A New Layer Casting System for Ceramic Laser Rapid Prototyping Apparatus

In the existing Ceramic Laser Fusion system, slurry is fed on the high temperature surface of the green part; therefore, a part of water infiltrates into the green block and vaporizes before the process of layer casting. As a result, the slurry viscosity rises gradually; the quality of the layer surface is not uniform, and the green part density is uneven. The aim of present study is to develop a new layer casting system which can solve the problems mentioned above to obtain a green part with uniform surface quality and density, and to shorten the time-taken of part fabrication. The first part of the paper illustrates the major requirements and parameters of a slurry distributor; the second part describes the integration of the slurry feeding device and layer casting system. The integrated system can feed slurry and cast thin layer simultaneously; consequently, the drawbacks of the existing system can be eliminated and the time-taken of the layer casting can be shortened. A variable-frequency drive (inverter) is used to control the motor speed. The relation between the frequency and the slurry delivery can be included in the process control program to adjust the quantity in accordance with the layer thickness; hence, the waste of the slurry can be reduced.Mechanical Engineerin

Classical Extended Conformal Algebras Associated with Constrained KP Hierarchy

We examine the conformal property of the second Hamiltonian structure of constrained KP hierarchy derived by Oevel and Strampp. We find that it naturallygives a family of nonlocal extended conformal algebras. We give two examples of such algebras and find that they are similar to Bilal's V algebra. By taking a gauge transformation one can map the constrained KP hierarchy to Kuperschmidt's nonstandard Lax hierarchy. We consider the second Hamiltonian structure in this representation. We show that after mapping the Lax operator to a pure differential operator the second structure becomes the sum of the second and the third Gelfand-Dickey brackets defined by this differential operator. We show that this Hamiltonian structure defines the W-U(1)-Kac-Moody algebra by working out its conformally covariant form.Comment: NHCU-HEP-94-28, 19 pages (Plain TeX

The Characteristics and Applications of Ceramic Laser Fusion and Ceramic Laser Sintering

The aim of present study is to investigate the possible application of the ceramic parts which are fabricated with the process of Ceramic Laser Fusion or Ceramic Laser Sintering. The experimental results reveal: (1) CLF can lead to a reduction in the porosity of the ceramic part but also can induce micro-cracks. Therefore, this process cannot produce a part with the required strength by a post-process of infiltration; (2) CLS is capable of fabricating a ceramic part with high porosity. By adjusting the slurry formulation and varying the scanning energy, the open porosity can be over 90vol% of the total porosity. After a post-process of infiltration, the density can be increased to 95%; therefore, CLS can apply to produce a part with high strength. Because the high open porosity leads to a good permeability, the process of CLS is suitable for the fabrication of ceramic shell mold.Mechanical Engineerin

Prospect of Making Ceramic Shell Mold by Ceramic Laser Fusion

Manufacturing prototypical castings by conventional investment casting not only takes several weeks, but also is prohibitively expensive. Z Corporation in USA, EOS GmbH and IPT in Germany employ the techniques of 3DP and SLS respectively to make directly ceramic shell molds for metal castings. Although those techniques dramatically reduce time expenditure and production cost, each layer cannot be thinner than 50 µm because of using powder to pave layers. The dimensional accuracy and roughness of the castings still cannot meet the specification of precision casting. Therefore, in this paper the ceramic laser fusion (CLF) was used to pave layers. Each layer can be thinner than 25 µm, so that the step effect can be diminished and the workpiece surface can be smoother; drying time will be shortened dramatically. Moreover, the inherent solid-state support formed by green portion has the capability of preventing upward and downward deformation of the scanned cross sections. In order to make shell mold which meets the roughness requirement (Rq=3.048µm) of the precision casting, following issues have to be further studied: (1) design a proper ceramic shell mold structure, (2) design a paving chamber for paving a complete green layer which can be easily collapsed, (3) cut down drying time, (4) optimize laser scanning process parameters with the smallest distortion, (5) eliminate sunken area, (6) reduce layer thickness to less than13µm, (7) control power to guarantee the energy uniformly absorbed by workpiece, and (8) develop a method which can directly clean green portion in cavity from gate.Mechanical Engineerin

Long-term X-ray Variability of Ultraluminous X-ray Sources

Long-term X-ray modulations on timescales from tens to hundreds of days have been widely studied for X-ray binaries located in the Milky Way and the Magellanic Clouds. For other nearby galaxies, only the most luminous X-ray sources can be monitored with dedicated observations. We here present the first systematic study of long-term X-ray variability of four ultraluminous X-ray sources (ESO 243-49 HLX-1, Holmberg IX X-1, M81 X-6, and NGC 5408 X-1) monitored with Swift. By using various dynamic techniques to analyse their light curves, we find several interesting low-frequency quasi-periodicities. Although the periodic signals may not represent any stable orbital modulations, these detections reveal that such long-term regular patterns may be related to superorbital periods and structure of the accretion discs. In particular, we show that the outburst recurrence time of ESO 243-49 HLX-1 varies over time and suggest that it may not be the orbital period. Instead, it may be due to some kinds of precession, and the true binary period is expected to be much shorter.Comment: 15 pages, 8 figures; accepted for publication in MNRA

A short note on the presence of spurious states in finite basis approximations

The genesis of spurious solutions in finite basis approximations to operators which possess a continuum and a point spectrum is discussed and a simple solution for identifying these solutions is suggested

Discovery of X-ray pulsations from "next Geminga" - PSR J1836+5925

We report the X-ray pulsation of ~173.3 ms for the "next Geminga", PSR J1836+5925, with recent XMM-Newton investigations. The X-ray periodicity is consistent wtih the gamma-ray ephemeris at the same epoch. The X-ray folded light curve has a sinusoidal structure which is different from the double-peaked gamma-ray pulse profile. We have also analysed the X-ray phase-averaged spectra which shows the X-ray emission from PSR J1836+5925 is thermal dominant. This suggests the X-ray pulsation mainly originates from the modulated hot spot on the stellar surface.Comment: 7 pages, 3 figures, 1 table, accepted for publication in ApJ Lette

Morphological study of myelinated and unmyelinated fibres in the sacrococcygeal dorsal roots of the rat

Background: The number and calibre of myelinated and unmyelinated fibres of the sacrococcygeal dorsal roots innervating the tail of rats were studied by means of light and electron microscopy. Materials and methods: There were an estimated total of 12,500 myelinated and 25,500 unmyelinated dorsal root fibres innervating the tail of a rat.  Results: The results showed that from the second sacral (S2) to the fourth sacral (S4) segment, the fibre diameter spectrum of myelinated fibres within each dorsal root was bimodal with two peaks at 5 microns and 10 microns, respectively. The first sacral (S1) segment was composed of numerous smaller-size myelinated fibres, thus forming a right-skewed distribution. The coccygeal (Co) segments showed a unimodal distribution peaking at 10 microns for the first (Co1) segment and gradually shifting to 7 microns for the third (Co3) segment. Overall, there was a continuous relative increase of the larger vs. the smaller myelinated fibres from the sacral to coccygeal segments. The fibre diameter of unmyelinated fibres of all these roots was unimodal with a single peak at 0.5 microns. The ratio of unmy- elinated to myelinated fibre numbers was on average 2.83 for the S1–S2 roots, 1.66 for the S3–S4 roots, and 1.24 for the coccygeal roots.  Conclusions: The comparison of the left- and right-side nerve fibres show that there was no significant difference, thus implying a symmetrical sensory innervation of the rat’s tail.