A Monte Carlo study of temperature-programmed desorption spectra with attractive lateral interactions

We present results of a Monte Carlo study of temperature-programmed desorption in a model system with attractive lateral interactions. It is shown that even for weak interactions there are large shifts of the peak maximum temperatures with initial coverage. The system has a transition temperature below which the desorption has a negative order. An analytical expression for this temperature is derived. The relation between the model and real systems is discussed.Comment: Accepted for publication in Phys.Rev.B15, 10 pages (REVTeX), 2 figures (PostScript); discussion about Xe/Pt(111) adde

Approximate particle number projection for finite range density dependent forces

The Lipkin-Nogami method is generalized to deal with finite range density dependent forces. New expressions are derived and realistic calculations with the Gogny force are performed for the nuclei $^{164}$Er and $^{168}$Er. The sharp phase transition predicted by the mean field approximation is washed out by the Lipkin-Nogami approach; a much better agreement with the experimental data is reached with the new approach than with the Hartree-Fock_Bogoliubov one, specially at high spins.Comment: 5 pages, RevTeX 3.0, 3 postscript figures included using uufiles. Submitted to Phys. Rev. Let

Shaping a Corporate Identity From Below; the Role of the BAT Bulletin.

Existing studies that have explored the use of company journals as a mode of corporate communication during the early 20th century have invariably adopted an instrumentalist view of these publications. Company journals have been seen as a means of projecting to employees a top-down view of organisations. This article identifies a counter-example in which the origins of a company journal, the 'Bat Bulletin', are seen to arise as the result of an initiative stemming from the employees themselves. These antecedents gave the 'Bat Bulletin' a high degree of legitimacy amongst staff and provided the company with an important means of establishing a unified corporate culture across a disparate group international operating companies. Over time, however, the contents of the journal gradually became more conventional, and it was eventually closed down when the strategy of international integration ceased to be a desirable corporate objective during the 1930's

8‐Year‐Old Boy with Progressive Headache

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/99694/1/bpa12074.pd

Multibeam Maser Survey of methanol and excited OH in the Magellanic clouds: new detections and maser abundance estimates

‘The definitive version is available at www.blackwell-synergy.com.’ Copyright Blackwell Publishing DOI: 10.1111/j.1365-2966.2008.12888.xPeer reviewe

Sustainable Materials and Biorefinery Chemicals from Agriwastes

This is an open access chapter distributed under the terms of the Creative Commons Attribution License.-- et al.Countries with economies based on agriculture generate vast amounts of low or null value wastes which may even represent an environmental hazard. In our group, agricultural industrial wastes have been converted into value added liquid substances and materials with several aims: decreasing pollution, giving added value to wastes and working in a sustainable manner in which the wastes of an industry can be used as the raw materials of the same or others, as the “cradle to cradle” philosophy states [1]. Sub-products from the agricultural food industry are being employed as renewable low cost raw materials in the preparation of Ecomaterials, designed for use in a number of industrial processes of great interest. Given their origin, these materials may compete with conventional ones since with this process a sustainable cycle is closed, in which the residues of one industry are used as raw materials in the same or other industries [2]. With regards to the composition of the residues produced from agriculture, the pH of soil is of great importance, since plants can only absorb the minerals that are dissolved in water and pH is mandatory for the physical, chemical and biological properties of soil and the main cause of many agronomic questions related to nutrient assimilation [3-5]. Variations of pH modify the solubility of most elements necessary for the development of crops and also influence the microbian activity of soil, which will affect the transformation of elements that are liberated to the soil and can be assimilated to form crops or not [3]. For example at pH lower than 6 or higher than 8 bacterian activities are lowered, the oxidation of nitrogen to nitrate is reduced and the amount of nitrogen available for plant food is decreased. However Al, Fe and manganese are more soluble at low pHs, reaching even toxic concentrations. Potassium and sulphur are easily adsorbed at pH higher than 6, calcium and magnesium between 7 and 8.5 and iron at pH lower than 6. For alkaline pH in soil, the availability of H2PO4-can be reduced through precipitation of phosphorous containing salts withcations such as calcium Ca2+ or magnesium Mg2+. However when soils have acid pH other compounds with HPO42-and iron (Fe2+), aluminium (Al3+) and manganese (Mn2+) can form, with increased solubility. The main factors that influence soil pH are the mineral composition and how it meteorizes, the decomposition of organic matter, how nutrients are partitioned among the solution and aggregates and of course the pluviometryof the zone and atmospheric contamination.Lower pHs are found in places with high pluviometry, with high organic matter decomposition, young soils developed on acid substrates, and places with high atmospheric contamination (acid rain). Depending on the species, crops can benefit from calcareous soils with high calcium carbonate content such as alfalfa, but other plants prefer soils with acid pH such as potatoes, coffee or tobacco. It is clear that different seasons will produce plants with a varying composition depending on the atmospheric conditions and therefore the materials derived from them need to be characterised and analysed to determine their possible uses.Given its multidisciplinary approach, this work is being carried out through the collaboration among national (Institute of Materials Science of Madrid (ICMM, CSIC), Institute of Catalysis (ICP, CSIC), Centre of Molecular Biology Severo Ochoa (UAM-CSIC), Polytechnic University of Madrid (UPM), University at distance (UNED), University Complutense of Madrid (UPM) and international (University of Sheffield and University of Ghent) research groups, in addition to various industries interested in the transformation of their residues and or sub-products into “value added materials”, with whom various research projects have been and are being sponsored by the MICINN and CDTI.Peer Reviewe

Choice of tracers for the evaluation of spray deposits

Tracer substances, used to evaluate spraying effectiveness, ordinarily modify the surface tension of aqueous solutions. This study aimed to establish a method of using tracers to evaluate distribution and amount of spray deposits, adjusted to the surface tension of the spraying solution. The following products were tested: 0.15% Brilliant Blue, 0.15% Saturn Yellow in 0.015% Vixilperse lignosulfonate, and 0.005% sodium fluorescein, and mixtures of Brilliant Blue plus Saturn Yellow and Brilliant Blue plus sodium fluorescein at the same concentrations. Solutions were deposited on citrus leaves and stability was determined by measuring fluorescence and optical density of solutions without drying, dried in the dark and exposed to sunlight for 2, 4 and 8 h. These values were compared to those obtained directly in water. The static surface tension of the tracer solution was determined by weighing droplets formed during a period of 20 to 40 seconds. The Brilliant Blue and Saturn Yellow mixture at 0.15% was stable under all conditions tested. It was not absorbed by the leaves and maintained the same surface tension as that of water, thus permitting concentration adjustment to the same levels used for agrochemical products, and allowing the development of a qualitative method based on visual evaluation of the distribution of the pigment under ultraviolet light and of a quantitative method based on the determination of the amount of the dye deposited in the same solution. Spray deposition could be evaluated at different surface tensions of the spraying solution, simulating the effect of agrochemical formulations

Active Brownian Particles. From Individual to Collective Stochastic Dynamics

We review theoretical models of individual motility as well as collective dynamics and pattern formation of active particles. We focus on simple models of active dynamics with a particular emphasis on nonlinear and stochastic dynamics of such self-propelled entities in the framework of statistical mechanics. Examples of such active units in complex physico-chemical and biological systems are chemically powered nano-rods, localized patterns in reaction-diffusion system, motile cells or macroscopic animals. Based on the description of individual motion of point-like active particles by stochastic differential equations, we discuss different velocity-dependent friction functions, the impact of various types of fluctuations and calculate characteristic observables such as stationary velocity distributions or diffusion coefficients. Finally, we consider not only the free and confined individual active dynamics but also different types of interaction between active particles. The resulting collective dynamical behavior of large assemblies and aggregates of active units is discussed and an overview over some recent results on spatiotemporal pattern formation in such systems is given.Comment: 161 pages, Review, Eur Phys J Special-Topics, accepte