Performance of treated and untreated asymmetric polysulfone hollow fiber membrane in series and cascade module configurations for CO2/CH4 gas separation system

This study investigates the effects of one-, two- and three-stage membrane system configurations in series arrangement for theCO2/CH4 separation for both untreated and treated membranes. Asymmetric polysulfone hollow fiber membranes were fabricated from 33 wt.% of polysulfone polymer using dry/wet phase inversion process. The produced membranes were characterized by pure gas permeation experiments, Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM), density measurement and Thermogravimetric Analysis (TGA). For both untreated and treated membranes, the pressure-normalized flux of CO2 decreased with increasing of the membrane stages. In addition, the selectivities of asymmetric hollow fiber membrane showed a more constant trend with feed pressure. Treated membrane exhibited lower pressure-normalized flux than untreated membranes due to skin layer densification which increased the transport resistance, thus lead to the reduction in pressure-normalized fluxes. Among all the three configurations studied, two-stage membrane configuration showed the most constant trend in term of selectivity. However, three-stage cascade configuration produced the highest CO2/CH4 selectivity especially when tested at low feed pressure range. Effect of stage cut on feed pressure showed an increasing trend with increasing of CO2 and CH4 feed pressure for all configurations. This is due to the increase of the permeation driving force, which caused the passage of larger amounts of more permeable gas through the membrane. This study showed that, three-stage cascade configuration exhibited the smallest stage cut values thus produced higher purity of CO2 in permeate stream

Classification of Malaysian vowels using formant based features

Automatic speech recognition (ASR) has made great strides with the development of digital signal processing hardware and software, especially using English as the language of choice. Despite of all these advances, machines cannot match the performance of their human counterparts in terms of accuracy and speed, especially in case of speaker independent speech recognition. In this paper, a new feature based on formant is presented and evaluated on Malaysian spoken vowels. These features were classified and used to identify vowels recorded from 80 Malaysian speakers. A back propagation neural network (BPNN) model was developed to classify the vowels. Six formant features were evaluated, which were the first three formant frequencies and the distances between each of them. Results, showed that overall vowel classification rate of these three formant combinations are comparatively the same but differs in terms of individual vowel classification

Priority-grouping method for parallel multi-scheduling in Grid

With the advent in multicore computers, the scheduling of Grid jobs can be made more effective if scaled to fully utilize the underlying hardware, and parallelized to benefit from the exploitation of multicores. The fact that sequential algorithms do not scale with multicore systems nor benefit from parallelism remains a major obstacle to scheduling in the Grid. As multicore systems become ever more pervasive in our computing lives, over reliance on such systems for passive parallelism does not offer the best option in harnessing the benefits of their multiprocessors for Grid scheduling. An explicit means of exploiting parallelism for Grid scheduling is required. The Group-based Parallel Multi-scheduler, introduced in this paper, is aimed at effectively exploiting the benefits of multicore systems for Grid scheduling by splitting jobs and machines into paired groups and independently scheduling jobs in parallel from those groups. We implemented two job grouping methods, Execution Time Balanced (ETB) and Execution Time Sorted then Balanced (ETSB), and two machine grouping methods, Evenly Distributed (EvenDist) and Similar Together (SimTog). For each method, we varied the number of groups between 2, 4 and 8. We then executed the MinMin Grid scheduling algorithm independently within the groups. We demonstrated that by sharing jobs and machines into groups before scheduling, the computation time for the scheduling process drastically improved by magnitudes of 85% over the ordinary MinMin algorithm when implemented on a HPC system. We also found that our balanced group based approach achieved better results than our previous Priority based grouping approach

QoS within Business Grid Quality of Service (BGQoS)

Differences in domain QoS requirements have been an obstacle to utilising Grid Computing for main stream applications. While the resource could potentially provide potentially vital services as well as providing significant computing and storage capabilities, the lack of high level QoS specification capabilities has proven to be a hindrance. Business Grid Quality of Service (BGQoS) is a QoS model for business-oriented applications on Grid computing systems. BGQoS defines QoS at a high level facilitating an easier request model for the Grid Resource Consumer (GRC) and eliminates confusion for the Grid Resource Provider in supplying the appropriate resources to meet the GRC requirements. It offers high level QoS specification within multi-domain environments in a flexible manner. Employing component separation and dynamic QoS calculation, it provides the necessary tools and execution environment for a scalable set of requirements tailoring to specific domain demands and requirements. Moreover, through reallocation, the model provides the insurance that all QoS requirements are met throughout the execution period, including migrating tasks to different resources if necessary. This process is not random and adheres to a set of conditions which ensures that task execution and resource allocation happen when and in accordance with execution requirements. This paper focuses on BGQoS’ flexibility and QoS capability. More specifically, the concentration is on core operations within BGQoS and the methods used in order to deliver a sustained level of QoS which meets the GRC’s requirements while being versatile and flexible such that it can be tailored to specific domains. This paper also presents an experimental evaluation of BGQoS. The evaluation investigates the behaviour and performance of the separate operations and components within BGQoS, and moreover, it presents an investigation and comparison between the different operations and their effect on the full model

Group-based parallel multi-scheduler for grid computing

With the advent in multicore computers, the scheduling of Grid jobs can be made more effective if scaled to fully utilize the underlying hardware, and parallelized to benefit from the exploitation of multicores. The fact that sequential algorithms do not scale with multicore systems nor benefit from parallelism remains a major obstacle to scheduling in the Grid. As multicore systems become ever more pervasive in our computing lives, over reliance on such systems for passive parallelism does not offer the best option in harnessing the benefits of their multiprocessors for Grid scheduling. An explicit means of exploiting parallelism for Grid scheduling is required. The Group-based Parallel Multi-scheduler, introduced in this paper, is aimed at effectively exploiting the benefits of multicore systems for Grid scheduling by splitting jobs and machines into paired groups and independently scheduling jobs in parallel from those groups. We implemented two job grouping methods, Execution Time Balanced (ETB) and Execution Time Sorted then Balanced (ETSB), and two machine grouping methods, Evenly Distributed (EvenDist) and Similar Together (SimTog). For each method, we varied the number of groups between 2, 4 and 8. We then executed the MinMin Grid scheduling algorithm independently within the groups. We demonstrated that by sharing jobs and machines into groups before scheduling, the computation time for the scheduling process drastically improved by magnitudes of 85% over the ordinary MinMin algorithm when implemented on a HPC system. We also found that our balanced group based approach achieved better results than our previous Priority based grouping approach

Dumbbells and ankle-wrist weight training leads to changes in body composition and anthropometric parameters with potential cardiovascular disease risk reduction

AbstractObjectivesPromoting physical activity is a global strategy to reduce the burden of cardiovascular disease. This study aimed to determine and compare the effect of light resistance training using either dumbbells or ankle-wrist weights on the anthropometric parameters and body composition of adults in Kelantan, Malaysia.MethodsThis randomized community trial was conducted in Kelantan, Malaysia, from March through August 2012. Adults with a body mass index (BMI) of more than 23 kg/m2 were randomized into dumbbell (N = 69) and ankle-wrist (N = 69) weight groups. Participants in the dumbbell group performed structured group exercises three times per week using a pair of one-kilogram dumbbells. Participants in the ankle-wrist weight group were given one pair of 500 gm ankle weights and one pair of 500 gm wrist weights to be worn during the activities of daily living three days per week for at least 20 min. BMI, waist circumference (WC), waist-to-hip ratio (WHR), body fat percentage (BF%) and skeletal muscle percentage (SM%) were measured at baseline, week 6, month 3 and month 6.ResultsEighty-nine participants completed this study. There were significant reductions in BMI only at week six for the dumbbell group. No significant BMI changes were observed for the ankle-wrist weight group. Significant improvements of WC, WHR, BF%, and SM% were observed in both intervention groups from baseline at week 6, month 3, and month 6.ConclusionResistance exercise using either dumbbells or ankle-wrist weights produced significant improvements in certain components of body composition and anthropometric parameters

Paddy supply chain: a case of paddy industry in Kelantan / Azmahani Yaacob @ Othman, Zulkorain Yusop and Syazwani A Malek @ Abdul

The production of paddy and the supply of rice to the consumers should not be viewed as separate segments but as a series of linked segments within a supply chain model. It involved of both upstream and downstream linkages. Each linkage has different processes and activities that produce different value and form of products and services before it reaches to the final customer or consumer. The paddy supply chain in Kelantan starts with the paddy producers (farmers), to the rice millers, then to the traders who will hand it to the wholesale traders, and lastly to the final consumers. A strong linkage between actors in every stage of supply chain can guarantee a competitive production and efficient distribution of paddy and rice from farmers to the final consumers

Preliminary toxicological evaluations of Polypeptide-K isolated from Momordica Charantia in laboratory rats.

This study examined the toxicological effects and safety of polypeptide k isolated from the seeds of Momordica charantia in laboratory rats. 30 male Sprague Dawley rats (12 weeks old, bodyweight 180-200 g) were randomly divided into 3 groups (1000 mg/kg, 500 mg and 0 mg/kg). Rats were acclimatized to laboratory conditions for 7 days and at day 8 rats were dosed orally with polypeptide k (in 2% DMSO/normal saline) and the controls received the dosed vehicle only. Rats were then observed for 72 hours before sacrificed. Rats were anaesthetized by pentobarbital (50 mg/kg ip) and 2-3.0 mL of blood was taken by cardiac puncture and rats were scarified by anaesthetic overdose. Immediately, organs (heart, lungs, liver, kidneys) were weigh and taken for histology. Organ sections were then evaluated by a histopathologist. Serum samples were assayed for liver functions (ALT and γ-GT) and kidney functions (BUN and creatinine). All rats showed normal behavior after the dosing and no statistical changes were observed in al blood parameters and organ weight. Histological examinations revealed normal organ structures. In conclusion, dosing of rats up to 1000 mg/kg did not have any effects on the rat behavior, liver or kidney functions nor histology of the selected organs

The competitiveness study on Kelantan paddy industry using porter's diamond model / Azmahani Yaacob@Othman , Prof Dr Zulkornain Yusop and Syazwani A Malek @ Abdul Malek

This study used the Porter’s Diamond Model as the theoretical underpinning to examine the competitiveness of Kelantan paddy industry. The model examined six (6) factors that were factor conditions, demand conditions, farmers’ strategies and supporting industries, chances and government’s roles. A total of 344 farmers were involved in this study. The farmers were required to answer a set of questionnaires which were adopted and customized from previous study. Partial least Square (PLS) SmartPLS M2 Version 3.0 was used for data analysis. The result showed that only four variables were significant and able to explain the competitiveness of paddy industry in Kelantan. They were factor conditions, demand conditions supporting industries and chances

User friendly system for the visually impaired in learning Al-Quran

This study presents a method to enable the visually impaired Muslim to learn and read the Al-Quran using Braille Display with software help. The system reads the database which contains all verses of Al-Quran and user will need to select the verse and ayah to read. Besides that, this system can be used in a class to teach visually impaired students to learn Al-Quran. Every word or character typed by the instructor in the main Braille Panel will be transmitted to the sub Braille Panel that is connected to the main Braille Panel. The selected verse of Al-Quran and ayah will also generate an index before being transmitted to the Braille Panel. The index will be transmitted to the Braille Display for people to touch and read the display. A user friendly Graphical User Interface (GUI) will be used to fulfill the ergonomics for the visually impaired user's physical capabilities. Several approaches are used to design and implement the interface for the visually impaired like speech or sound output and Braille display. The Braille codes can be displayed using the Braille panel. The design interface and structure of the system for the visually impaired users in learning Al-Quran is presented