Characterization And Aqueous Colloidal Processing Of Tungsten Nano-powders

Extensive attention has been paid to consolidate nanoparticles into nanocrystalline components that possess better properties than their coarse-grained counterparts. Nanocrystalline monolithic tungsten (W) has been envisaged to possess better properties than coarse-grained tungsten and to improve the performance of many military components. Commercially available nano-W powders were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and Brunauer, Emmett, and Teller (BET) measurement. While the bulk of nano-W powders consisted of bcc-W as confirmed by XRD and TEM, much of their surface consisted of WO3 with traces of WO2 and WC. Despite the irregular morphology and agglomerates greater than 1 ï­m in size, the diameter of individual nano-W powders ranged from 30 to 100 nm with a surface area of 10.4 m2/g. To obtain green bodies of higher densities and more homogeneous microstructures after consolidation, W nanopowders were de-agglomerated in water and slip cast in plaster molds. De-agglomeration in water was conducted by repeated ultrasonication, washing, centrifuge and pH adjustment. The change in particle size and morphology was examined via SEM. After the initial surface oxide was removed by repeated washing, the reactivity of W nanoparticles to water was somewhat inhibited. Increasing the number of cycles for ultrasonication and washing increased the pH, the degree of de-agglomeration and the stability of W suspension. The zeta potential was more negative with increasing pH and most negative at pH values close to 5. Viscosity also decreased with increasing pH and reached a minimum at a pH 5. To obtain the highest solid loading with the lowest viscosity, the pH value of W suspension was adjusted to 5 using aqueous tetramethylammonium hydroxide solutions. The relative density of the slip cast increased with longer ultrasonic time, increasing slurry pH up to 5, and consequent increase in solids loading. Smaller particles were separated from larger ones by ultrasonication, washing with water and centrifugation. At a 27.8 vol.% solids loading, the size-separated fine W slurry was slip cast into pellets with relative green densities up to 41.3 % and approximate particle sizes of 100 nm. W powders were also ultrasonicated in aqueous poly (ethyleneimine) (PEI) solutions with various concentrations. SEM examinations of particle sizes showed that 1 wt.% PEI led to the optimum dispersion and ultrasonication for longer time with a low power resulted in better dispersion. 0.5 g of W powders were ultrasonicated in 10 ml aqueous poly (allylamine hydrochloride) (PAH) solutions with molar concentrations ranging from 0.01 to 0.05 M. W suspensions with 0.03 M and 0.04 M PAH after two washing cycles showed improved dispersion. Cold isostatic pressing can further increase the green density following slip casting. Sintered slip casts made from de-agglomerated nanoparticle W showed a lower density, more uniform microstructure, smaller grains and smaller pores than the sintered dry pressed pellets

A magnetorheological study of single-walled and multi-walled carbon nanotube dispersions in mineral oil and epoxy resin.

Single wall carbon nanotubes (SWNTs) and multi-walled carbon nanotubes (MWNTs) were dispersed in mineral oil and epoxy resin. The magnetorheological properties of these dispersions were studied using a parallel plate rheometer. Strain sweeps, frequency sweeps, magneto sweeps and steady shear tests were conducted in various magnetic fields. G', G", h* and ty increased with increasing magnetic field, which was partially attributed to the increasing degree of the alignment of nanotubes in a stronger magnetic field. The SWNT/mo dispersions exhibited more pronounced magnetic field dependence than SWNT/ep and MWNT/mo counterparts due to their much lower viscosity. The alignment of SWNTs in mineral oil increased with rising nanotube concentration up to 2.5vol% but were significantly restricted at 6.41vol% due to nanotube flocculation

Adaptive multimodal continuous ant colony optimization

Seeking multiple optima simultaneously, which multimodal optimization aims at, has attracted increasing attention but remains challenging. Taking advantage of ant colony optimization algorithms in preserving high diversity, this paper intends to extend ant colony optimization algorithms to deal with multimodal optimization. First, combined with current niching methods, an adaptive multimodal continuous ant colony optimization algorithm is introduced. In this algorithm, an adaptive parameter adjustment is developed, which takes the difference among niches into consideration. Second, to accelerate convergence, a differential evolution mutation operator is alternatively utilized to build base vectors for ants to construct new solutions. Then, to enhance the exploitation, a local search scheme based on Gaussian distribution is self-adaptively performed around the seeds of niches. Together, the proposed algorithm affords a good balance between exploration and exploitation. Extensive experiments on 20 widely used benchmark multimodal functions are conducted to investigate the influence of each algorithmic component and results are compared with several state-of-the-art multimodal algorithms and winners of competitions on multimodal optimization. These comparisons demonstrate the competitive efficiency and effectiveness of the proposed algorithm, especially in dealing with complex problems with high numbers of local optima

Target profiling analyses of bile acids in the evaluation of hepatoprotective effect of gentiopicroside on ANIT-induced cholestatic liver injury in mice

AbstractEthnopharmacological relevanceGentiopicroside (GPS), one of iridoid glucoside representatives, is the most potential active component in Gentiana rigescens Franch. ex Hemsl and Gentiana macrophylla Pall. These two herbs have been used to treat jaundice and other hepatic and billiary diseases in traditional Chinese medicine for thousands of years.Aim of the studyThis study aimed to investigate the protective effects and mechanisms of GPS on α-naphthylisothiocyanate (ANIT) induced cholestatic liver injury in mice.Materials and methodsMice were treated with GPS (130mg/kg, ig) for 5 consecutive days. On the third day, mice were given a single dose of Alpha-naphthylisothiocyanate (75mg/kg, ig). Serum biochemical markers and individual bile acids in serum, liver, urine and feces were measured at different time points after ANIT administration. The expression of hepatic bile acid synthesis, uptake and transporter genes as well as ileum bile acid transporter genes were assayed.ResultsIn this study, ANIT exposure resulted in serious cholestasis with liver injury, which was demonstrated by dramatically increased serum levels of ALT, ALP, TBA and TBIL along with TCA CA, MCAs and TMCAs accumulation in both liver and serum. Furthermore, ANIT significantly decreased bile acid synthesis related gene expressions, and increased expression of bile acid transporters in liver. Continuous treatment with GPS attenuated ANIT-induced acute cholestasis as well as liver injury and correct the dyshomeostasis of bile acids induced by ANIT. Our data showed that GPS significantly upregulated the hepatic mRNA levels of synthesis enzymes (Cyp8b1 and Cyp27a1) and transporters (Mrp4 Mdr1 and Ost-β) as well as ileal bile acid circulation mediators (Asbt and Fgf15), accompanied by serum and hepatic bile acid levels decrease and further urinary and fecal bile acid levels increase.ConclusionGPS can change bile acids metabolism which highlights its importance in mitigating cholestasis, resulting in the marked decrease of intracellular bile acid pool back toward basal levels. And the protective mechanism was associated with regulation of bile acids-related transporters, but the potential mechanism warrants further investigation

Consensus disturbance rejection for Lipschitz nonlinear multi-agent systems with input delay: a DOBC approach

In this paper, a new predictor-based consensus disturbance rejection method is proposed for high-order multi agent systems with Lipschitz nonlinearity and input delay. First, a distributed disturbance observer for consensus control is developed for each agent to estimate the disturbance under the delay constraint. Based on the conventional predictor feedback approach, a non-ideal predictor based control scheme is constructed for each agent by utilizing the estimate of the disturbance and the prediction of the relative state information. Then, rigorous analysis is carried out to ensure that the extra terms associated with disturbances and nonlinear functions are properly considered. Sufficient conditions for the consensus of the multi-agent systems with disturbance rejection are derived based on the analysis in the framework of Lyapunov-Krasovskii functionals. A simulation example is included to demonstrate the performance of the proposed control scheme. (C) 2016 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.National Natural Science Foundation of China [61673034]SCI(E)ARTICLE1,SI298-31535

A Survey of Research Progress and Development Tendency of Attribute-Based Encryption

With the development of cryptography, the attribute-based encryption (ABE) draws widespread attention of the researchers in recent years. The ABE scheme, which belongs to the public key encryption mechanism, takes attributes as public key and associates them with the ciphertext or the user’s secret key. It is an efficient way to solve open problems in access control scenarios, for example, how to provide data confidentiality and expressive access control at the same time. In this paper, we survey the basic ABE scheme and its two variants: the key-policy ABE (KP-ABE) scheme and the ciphertext-policy ABE (CP-ABE) scheme. We also pay attention to other researches relating to the ABE schemes, including multiauthority, user/attribute revocation, accountability, and proxy reencryption, with an extensive comparison of their functionality and performance. Finally, possible future works and some conclusions are pointed out

Shear-Wave Splitting Analysis Using Optimization Algorithms

AbstractShear-wave splitting (SWS) analysis is used to predict fractures in subsurface media. Specifically, two parameters relevant to SWS analysis (the azimuth of the fast shear wave and the time delay between the fast and slow shear waves) are used to quantify the main azimuth and degree of the fracture development, respectively. However, the algorithms of SWS analysis using a grid search have relatively low computational efficiency, as they need to calculate the objective function values of all grid points. To improve the efficiency of SWS analysis, we proposed new algorithms using the gradient descent, Newton, and advance-retreat methods. The new methods use the direction of the fastest gradient descent, the intersection points of the tangent plane of the first-order objective function with the zero plane, and narrowing the range of extremum points to determine the search path. Therefore, this removes the necessity to compare all grid points in the value region. We compared the three methods and the rotation-correlation method, and both synthetic and field data tests indicated that all three methods had higher computational efficiency than the traditional grid search method. Among the proposed methods, the gradient-descent method obtained the most accurate results for both synthetic and field data. Our study shows that SWS analysis combined with the gradient-descent method can accurately and efficiently obtain SWS parameters for fracture prediction

Output-based disturbance rejection control for non-linear uncertain systems with unknown frequency disturbances using an observer backstepping approach

This study is concerned with the output feedback control design for a class of non-linear uncertain systems subject to multiple sources of disturbances including model uncertainties, unknown constant disturbances, harmonic disturbances with unknown frequency and amplitude. The total disturbances and uncertainties are delicately represented by a compact exogenous model first. By incorporating the adaptive internal model principle, a set of dynamic estimators are developed for both state and disturbance observations. By means of observer backstepping technique, a composite output feedback controller is constructed based on the disturbance and state estimations. The stability of the closedloop system is rigorously established based on Lyapunov stability criterion. A missile roll stabilisation example is finally investigated to validate the effectiveness of the proposed control approach