with the buffer layer were delaminated and/or cracked at the interface between the buffer layer and the top coat, independent of buffer layer species. This study allows further understanding of the LZO-based TBC failure mechanisms in operating conditions, especially in combined thermal and mechanical environments, in order to design reliable TBC systems

Pancreas ductal adenocarcinoma with cystic features on cross-sectional imaging: radiologic-pathologic correlation

Most pancreatic ductal adenocarcinomas (PDAs) show solid growth pattern, but ductal adenocarcinomas may demonstrate intratumoral cystic appearance or accompany peritumoral non-neoplastic cystic lesions, thus mimicking cystic pancreatic tumors on imaging studies. The histopathologic findings for PDA with cystic feature are divided into neoplastic and non-neoplastic cysts. Neoplastic cystic changes include large-duct type cysts (microcystic appearance), neoplastic mucin cysts (macrocystic appearance), colloid carcinomas (mucinous noncystic adenocarcinomas), and degenerative cystic change usually caused by hemorrhagic necrosis of tumor. Non-neoplastic cystic changes include retention cysts caused by ductal obstruction and pseudocysts caused by tumor-associated pancreatitis. Depending on the presence, size, number, and configuration of cystic changes, PDA should be differentiated from various types of cystic neoplasms. This pictorial essay provides histopathologic classification of PDAs with cystic features along with the corresponding cross-sectional imaging findings, and their differential diagnosis