Induction of osteogenic differentiation of bone marrow stromal cells on 3D polyester-based scaffolds solely by subphysiological fluidic stimulation in a laminar flow bioreactor

The fatal determination of bone marrow mesenchymal stem/stromal cells (BMSC) is closely associated with mechano-environmental factors in addition to biochemical clues. The aim of this study was to induce osteogenesis in the absence of chemical stimuli using a custom-designed laminar flow bioreactor. BMSC were seeded onto synthetic microporous scaffolds and subjected to the subphysiological level of fluid flow for up to 21 days. During the perfusion, cell proliferation was significantly inhibited. There were also morphological changes, with F-actin polymerisation and upregulation of ROCK1. Notably, in BMSC subjected to flow, mRNA expression of osteogenic markers was significantly upregulated and RUNX2 was localised in the nuclei. Further, under perfusion, there was greater deposition of collagen type 1 and calcium onto the scaffolds. The results confirm that an appropriate level of fluid stimuli preconditions BMSC towards the osteoblastic lineage on 3D scaffolds in the absence of chemical stimulation, which highlights the utility of flow bioreactors in bone tissue engineering.publishedVersio

Improving ROCs of Constant False Alarm Coded Anti-collision Radar in very noised cases

The use of Constant False Alarm Coded Anticollision Radar (CFACAR) is very interesting in automotive environment. Due to the orthogonality properties of used codes this system is most robust to multi-user interferences. The actual version of the receiver called in this paper Single Correlation Receiver (SCR), is not able to detect the targets in very low input Signal to Noise Ratio (SNR). To resolve this problem, we present a new receiver called Averaging Correlation Receiver (ACR), that computes the average of the M later correlations.Then, we developed the expression of detection and false alarm probabilities for the new receiver in mono and multi-user scenarios. These probabilities are used to plot the new Receiver Operating Characteristics (ROCs). They are drawn for different values of input SNR and length M of ACR. There is a suitable value of M, according to some equation, that can be taken to have a good detection (ROCs more perfect). Also, we found that for a fixed SNR, we must increase sufficiently the length M but it is possible only for low relative velocity of the target. For a velocity of 5Km=h with M = 1055, we can lessen the value of the SNR until we reach SNR = -45 dB

Optimisation and validation of a custom-designed perfusion bioreactor for bone tissue engineering: Flow assessment and optimal culture environmental conditions

Various perfusion bioreactor systems have been designed to improve cell culture with three-dimensional porous scaffolds, and there is some evidence that fluid force improves the osteogenic commitment of the progenitors. However, because of the unique design concept and operational configuration, the experimental setups of perfusion bioreactor systems are not always compatible. To reconcile results from different systems, the thorough optimisation and validation of the experimental configuration are required in each system. In this study, optimal experimental conditions for a perfusion bioreactor were explored in 3 steps. First, an in silico modelling was performed using a scaffold geometry obtained by microCT and an expedient geometry parameterised with porosity and permeability to assess the accuracy of calculated fluid shear stress and computational time. Then, environmental factors for cell culture were optimised, including the volume of the medium, bubble suppression, and medium evaporation. Further, by combining the findings, it was possible to determine the optimal flow rate at which cell growth was supported but osteogenic differentiation was triggered. Here, we demonstrated that fluid shear stress, ranging from nearly 0 to 15 mPa, was sufficient to induce osteogenesis, but cell growth was severely impacted by the volume of perfused medium, the presence of air bubbles, and medium evaporation, all of which are common concerns in perfusion bioreactor systems. This study emphasises the necessity of optimisation of experimental variables, which may often be underreported or overlooked, and indicates steps which can be taken to address issues common to perfusion bioreactors for bone tissue engineering.publishedVersio

Engineering 3D degradable, pliable scaffolds toward adipose tissue regeneration; optimized printability, simulations and surface modification

We present a solution to regenerate adipose tissue using degradable, soft, pliable 3D-printed scaffolds made of a medical-grade copolymer coated with polydopamine. The problem today is that while printing, the medical grade copolyesters degrade and the scaffolds become very stiff and brittle, being not optimal for adipose tissue defects. Herein, we have used high molar mass poly(L-lactide-co-trimethylene carbonate) (PLATMC) to engineer scaffolds using a direct extrusion-based 3D printer, the 3D Bioplotter®. Our approach was first focused on how the printing influences the polymer and scaffold’s mechanical properties, then on exploring different printing designs and, in the end, on assessing surface functionalization. Finite element analysis revealed that scaffold’s mechanical properties vary according to the gradual degradation of the polymer as a consequence of the molar mass decrease during printing. Considering this, we defined optimal printing parameters to minimize material’s degradation and printed scaffolds with different designs. We subsequently functionalized one scaffold design with polydopamine coating and conducted in vitro cell studies. Results showed that polydopamine augmented stem cell proliferation and adipogenic differentiation owing to increased surface hydrophilicity. Thus, the present research show that the medical grade PLATMC based scaffolds are a potential candidate towards the development of implantable, resorbable, medical devices for adipose tissue regeneration.publishedVersio

Hybrid material based on hyaluronan hydrogels and poly(l-lactide-co-1,3-trimethylene carbonate) scaffolds toward a cell-instructive microenvironment with long-term in vivo degradability

Degradable polyester-based scaffolds are ideal for tissue engineering applications where long-term structural integrity and mechanical support are a requisite. However, their hydrophobic and unfunctionalized surfaces restrain their tissue-mimetic quality. Instead, hyaluronan (HA) hydrogels are able to act as cell-instructive materials with the ability to recapitulate native tissue, although HA is rapidly metabolized in vivo. Taking advantage of these distinctly diverse material properties, a degradable and concurrent hybrid hydrogel material was developed that combines the short-term tissue-relevant properties of bio-orthogonal crosslinked HA with the long-term structural and mechanical support of poly(l-lactide-co-trimethylene carbonate) (PLATMC) scaffolds. This method rendered the formulation of transparent, minimally swelling hydrogel compartments with a desirable cell-instructive “local” elastic modulus within the scaffold matrix without impeding key material properties of PLATMC. Long-term degradability over 180 days in vivo was realized by the integral PLATMC scaffold architecture obtained through either extrusion-based 3D printing or salt-particulate leaching. Intrinsic diffusion capacity within the hydrogel elicited unaffected degradation kinetics of PLATMC in vivo, despite its autocatalytic bulk degradation characteristics displayed when 3D-printed. The effect of the processing method on the material properties of PLATMC markedly extends to its in vivo degradation characteristics, and essential uniform degradation behavior can be advanced using salt-particulate leaching. Regardless of the scaffold fabrication method, the polymer exhibited a soft and flexible nature throughout the degradation period, governed by the rubbery state of the polymer. Our results demonstrate that the physicochemical properties of the hybrid hydrogel scaffold endow it with the potential to act as a cell instructive microenvironment while not affecting key material properties of PLATMC postprocessing. Importantly, the HA hydrogel does not adversely impact the degradation behavior of PLATMC, a vital aspect in the fabrication of tissue engineering constructs. The results presented herein open new avenues for the adoption of concurrent and well-defined tissue-relevant materials exhibiting the potential to recreate microenvironments for cell encapsulation and drug delivery in vivo while providing essential structural integrity and long-term degradability.publishedVersio

Delivery of VEGFA in bone marrow stromal cells seeded in copolymer scaffold enhances angiogenesis, but is inadequate for osteogenesis as compared with the dual delivery of VEGFA and BMP2 in a subcutaneous mouse model

Background: In bone tissue engineering (BTE), extensive research into vascular endothelial growth factor A (VEGFA)-mediated angiogenesis has yielded inconsistent results. The aim of this study was to investigate the influence on angio- and osteogenesis of adenoviral-mediated delivery of VEGFA alone or in combination with bone morphogenetic protein 2 (BMP2) in bone marrow stromal cells (BMSC) seeded onto a recently developed poly(LLA-co-CL) scaffold. Methods: Human BMSC were engineered to express VEGFA alone or in combination with BMP2 and seeded onto poly(LLA-co-CL) scaffolds. Changes in angiogenic and osteogenic gene and protein levels were examined by quantitative reverse-transcription polymerase chain reaction (RT-PCR), PCR array, and alkaline phosphatase assay. An in vivo subcutaneous mouse model was used to investigate the effect on angio- and osteogenesis of VEGFA alone or in combination with BMP2, using microcomputed tomography (μCT), histology, immunohistochemistry, and immunofluorescence. Results: Combined delivery of a lower ratio (1:3) of VEGFA and BMP2 (ad-BMP2 + VEGFA) led to upregulation of osteogenic and angiogenic genes in vitro at 3 and 14 days, compared with mono-delivery of VEGFA (ad-VEGFA) and other controls. In vivo, in a subcutaneous mouse model, both ad-VEGFA and ad-BMP2 + VEGFA scaffold explants exhibited increased angiogenesis at 2 weeks. Enhanced angiogenesis was largely related to the recruitment and differentiation of mouse progenitor cells to the endothelial lineage and, to a lesser extent, to endothelial differentiation of the implanted BMSC. μCT and histological analyses revealed enhanced de novo bone formation only in the ad-BMP2 + VEGFA group, corresponding at the molecular level to the upregulation of genes related to osteogenesis, such as ALPL, RUNX2, and SPP1. Conclusions: Although BMSC expressing VEGFA alone or in combination with BMP2 significantly induced angiogenesis, VEGFA alone failed to demonstrate osteogenic activity both in vitro and in vivo. These results not only call into question the use of VEGFA alone in bone regeneration, but also highlight the importance in BTE of appropriately formulated combined delivery of VEGFA and BMP2.publishedVersio

Sex-different hepaticglycogen content and glucose output in rats

<p>Abstract</p> <p>Background</p> <p>Genes involved in hepatic metabolism have a sex-different expression in rodents. To test whether male and female rat livers differ regarding lipid and carbohydrate metabolism, whole-genome transcript profiles were generated and these were complemented by measurements of hepatic lipid and glycogen content, fatty acid (FA) oxidation rates and hepatic glucose output (HGO). The latter was determined in perfusates from <it>in situ </it>perfusion of male and female rat livers. These perfusates were also analysed using nuclear magnetic resonance (NMR) spectroscopy to identify putative sex-differences in other liver-derived metabolites. Effects of insulin were monitored by analysis of Akt-phosphorylation, gene expression and HGO after s.c. insulin injections.</p> <p>Results</p> <p>Out of approximately 3 500 gene products being detected in liver, 11% were significantly higher in females, and 11% were higher in males. Many transcripts for the production of triglycerides (TG), cholesterol and VLDL particles were female-predominant, whereas genes for FA oxidation, gluconeogenesis and glycogen synthesis were male-predominant. Sex-differences in mRNA levels related to metabolism were more pronounced during mild starvation (12 h fasting), as compared to the postabsorptive state (4 h fasting). No sex-differences were observed regarding hepatic TG content, FA oxidation rates or blood levels of ketone bodies or glucose. However, males had higher hepatic glycogen content and higher HGO, as well as higher ratios of insulin to glucagon levels. Based on NMR spectroscopy, liver-derived lactate was also higher in males. HGO was inhibited by insulin in parallel with increased phosphorylation of Akt, without any sex-differences in insulin sensitivity. However, the degree of Thr172-phosphorylated AMP kinase (AMPK) was higher in females, indicating a higher degree of AMPK-dependent actions.</p> <p>Conclusions</p> <p>Taken together, males had higher ratios of insulin to glucagon levels, higher levels of glycogen, lower degree of AMPK phosphorylation, higher expression of gluconeogenic genes and higher hepatic glucose output. Possibly these sex-differences reflect a higher ability for the healthy male rat liver to respond to increased energy demands.</p

Role of Beta Trace Protein and Cystatin C as a Potential Biomarker for Early Detection of Type 2 Diabetic Nephropathy

Background: One of the most well-known diabetic microvascular consequences is diabetic nephropathy, which affects 40 percent of people with diabetes mellitus type 2. It develops into end stage renal disease, and diabetes biomarkers can be used as a predictor. Objectives: This study aimed to determine the concentration levels of serum Beta Trace Protein and serum Cystatin C in all stages of diabetic nephropathy disease. Subjects And Methods: A Case- control study included 120 Persons (30-persons appeared healthy as control and 90 patients proved with T2DM of both gender (64 males and 56 females), split into four groups by using urinary micro-albumin and albumin to creatinine ratio (UACR) as following: group-I: includes 30persons as a healthy control (UACR < 30 mg/g creatinine). Group-II: includes 30patients with type2 DM normoalbuminuria (UACR < 30 mg/g creatinine) as a positive control. Group-III: includes 30 patients with type 2 DM microalbuminuria (UACR 30 – 300 mg/g creatinine). Group-IV: includes 30 patientsا with type 2 DM macroalbuminuria (UACR˃ 300 mg/g creatinine), all groups with ages ranges between (40-69) years. in allا groups, Beta Trace Protein and Cystatin C quantitative enzyme immunoassay (double-antibody sandwich), calculated in serum and both biomarkers using the same methods. Results: Patients with diabetes have statistically substantially increased blood levels of Beta trace protein and Cystatin C. with macro-albuminuria groups in comparison to micro-albuminuria, normo-albuminuria and healthy control in addition, the mean for the micro-albuminuria group was greater than for the healthy control and normo-albuminuria groups. Conclusion: A rise in blood Beta trace protein and Cystatin C levels in the early nephropathy group microalbuminuria, which may be used as a predictor for early diagnosis of diabetic nephropathy

Housefly (Musca domestica) and blow fly (Protophormia terraenovae) as vectors of bacteria carrying colistin resistance genes

Flies have the capacity to transfer pathogens between different environments, acting as one of the most important vectors of human diseases worldwide. In this study, we trapped flies on a university campus and tested them for mobile resistance genes against colistin, a last-resort antibiotic in human medicine for treating clinical infections caused by multidrug-resistant Gram-negative bacteria. Quantitative PCR assays we developed showed that 34.1% of Musca domestica (86/252) and 51.1% of Protophormia terraenovae (23/45) isolates were positive for the mcr-1 gene, 1.2% of M. domestica (3/252) and 2.2% of P. terraenovae (2.2%, 1/45) isolates were positive for mcr-2, and 5.2% of M. domestica (13/252) and 44.4% of P. terraenovae (20/45) isolates were positive for mcr-3. Overall, 4.8% (9/189) of bacteria isolated from the flies were positive for the mcr-1 gene (Escherichia coli: 8.3%, 4/48; Enterobacter cloacae: 12.5%, 1/8; Providencia alcalifaciens: 11.8%, 2/17; Providencia stuartii: 4.9%, 2/41), while none were positive for mcr-2 and mcr-3. Four mcr-1positive isolates (two P. stuartii and two P. alcalifaciens) from blow flies trapped near a dumpster had a MIC for colistin above 4 mg/ml. This study reports mcr-1 carriage in Providencia spp. and detection of mcr-2 and mcr-3 after their initial identification in Belgium and China, respectively. This study suggests that flies might contribute significantly to the dissemination of bacteria, carrying these genes into a large variety of ecological niches. Further studies are warranted to explore the roles that flies might play in the spread of colistin resistance genes. IMPORTANCE Antimicrobial resistance is recognized as one of the most serious global threats to human health. An option for treatment of the Gram-negative ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) bacteria with multiple drug resistance was the reintroduction of the older antibiotic colistin. However, a mobile colistin resistance gene (mcr-1) has recently been found to occur widely; very recently, two other colistin resistance genes (mcr-2 and mcr-3) have been identified in Belgium and China, respectively. In this study, we report the presence of colistin resistance genes in flies. This study also reports the carriage of colistin resistance genes in the genus Providencia and detection of mcr-2 and mcr-3 after their initial identification. This study will stimulate more in-depth studies to fully elucidate the transmission mechanisms of the colistin resistance genes and their interaction