EBW technology applied on the ICRF antenna component

Central conductor is one of the key components of ion cyclotron ranges of heating antenna, which is usually formed by welding due to the complex structures. High level of welding seam quality and small deformation are very important to central conductor. Electron beam welding (EBW) is suggested as the central conductor welding. To meet EBW requirements and reduce the risk, complex and high level of the accuracy welding fixture have been designed for central conductor EBW. Some samples were manufactured to do test and examination for EBW qualification before central conductor welding. Based on the welding parameters, thermal analysis using finite element method for the welding seam have been carried out. One mockup of central conductor for EBW has been made for proving welding parameters. In addition, some postwelding process were employed after one central conductor EBW. Results of examination and inspection of one central conductor using EBW are presented in this paper

A novel radial basis function neural network for fault section estimation in transmission network

In this paper, the application of Radial Basis Function Neural Network (RBF NN) to fault section estimation in power systems is addressed. The orthogonal least square algorithm has been extended to optimize the parameters of RBF NN. In order to assess the effectiveness of RBF NN, a classical Back-Propagation Neural Network (BP NN) has been developed to solve the same problem for comparison. Computer test is conducted on a 4-bus test system and the test results show that the RBF NN is quite effective and superior to BP NN in fault section estimation.published_or_final_versio

Seismic Performance of Multistorey Masonry Structure with Openings Repaired with CFRP Grid

FRP composites have been used for strengthening RC and masonry structures for decades. However, the researches on repairing multistorey masonry structures using FRP grids were relative less. In the present paper, an experimental study on the seismic performance of multistorey masonry structure with openings repaired with CFRP grid is introduced. Specifically, a 1/3-scale three-floor masonry wall with window openings was tested under quasistatic action to simulate the seismic damages. The damaged masonry wall was then repaired by externally bonding CFRP grids to the areas where the cracks intensively occurred. The repaired masonry wall was retested under the same loading to investigate the seismic resistance and assess the recovery attributed from the CFRP grid repairing. The findings of this study showed that CFRP grid repairing could effectively postpone or even prevent the occurrence and development of cracking. The seismic resistance of the masonry, including shear capacity, energy dissipation capacity, deformability, stiffness degradation, and ductility, was restored. The application of CFRP grid may shift the failure mechanism of the multistorey masonry wall. The recommendation of repair scheme for the similar structures was also proposed in accordance with the findings of the present work

Triple-Mode Cavity Bandpass Filter on Doublet with Controllable Transmission Zeros

© 2013 IEEE. On the basis of doublet and its properties, a class of multiple-mode narrow band bandpasss filter is designed and fabricated by simultaneously exploiting the three resonant modes in a single rectangular cavity: TE101, TE011, and TM110 modes. The input/output ports of the proposed filter are fed by coupling a microstrip line to a slot on the side wall of a rectangular cavity. Different modes are excited by changing the position and shape of the two slots at input and output of the rectangular cavity without any intra-cavity coupling. Besides three poles within the passband, a pair of transmission zeros (TZs) is achieved, which can be controlled independently by setting the positions of the two TZs at the lower and/or upper stopband. High stopband attenuation and high filtering selectivity are achieved by considerably allocating three transmission poles and two zeros. In order to verify the proposed theory, two filter prototypes are fabricated and measured

Individually Frequency Tunable Dual- and Triple-band Filters in a Single Cavity

© 2013 IEEE. This paper presents a new class of second-order individually and continuously tunable dual- and triple-band bandpass filters in a single metal cavity. Each passband is realized by two identical metal posts. These dual- and triple-band tunable filters are achieved by putting two or three identical sets of metal-post pair in a single metal cavity. Metal screws are co-designed as a part of the metal posts to control their insertion depth inside the cavity. In this way, the resonant frequencies can be continuously controlled and designed at the desired frequency bands. Moreover, the distance between the two metal posts in a post pair can be freely tuned. Thus, the external quality factor (Qe) and coupling coefficient (k) between the adjacent modes can be easily adjusted to meet the specified requirement in synthesis design. At the bottom of the cavity, some grooves are used to extend the tunable frequency range and make the resonant frequency linearly varied with the height of the metal post. The center frequency of each passband can be independently tuned with a frequency range of 0.8-3.2 GHz and tunable ratio of 4. Finally, the continuously tunable dual- and triple-band bandpass filters prototypes with second order response are designed and fabricated, of which each passband can be individually tuned with a large tuning range

Establishing production service system and information collaboration platform for mold and die products

This paper investigates how the new concept of product service systems can be used and extended to transform, elevate, and revitalize traditional equipment manufacturing industry such as the Mold and Die (MD) sector. A mold and die production service systems (MPSS) framework is established based on recent developments within our industrial collaborators. Within the MPSS framework, MD manufacturers become more specialized in producing MD products and components while sharing and outsourcing manufacturing-oriented services (MOS) from a service provider. Typical services include collaborative order pooling and release, collaborative project progress status tracking, contractor-managed collaborative outsourcing, collaborative product design, collaborative production planning and scheduling, and after-sales technical supports. MOSs are designed, developed, and deployed as SaaS (software as application services) following the service-oriented architecture. Collectively, they form iMPSS-an Information and Collaboration Platform that enables MPSS. The use of iMPSS leads to benefits for stakeholders involved in providing mold and die functionality including better shopfloor decisions and reduced IT investments. © 2010 The Author(s).published_or_final_versionSpringer Open Choice, 21 Feb 201

Extraction of Total Alkaloids from Corydalis saxicola Bunting by the Macroporous Resin

The total alkaloids were extracted from Corydalis saxicola Bunting by macroporous resin.Six different macroporous resins were used for extraction of the total alkaloids and dehydrocavidine by using static and dynamic adsorption-desorption experiments.The specific adsorption capacity and eluting of D101 macroporous resin were comparatively high.The optimum parameters of the purification process were established as the sample concentration of 0.2 g/ml at the absorption ? ow rate of 2 BV/h and with 3 BV of 60% ethanol as the desorption solvent.The contents of total alkaloids in the purifi ed extract were over 60%. 利用大孔吸附樹脂分離巖黃連中的總生物堿,采用靜態和動態吸附-解吸附方法,以總生物堿和脫氫卡維丁含量為指標,考察了6種大孔吸附樹脂對巖黃連總生物堿的吸附能力,其中D101型大孔吸附樹脂的比吸附量和比洗脫量均較高。優化后的提取工藝為:上樣藥液原藥材濃度0.2g/ml,吸附流速為2BV/h,解吸附溶劑為60%乙醇(3BV),所得巖黃連提取物中總生物堿含量大于60%

Effect of bainite layer by LSMCIT on wear resistance of medium-carbon bainite steel at different temperatures

In this work, bainite layer was prepared by Laser surface melting combined with isothermal treatment (LSMCIT) at 250ºC. The microstructures of the samples were analyzed by scanning electron microscopy (SEM), X-ray Diffraction (XRD) and transmission electron microscopy (TEM). Their wear resistances at 20ºC, 100ºC and 200ºC were measured using reciprocating tribometer. After the wear test, the confocal laser scanning microscope and SEM were used to characterize the topography of all abrasion surfaces, and the phase transformations occurred on the contact surfaces were analyzed by XRD. The results show that the microstructure of the LSMCIT sample has been refined to nanoscale. The wear volume reduction ratio of LSMCIT sample is 40.9% at 20ºC. The wear resistances of the samples are decreased with increasing of the temperature, however, the decrease in amplitude of the bainite is relatively small. The harder surface of the LSMCIT sample can provides higher mechanical support, and the white-etching layer on surface are difficult to remove by the reciprocating friction. The wear resistances of the LSMCIT samples at 20ºC, 100ºC and 200ºC are excellent, which shows the wide temperature ranges in wear applications