Superconductivity-induced Phonon Renormalization on NaFe1−x_{1-x}Cox_{x}As

We report a study of the lattice dynamics in superconducting NaFeAs (Tc = 8 K) and doped NaFe0.97Co0.03As (Tc = 20 K) using Raman light scattering. Five of the six phonon modes expected from group theory are observed. In contrast with results obtained on iso-structural and iso-electronic LiFeAs, anomalous broadening of Eg(As) and A1g(Na) modes upon cooling is observed in both samples. In addition, in the Co-doped sample, a superconductivity-induced renormalization of the frequency and linewidth of the B1g(Fe) vibration is observed. This renormalization can not be understood within a single band and simple multi-band approaches. A theoretical model that includes the effects of SDW correlations along with sign-changing s-wave pairing state and interband scattering has been developed to explain the observed behavior of the B1g(Fe) mode.Comment: 10 pages; 6 figure

Raman Scattering Study of the Lattice Dynamics of Superconducting LiFeAs

We report an investigation of the lattice dynamical properties of LiFeAs using inelastic light scattering. Five out of the six expected phonon modes are observed. The temperature evolution of their frequencies and linewidths is in good agreement with an anharmonic-decay model. We find no evidence for substantial electron-phonon coupling, and no superconductivity-induced phonon anomalies.Comment: 5 pages, 3 figures, 1 tabl

Phonon arithmetic in a trapped ion system

Single-quantum level operations are important tools to manipulate a quantum state. Annihilation or creation of single particles translates a quantum state to another by adding or subtracting a particle, depending on how many are already in the given state. The operations are probabilistic and the success rate has yet been low in their experimental realization. Here we experimentally demonstrate (near) deterministic addition and subtraction of a bosonic particle, in particular a phonon of ionic motion in a harmonic potential. We realize the operations by coupling phonons to an auxiliary two-level system and applying transitionless adiabatic passage. We show handy repetition of the operations on various initial states and demonstrate by the reconstruction of the density matrices that the operations preserve coherences. We observe the transformation of a classical state to a highly non-classical one and a Gaussian state to a non-Gaussian one by applying a sequence of operations deterministically

Proteolytic degradation and potential role of onconeural protein cdr2 in neurodegeneration

Cerebellar degeneration-related protein 2 (cdr2) is expressed in the central nervous system, and its ectopic expression in tumor cells of patients with gynecological malignancies elicits immune responses by cdr2-specific autoantibodies and T lymphocytes, leading to neurological symptoms. However, little is known about the regulation and function of cdr2 in neurodegenerative diseases. Because we found that cdr2 is highly expressed in the midbrain, we investigated the role of cdr2 in experimental models of Parkinson's disease (PD). We found that cdr2 levels were significantly reduced after stereotaxic injection of 1-methyl-4-phenylpyridinium (MPP+) into the striatum. cdr2 levels were also decreased in the brains of post-mortem PD patients. Using primary cultures of mesencephalic neurons and MN9D cells, we confirmed that MPP + reduces cdr2 in tyrosine hydroxylase-positive dopaminergic neuronal cells. The MPP+-induced decrease of cdr2 was primarily caused by calpain-and ubiquitin proteasome system-mediated degradation, and cotreatment with pharmacological inhibitors of these enzymes or overexpression of calcium-binding protein rendered cells less vulnerable to MPP+-mediated cytotoxicity. Consequently, overexpression of cdr2 rescued cells from MPP+-induced cytotoxicity, whereas knockdown of cdr2 accelerated toxicity. Collectively, our findings provide insights into the novel regulatory mechanism and potentially protective role of onconeural protein during dopaminergic neurodegeneration. © 2016 Macmillan Publishers Limited All rights reserved.1

Towards video streaming in IoT environments: vehicular communication perspective

Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues

Effects of different reference periods on drought index (SPEI) estimations from 1901 to 2014

This study aims to understand how different reference periods (i.e., calibration periods) of climate data used to estimate drought indices influence regional drought assessments. Specifically, we investigate the influences of different reference periods on historical drought characteristics, such as the trend, frequency, intensity and spatial extent, using the standardized precipitation evapotranspiration index (SPEI) with a 12-month lag (SPEI-12), which was estimated from the datasets of the Climate Research Unit (CRU) and the University of Delaware (UDEL). For the 1901–1957 (P1) and 1958–2014 (P2) estimation periods, three different types of reference periods are used to compute the SPEI: P1 and P2 together, P1 and P2 separately and P1 only. Focusing on East Asia, Europe, the United States and West Africa, we find that the influence of the reference period is significant in East Asia and West Africa, with dominant drying trends from P1 to P2. The reference period influenced the assessment of drought characteristics, particularly the severity and spatial extent, whereas the influence on the frequency was relatively small. Finally, self-calibration, which is the most common practice for indices such as the SPEI, tends to underestimate the drought severity and spatial extent relative to the other approaches used in this study. Although the conclusions drawn in this study are limited by the use of two global datasets, they highlight the need for clarification of the reference period in drought assessments to better understand regional drought characteristics and the associated temporal changes, particularly under climate change scenarios

Effect of betaine and ascorbic acid in drinking water on growth performance and blood biomarkers in meat ducks exposed to heat stress

The aim of this study was to compare the effect of drinking water that contains various levels of ascorbic acid (AA) and betaine (BT) on growth performance and blood biomarkers in meat ducks exposed to heat stress. Six hundred and forty one-day-old Cherry Valley ducks were randomly assigned to one of seven treatment groups: i) control group, drinking water without ascorbic acid or betaine, ii) AA100, drinking water containing ascorbic acid at 100 milligrams per litre, iii) AA200, drinking water containing ascorbic acid at 200 milligrams per litre, iv) AA300, drinking water containing ascorbic acid at 300 milligrams per litre, v) BT400, drinking water containing betaine at 400 milligrams per litre, vi) BT800, drinking water containing betaine at 800 milligrams per litre, and vii) BT1200, drinking water containing betaine at 1200 milligrams per litre. The ducks were exposed to heat stress (11:00 to 17:00, 33 °C to 43 °C, relative humidity 70%, artificially controlled-environment houses) from the 22nd to 42nd days. Ducks from treatment groups AA300 and BT1200 displayed significantly increased bodyweight gains compared with those in the control group. Blood levels of glucose, and activities of aspartate aminotransferase and alanine aminotransferase in all treatment groups were significantly lower than those observed in the control group. Red blood cell count, platelet number, electrolytes and blood gas concentrations were significantly higher in all treatment groups compared with those in the control group. Blood pH levels in all treatment groups were lower than those in the control group. In conclusion, drinking water containing ascorbic acid or betaine improved the growth performance via biomarker homeostasis in blood of meat ducks exposed to heat stress.Keywords: body weight gain, blood lipid, red blood cell, electrolytes; blood gas, blood p

Secrecy Results for Compound Wiretap Channels

We derive a lower bound on the secrecy capacity of the compound wiretap channel with channel state information at the transmitter which matches the general upper bound on the secrecy capacity of general compound wiretap channels given by Liang et al. and thus establishing a full coding theorem in this case. We achieve this with a stronger secrecy criterion and the maximum error probability criterion, and with a decoder that is robust against the effect of randomisation in the encoding. This relieves us from the need of decoding the randomisation parameter which is in general not possible within this model. Moreover we prove a lower bound on the secrecy capacity of the compound wiretap channel without channel state information and derive a multi-letter expression for the capacity in this communication scenario.Comment: 25 pages, 1 figure. Accepted for publication in the journal "Problems of Information Transmission". Some of the results were presented at the ITW 2011 Paraty [arXiv:1103.0135] and published in the conference paper available at the IEEE Xplor

A global method for coupling transport with chemistry in heterogeneous porous media

Modeling reactive transport in porous media, using a local chemical equilibrium assumption, leads to a system of advection-diffusion PDE's coupled with algebraic equations. When solving this coupled system, the algebraic equations have to be solved at each grid point for each chemical species and at each time step. This leads to a coupled non-linear system. In this paper a global solution approach that enables to keep the software codes for transport and chemistry distinct is proposed. The method applies the Newton-Krylov framework to the formulation for reactive transport used in operator splitting. The method is formulated in terms of total mobile and total fixed concentrations and uses the chemical solver as a black box, as it only requires that on be able to solve chemical equilibrium problems (and compute derivatives), without having to know the solution method. An additional advantage of the Newton-Krylov method is that the Jacobian is only needed as an operator in a Jacobian matrix times vector product. The proposed method is tested on the MoMaS reactive transport benchmark.Comment: Computational Geosciences (2009) http://www.springerlink.com/content/933p55085742m203/?p=db14bb8c399b49979ba8389a3cae1b0f&pi=1

“It Is Me Who Endures but My Family That Suffers”: Social Isolation as a Consequence of the Household Cost Burden of Buruli Ulcer Free of Charge Hospital Treatment

Despite free of charge biomedical treatment, the cost burden of Buruli ulcer disease (Bu) hospitalisation in Central Cameroon accounts for 25% of households' yearly earnings, surpassing the threshold of 10%, which is generally considered catastrophic for the household economy, and calling into question the sustainability of current Bu programmes. The high non-medical costs and productivity loss for Bu patients and their households make household involvement in the healing process unsustainable. 63% of households cease providing social and financial support for patients as a coping strategy, resulting in the patient's isolation at the hospital. Social isolation itself was cited by in-patients as the principal cause for abandonment of biomedical treatment. These findings demonstrate that further research and investment in Bu are urgently needed to evaluate new intervention strategies that are socially acceptable and appropriate in the local context