Experimental study of subcooled flow boiling heat transfer on micro-pin-finned surfaces in short-term microgravity

The flow boiling heat transfer of subcooled air-dissolved FC-72 on micro-pin-finned surfaces was studied in microgravity by utilizing the drop tower facility in Beijing. The micro-pin-fins with the dimension of 30 x 30 x 60 mu m(3) (width x thickness x height), named PF30-60, were fabricated on a silicon chip by using the dry etching technique. For comparison, experiments of flow boiling heat transfer in terrestrial gravity were also conducted. The effects of inlet velocity on both flow boiling heat transfer and bubble behavior were explored. It was found that gravity has nearly no effect on flow boiling heat transfer for the departure of the inertial-force dominant bubbles in the low and moderate heat fluxes regions. In contrast, in the high-heat-flux region, the flow boiling heat transfer deteriorates and the critical heat flux (CHF) decreases due to the bubble accumulation in the channel. For PF30-60 at V = 0.5 m/s, the CHF point can be inferred to be between 20.8 and 24.5 W/cm(2), which is 63.0-74.2% of that in normal gravity. Regarding PF30-60 at V = 1.0 m/s, the CHF point can be inferred to be between 25.4 and 31.6 W/cm(2), which is 67.6-84.0% of that in normal gravity. The impact of gravity on CHF is closely linked to the channel geometry parameter and surface modification. The dimensionless numbers, Ch (Channel number) and Sf (Surface number), were proposed to describe the effect of the channel geometry and surface modification on the ratio of CHF in microgravity to that in normal gravity (CHF mu g/CHF1g). An empirical correlation based on We (Weber number), Ch and Sf was proposed to predict the value of CHF mu g/CHF1g ratio in good agreement with the experimental data. This study provides a new perspective to determine the threshold inlet velocity of inertial-force-dominant flow boiling under different experimental conditions at different gravity levels

WIJAM: a mobile collaborative improvisation platform under Master-players Paradigm

Music jamming is an extremely difficult task for musical novices. Trying to extend this meaningful and highly enjoyable activity to a larger recipient group, we present WIJAM, a mobile application for an ad-hoc group of musical novices to perform improvisation along with a music master. In this master-players' paradigm, the master offers a music backing, orchestrates the musical flow, and gives feedbacks to the players; the players improvise by tapping and sketching on their smartphones. We argue that this paradigm can be a significant contribution to the possibility of music playing by a group of novices with no instrumental training leading to decent musical results.published_or_final_versio

QTL analysis of production traits on SSC3 in a Large White×Meishan pig resource family

In order to locate the genetic regions that are responsible for economically important traits, a resource population was established by crossing Large White boars and Meishan sows. Phenotypic data of a total of 287 F2 offspring were collected from 1998 to 2000 and QTL analysis conducted using nine microsatellites on Sus scrofa chromosome 3 (SSC3). Least square regression interval mapping revealed two significant QTL effects on dressing percentage and moisture in m. longissimus dorsi, respectively. They were located at 136 cM and 22 cM in the genetic linkage map, near the marker Sw349 and Swr1637, respectively. QTL for dressing percentage had an additive effect of -1.035 ± 0.296% and a dominance effect of 1.056 ± 0.481%, and the explained phenotypic variance was 15.9%. The additive and dominance effects of QTL for moisture in m. longissimus dorsi were -0.025 ± 0.076% and 0.365 ± 0.101%, respectively, indicating that this QTL seemed to be significantly dominant in action. The present study confirms previously identified QTL and provides an important step in the search for the actual major genes involved in the traits of economic interest. South African Journal of Animal Science Vol. 36(2) 2006: 122-12

Modulation of human cardiac transient outward potassium current by EGFR tyrosine kinase and Src-family kinases

Aims: The human cardiac transient outward K + current Ito (encoded by Kv4.3 or KCND3) plays an important role in phase 1 rapid repolarization of cardiac action potentials in the heart. However, modulation of I to by intracellular signal transduction is not fully understood. The present study was therefore designed to determine whether/how human atrial I to and hKv4.3 channels stably expressed in HEK 293 cells are regulated by protein tyrosine kinases (PTKs). Methods and results: Whole-cell patch voltage-clamp, immunoprecipitation, western blotting, and site-directed mutagenesis approaches were employed in the present study. We found that human atrial I to was inhibited by the broad-spectrum PTK inhibitor genistein, the selective epidermal growth factor receptor (EGFR) kinase inhibitor AG556, and the Src-family kinases inhibitor PP2. The inhibitory effect was countered by the protein tyrosine phosphatase inhibitor orthovanadate. In HEK 293 cells stably expressing human KCND3, genistein, AG556, and PP2 significantly reduced the hKv4.3 current, and the reduction was antagonized by orthovanadate. Interestingly, orthovanadate also reversed the reduced tyrosine phosphorylation level of hKv4.3 channels by genistein, AG556, or PP2. Mutagenesis revealed that the hKv4.3 mutant Y136F lost the inhibitory response to AG556, while Y108F lost response to PP2. The double-mutant Y108FY136F hKv4.3 channels showed no response to either AG556 or PP2. Conclusion: Our results demonstrate that human atrial Ito and cloned hKv4.3 channels are modulated by EGFR kinase via phosphorylation of the Y136 residue and by Src-family kinases via phosphorylation of the Y108 residue; tyrosine phosphorylation of the channel may be involved in regulating cardiac electrophysiology. © The Author 2011.postprin

Surface plasmon-enhanced electroluminescence in organic light-emitting diodes incorporating Au nanoparticles

Surface plasmon-enhanced electroluminescence (EL) in an organic light-emitting diode is demonstrated by incorporating the synthesized Au nanoparticles (NPs) in the hole injection layer of poly(3,4-ethylene dioxythiophene):polystyrene sulfonic acid. An increase of ∼25% in the EL intensity and efficiency are achieved for devices with Au NPs, whereas the spectral and electrical properties remain almost identical to the control device. Time-resolved photoluminescence spectroscopy reveals that the EL enhancement is ascribed to the increase in spontaneous emission rate due to the plasmonic near-field effect induced by Au NPs. © 2012 American Institute of Physics

Rivaroxaban Versus Dabigatran or Warfarin in Real-World Studies of Stroke Prevention in Atrial Fibrillation

Background and Purpose— This study was designed to evaluate the effectiveness and safety of rivaroxaban in real-world practice compared with effectiveness and safety of dabigatran or warfarin for stroke prevention in atrial fibrillation through meta-analyzing observational studies. Methods— Seventeen studies were included after searching in PubMed for studies reporting the comparative effectiveness and safety of rivaroxaban versus dabigatran (n=3), rivaroxaban versus Warfarin (n=11), or both (n=3) for stroke prevention in atrial fibrillation. Results— Overall, the risks of stroke/systematic thromboembolism with rivaroxaban were similar when compared with those with dabigatran (stroke/thromboembolism: hazard ratio, 1.02; 95% confidence interval, 0.91–1.13; I2=70.2%, N=5), but were significantly reduced when compared with those with warfarin (hazard ratio, 0.75; 95% confidence interval, 0.64–0.85; I2=45.1%, N=9). Major bleeding risk was significantly higher with rivaroxaban than with dabigatran (hazard ratio, 1.38; 95% confidence interval, 1.27–1.49; I2=26.1%, N=5), but similar to that with warfarin (hazard ratio, 0.99; 95% confidence interval, 0.91–1.07; I2=0.0%, N=6). Rivaroxaban was associated with increased all-cause mortality and gastrointestinal bleeding, but similar risk of acute myocardial infarction and intracranial hemorrhage when compared with dabigatran. When compared with warfarin, rivaroxaban was associated with similar risk of any bleeding, mortality, and acute myocardial infarction, but a higher risk of gastrointestinal bleeding and lower risk of intracranial hemorrhage. Conclusions— In this systematic review and meta-analysis, rivaroxaban was as effective as dabigatran, but was more effective than warfarin for the prevention of stroke/thromboembolism in atrial fibrillation patients. Major bleeding risk was significantly higher with rivaroxaban than with dabigatran, as was all-cause mortality and gastrointestinal bleeding. Rivaroxaban was comparable to warfarin for major bleeding, with an increased risk in gastrointestinal bleeding and decreased risk of intracranial hemorrhage

Establishment of a normal medakafish spermatogonial cell line capable of sperm production in vitro

Spermatogonia are the male germ stem cells that continuously produce sperm for the next generation. Spermatogenesis is a complicated process that proceeds through mitotic phase of stem cell renewal and differentiation, meiotic phase, and postmeiotic phase of spermiogenesis. Full recapitulation of spermatogenesis in vitro has been impossible, as generation of normal spermatogonial stem cell lines without immortalization and production of motile sperm from these cells after long-term culture have not been achieved. Here we report the derivation of a normal spermatogonial cell line from a mature medakafish testis without immortalization. After 140 passages during 2 years of culture, this cell line retains stable but growth factor-dependent proliferation, a diploid karyotype, and the phenotype and gene expression pattern of spermatogonial stem cells. Furthermore, we show that this cell line can undergo meiosis and spermiogenesis to generate motile sperm. Therefore, the ability of continuous proliferation and sperm production in culture is an intrinsic property of medaka spermatogonial stem cells, and immortalization apparently is not necessary to derive male germ cell cultures. Our findings and cell line will offer a unique opportunity to study and recapitulate spermatogenesis in vitro and to develop approaches for germ-line transmission.Spermatogonia are the male germ stem cells that continuously produce sperm for the next generation. Spermatogenesis is a complicated process that proceeds through mitotic phase of stem cell renewal and differentiation, meiotic phase, and postmeiotic phase of spermiogenesis. Full recapitulation of spermatogenesis in vitro has been impossible, as generation of normal spermatogonial stem cell lines without immortalization and production of motile sperm from these cells after long-term culture have not been achieved. Here we report the derivation of a normal spermatogonial cell line from a mature medakafish testis without immortalization. After 140 passages during 2 years of culture, this cell line retains stable but growth factor-dependent proliferation, a diploid karyotype, and the phenotype and gene expression pattern of spermatogonial stem cells. Furthermore, we show that this cell line can undergo meiosis and spermiogenesis to generate motile sperm. Therefore, the ability of continuous proliferation and sperm production in culture is an intrinsic property of medaka spermatogonial stem cells, and immortalization apparently is not necessary to derive male germ cell cultures. Our findings and cell line will offer a unique opportunity to study and recapitulate spermatogenesis in vitro and to develop approaches for germ-line transmission

Genetic diversity of plankton community as depicted by PCR-DGGE fingerprinting and its relation to morphological composition and environmental factors in lake donghu

To collect information about the genetic diversity of the plankton community and to study how plankton respond to environmental conditions, plankton samples were collected from five stations representing different trophic levels in a shallow, eutrophic lake (Lake Donghu), and investigated by PCR-DGGE fingerprinting. A total of 100 bands (61 of 16S rDNA bands and 39 of 18S rDNA bands) were detected. The DGGE bands unique to any single station accounted for 38% of the total bands, whereas common bands detected at all five stations accounted for only 11%. Using UPGMA clustering and MDS ordination of DGGE fingerprints, stations I and II were found to initially group together into one cluster, which was later joined by station V. Stations III and IV were isolated into two separate groups of one station each. Some differences in grouping relationships were found when analysis was completed on the basis of chemical characteristics and morphological composition, with zooplankton composition showing the greatest variability. However, the most similar stations (I and II) were always initially grouped into one cluster. Moreover, stations that exhibited the same or similar trophic level (stations III and IV), but different concentrations of heavy metals, were further differentiated by the DGGE method. Results of the present study indicated that PCR-DGGE fingerprinting was more sensitive than the traditional methods, as other studies suggested. Additionally, PCR-DGGE appears to be more appropriate for diversity characterization of the plankton community, as it is more canonical, systematic, and effective. Most importantly, fingerprinting results are more convenient for the comparative analyses between different studies. Therefore, the use of the described fingerprinting analysis may provide an operable and sensitive biomonitoring approach to identify critical, and potentially negative, stress within an aquatic ecosystem.To collect information about the genetic diversity of the plankton community and to study how plankton respond to environmental conditions, plankton samples were collected from five stations representing different trophic levels in a shallow, eutrophic lake (Lake Donghu), and investigated by PCR-DGGE fingerprinting. A total of 100 bands (61 of 16S rDNA bands and 39 of 18S rDNA bands) were detected. The DGGE bands unique to any single station accounted for 38% of the total bands, whereas common bands detected at all five stations accounted for only 11%. Using UPGMA clustering and MDS ordination of DGGE fingerprints, stations I and II were found to initially group together into one cluster, which was later joined by station V. Stations III and IV were isolated into two separate groups of one station each. Some differences in grouping relationships were found when analysis was completed on the basis of chemical characteristics and morphological composition, with zooplankton composition showing the greatest variability. However, the most similar stations (I and II) were always initially grouped into one cluster. Moreover, stations that exhibited the same or similar trophic level (stations III and IV), but different concentrations of heavy metals, were further differentiated by the DGGE method. Results of the present study indicated that PCR-DGGE fingerprinting was more sensitive than the traditional methods, as other studies suggested. Additionally, PCR-DGGE appears to be more appropriate for diversity characterization of the plankton community, as it is more canonical, systematic, and effective. Most importantly, fingerprinting results are more convenient for the comparative analyses between different studies. Therefore, the use of the described fingerprinting analysis may provide an operable and sensitive biomonitoring approach to identify critical, and potentially negative, stress within an aquatic ecosystem

Performance of the self-Q-switched Cr,Yb : YAG laser

We report on the spectral properties of Cr, Yb:YAG crystal co-doped with 0.025 at.% Cr and 10 at.% Yb are reported. Using a continuous wave Ti:sapphire laser as a pumping source, we have demonstrated the self-Q-switched Cr,Yb:YAG laser at room temperature. 1 c obtained an average output power as much as 75 mW at 1.03 mum with a pulse width (FWHM) as short as 0.4 mus. The laser experiment demonstrated that the Cr,Yb:YAG crystal exactly combines the Cr4+ saturable absorber and Yb3+ gain medium. The Cr, Yb: YAG crystal can be a most promising self-Q-switched laser crystal for compact and efficient solid-state lasers

Passively Q-switched Yb : YAG laser with Cr4+: YAG as the saturable absorber

By using a continuous-wave Ti:sapphire laser as a pumping source, we demonstrated a passively Q-switched Yb:YAG laser at room temperature with Cr4+:YAG as the saturable absorber. We achieved an average output power of as much as 55 mW at 1.03 mum with a pulse width (FWHM) as short as 350 ns. The initial transmission of the Cr4+:YAG has an effect on the pulse duration (FWHM) and the repetition rate of the Yb:YAG passively Q-switched laser. The Yb:YAG crystal can be a most promising passively Q-switched laser crystal for compact, efficient, solid-state lasers. (C) 2001 Optical Society of America